Sustainability-driven atomistic model for exploring the mechanical properties of low carbon limestone calcined clay cement (LC3)

[1]  Yang Zhang,et al.  Modeling progressive failure and crack evolution in a randomly distributed fiber system via a coupled phase-field cohesive model , 2023, Composite Structures.

[2]  Hehua Zhu,et al.  Uniaxial tensile properties of multi-scale fiber reinforced rubberized concrete after exposure to elevated temperatures , 2023, Journal of Cleaner Production.

[3]  Baoshan Huang,et al.  Influence of size effect on the properties of slag and waste glass-based geopolymer paste , 2023, Journal of Cleaner Production.

[4]  K. M. Liew,et al.  Modeling via peridynamics for large deformation and progressive fracture of hyperelastic materials , 2023, Computer Methods in Applied Mechanics and Engineering.

[5]  Hehua Zhu,et al.  Influence of multi-scale fiber on residual compressive properties of a novel rubberized concrete subjected to elevated temperatures , 2022, Journal of Building Engineering.

[6]  J. W. Ju,et al.  Insights into the thermal effect on the fracture toughness of calcium silicate hydrate grains: A reactive molecular dynamics study , 2022, Cement and Concrete Composites.

[7]  Zhengqi Zhang,et al.  Interfacial characteristics and mechanical behaviors of geopolymer binder with steel slag aggregate: Insights from molecular dynamics , 2022, Journal of Cleaner Production.

[8]  F. Xing,et al.  Performance evaluation of recycled aggregate concrete incorporating limestone calcined clay cement (LC3) , 2022, Journal of Cleaner Production.

[9]  O. Cascudo,et al.  Water self-diffusion in C-S-H: Effect of confinement and temperature studied by molecular dynamics , 2022, Cement and Concrete Research.

[10]  J. W. Ju,et al.  Insights into the effect of high temperature on the shear behavior of the calcium silicate hydrate by reactive molecular dynamics simulations , 2022, International Journal of Damage Mechanics.

[11]  Baoshan Huang,et al.  A state-of-the-art review of crushed urban waste glass used in OPC and AAMs (geopolymer): Progress and challenges , 2022, Cleaner Materials.

[12]  Wei Xu,et al.  Molecular dynamics simulations of the distance between the cavitation bubble and benzamide wall impacting collapse characteristics , 2022, Journal of Cleaner Production.

[13]  S. Pradhan,et al.  Impact of service life and system boundaries on life cycle assessment of sustainable concrete mixes , 2022, Journal of Cleaner Production.

[14]  Baoshan Huang,et al.  Influence of waste glass powder as a supplementary cementitious material (SCM) on physical and mechanical properties of cement paste under high temperatures , 2022, Journal of Cleaner Production.

[15]  S. Baroutian,et al.  Hydrothermal deconstruction of two antibiotics (amoxicillin and metronidazole) , 2021, Journal of Cleaner Production.

[16]  K. Scrivener,et al.  Limestone calcined clay cement and concrete: A state-of-the-art review , 2021 .

[17]  Taher Baghaee Moghaddam,et al.  Synergistic effects of iron (Fe) and biochar on light-weight geopolymers when used in wastewater treatment applications , 2021, Journal of Cleaner Production.

[18]  Z. Shui,et al.  Development of a novel eco-efficient LC2 conceptual cement based ultra-high performance concrete (UHPC) incorporating limestone powder and calcined clay tailings: Design and performances , 2021 .

[19]  A. Iizuka,et al.  Calculation of greenhouse gas emissions for a carbon recycling system using mineral carbon capture and utilization technology in the cement industry , 2021, Journal of Cleaner Production.

[20]  T. Rabczuk,et al.  First‐Principles Multiscale Modeling of Mechanical Properties in Graphene/Borophene Heterostructures Empowered by Machine‐Learning Interatomic Potentials , 2021, Advanced materials.

[21]  Daniel C W Tsang,et al.  On the use of limestone calcined clay cement (LC3) in high-strength strain-hardening cement-based composites (HS-SHCC) , 2021 .

[22]  K. M. Liew,et al.  New insights into creep characteristics of calcium silicate hydrates at molecular level , 2021 .

[23]  J. W. Ju,et al.  New insights into the mechanism governing the elasticity of calcium silicate hydrate gels exposed to high temperature: A molecular dynamics study , 2021 .

[24]  L. W. Zhang,et al.  Atomistic insights into structure evolution and mechanical property of calcium silicate hydrates influenced by nuclear waste caesium. , 2021, Journal of hazardous materials.

[25]  B. Dong,et al.  Insights into the interfacial strengthening mechanism of waste rubber/cement paste using polyvinyl alcohol: Experimental and molecular dynamics study , 2020 .

[26]  K. Scrivener,et al.  Effect of temperature on the water content of C-A-S-H in plain Portland and blended cements , 2020 .

[27]  Baoshan Huang,et al.  A laboratory investigation of steel to fly ash-based geopolymer paste bonding behavior after exposure to elevated temperatures , 2020 .

[28]  D. Hou,et al.  Insights on the molecular structure evolution for tricalcium silicate and slag composite: From 29Si and 27Al NMR to molecular dynamics , 2020 .

[29]  Arslan Akbar,et al.  Assessing recycling potential of carbon fiber reinforced plastic waste in production of eco-efficient cement-based materials , 2020 .

[30]  C. Poon,et al.  Effects of sodium/calcium cation exchange on the mechanical properties of calcium silicate hydrate (C-S-H) , 2020 .

[31]  K. Liew,et al.  Carbon nanotube-geopolymer nanocomposites: A molecular dynamics study of the influence of interfacial chemical bonding upon the structural and mechanical properties , 2020 .

[32]  O. Swang,et al.  Structure, hydration, and chloride ingress in C-S-H: Insight from DFT calculations , 2020 .

[33]  R. Mahjoub,et al.  Natural Kenaf Fiber and LC3 Binder for Sustainable Fiber-Reinforced Cementitious Composite: A Review , 2020 .

[34]  Shengwen Tang,et al.  The interactions between water molecules and C-S-H surfaces in loads-induced nanopores: A molecular dynamics study , 2019 .

[35]  Wei Sun,et al.  Quantification methods for chloride binding in Portland cement and limestone systems , 2019, Cement and Concrete Research.

[36]  Qinfei Li.  THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CEMENTITIOUS MATERIALS COMPRISED OF LIMESTONE, CALCINED CLAY AND CLINKER , 2019, Ceramics - Silikaty.

[37]  K. Liew,et al.  Graphene and graphene oxide in calcium silicate hydrates: Chemical reactions, mechanical behavior and interfacial sliding , 2019, Carbon.

[38]  Tulio Honorio.  Monte Carlo Molecular Modeling of Temperature and Pressure Effects on the Interactions between Crystalline Calcium Silicate Hydrate Layers. , 2019, Langmuir : the ACS journal of surfaces and colloids.

[39]  K. Scrivener,et al.  Performance of Limestone Calcined Clay Cement (LC3) with various kaolinite contents with respect to chloride transport , 2018, Materials and Structures.

[40]  H. Manzano,et al.  Cs retention and diffusion in C-S-H at different Ca/Si ratio , 2018, Cement and Concrete Research.

[41]  Dongshuai Hou,et al.  Structure, Dynamics, and Mechanical Properties of Cross-Linked Calcium Aluminosilicate Hydrate: A Molecular Dynamics Study , 2018, ACS Sustainable Chemistry & Engineering.

[42]  S. C. Parker,et al.  An atomistic building block description of C-S-H - Towards a realistic C-S-H model , 2018 .

[43]  R. Pillai,et al.  Mechanical properties and durability performance of concretes with Limestone Calcined Clay Cement (LC3) , 2018 .

[44]  K. Scrivener,et al.  Investigation of the calcined kaolinite content on the hydration of Limestone Calcined Clay Cement (LC3) , 2018 .

[45]  K. Scrivener,et al.  Calcined clay limestone cements (LC3) , 2017, Cement and Concrete Research.

[46]  M. Santhanam,et al.  Assessment of pore structure evolution in the limestone calcined clay cementitious system and its implications for performance , 2017 .

[47]  T. Zhao,et al.  Insights on molecular structure and micro-properties of alkali-activated slag materials: A reactive molecular dynamics study , 2017 .

[48]  A. Kalinichev,et al.  Quantifying the mechanisms of site-specific ion exchange at an inhomogeneously charged surface: Case of Cs+/K+ on hydrated muscovite mica , 2017 .

[49]  Aurélie Favier,et al.  Assessing the environmental and economic potential of Limestone Calcined Clay Cement in Cuba , 2016 .

[50]  A. Nonat,et al.  Calcium silicate hydrates: Solid and liquid phase composition , 2015 .

[51]  G. Saoût,et al.  Incorporation of aluminium in calcium-silicate-hydrates , 2015 .

[52]  Hongyan Ma,et al.  Reactive Molecular Simulation on Water Confined in the Nanopores of the Calcium Silicate Hydrate Gel: Structure, Reactivity, and Mechanical Properties , 2015 .

[53]  K. V. Van Vliet,et al.  Combinatorial molecular optimization of cement hydrates , 2014, Nature Communications.

[54]  Zongjin Li,et al.  Mechanical properties of calcium silicate hydrate (C–S–H) at nano-scale: A molecular dynamics study , 2014 .

[55]  Hongyan Ma,et al.  Calcium Silicate Hydrate from Dry to Saturated State: Structure, Dynamics and Mechanical Properties , 2014 .

[56]  Marie D. Jackson,et al.  Unlocking the secrets of Al-tobermorite in Roman seawater concrete , 2013 .

[57]  S. Bernal,et al.  Generalized structural description of calcium-sodium aluminosilicate hydrate gels: the cross-linked substituted tobermorite model. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[58]  Alejandra Tironi,et al.  Assessment of pozzolanic activity of different calcined clays , 2013 .

[59]  Karen Scrivener,et al.  Cement substitution by a combination of metakaolin and limestone , 2012 .

[60]  J. J. Kim,et al.  Examining microstructural composition of hardened cement paste cured under high temperature and pressure using nanoindentation and 29Si MAS NMR , 2012, Applied Nanoscience.

[61]  Markus J Buehler,et al.  A realistic molecular model of cement hydrates , 2009, Proceedings of the National Academy of Sciences.

[62]  J. Beaudoin,et al.  A 29Si MAS NMR study of modified C-S-H nanostructures , 2009 .

[63]  H. Heinz,et al.  Molecular models and simulations of layered materials , 2009 .

[64]  A. Nonat.  THE STRUCTURE AND STOICHIOMETRY OF C-S-H , 2004 .

[65]  H. Taylor,et al.  Solubility and structure of calcium silicate hydrate , 2004 .

[66]  Randall T. Cygan,et al.  Molecular Models of Hydroxide, Oxyhydroxide, and Clay Phases and the Development of a General Force Field , 2004 .

[67]  A. V. Duin,et al.  ReaxFF: A Reactive Force Field for Hydrocarbons , 2001 .

[68]  Edgardo F. Irassar,et al.  Studies on the carboaluminate formation in limestone filler-blended cements , 2001 .

[69]  X. Cong,et al.  29Si MAS NMR study of the structure of calcium silicate hydrate , 1996 .

[70]  Steve Plimpton,et al.  Fast parallel algorithms for short-range molecular dynamics , 1993 .

[71]  K. Scrivener,et al.  Investigation of C-A-S-H composition, morphology and density in Limestone Calcined Clay Cement (LC3) , 2019, Cement and Concrete Research.

[72]  J. Ston,et al.  Autogenous Shrinkage and Creep of Limestone and Calcined Clay Based Binders , 2018 .

[73]  Aurélie Favier,et al.  Limestone calcined clay cement as a low carbon solution to meet expanding cement demand in emerging economies. , 2017 .

[74]  Timon Rabczuk,et al.  A computational library for multiscale modeling of material failure , 2013, Computational Mechanics.

[75]  J. F. Young,et al.  The role of Al in C-S-H: NMR, XRD, and compositional results for precipitated samples , 2006 .

[76]  H. Taylor.  726. Hydrated calcium silicates. Part I. Compound formation at ordinary temperatures , 1950 .