Dynamic Analysis Of Mechanical Systems With Imperfect Kinematic Joints

[1]  E. Haug,et al.  Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition-deletion—I theory , 1986 .

[2]  Steven Dubowsky,et al.  The Dynamic Modeling of Flexible Spatial Machine Systems With Clearance Connections , 1987 .

[3]  Ahmed A. Shabana,et al.  A continuous force model for the impact analysis of flexible multibody systems , 1987 .

[4]  J. J. Uicker,et al.  IMP (Integrated Mechanisms Program), A Computer-Aided Design Analysis System for Mechanisms and Linkage , 1972 .

[5]  B. H. Lee,et al.  Determination of the Feedback Coefficients for the Constraint Violation Stabilization Method , 1990 .

[6]  H. Movahedi-Lankarani.  Canonical equations of motion and estimation of parameters in the analysis of impact problems. , 1988 .

[7]  Aviv Rosen,et al.  Investigation of a New Formulation of the Lagrange Method for Constrained Dynamic Systems , 1994 .

[8]  Parviz E. Nikravesh,et al.  Some Methods for Dynamic Analysis of Constrained Mechanical Systems: A Survey , 1984 .

[9]  H. Elrod.  A Cavitation Algorithm , 1981 .

[10]  M. A. Chace,et al.  A Sparsity-Oriented Approach to the Dynamic Analysis and Design of Mechanical Systems—Part 1 , 1977 .

[11]  Werner Schiehlen,et al.  Multibody System Dynamics: Roots and Perspectives , 1997 .

[12]  Claudia M. Woods,et al.  The Solution of the Elrod Algorithm for a Dynamically Loaded Journal Bearing Using Multigrid Techniques , 1989 .

[13]  Steven Dubowsky.  On Predicting the Dynamic Effects of Clearances in One-Dimensional Closed Loop Systems , 1974 .

[14]  J. Uicker.  Dynamic Behavior of Spatial Linkages: Part 1—Exact Equations of Motion, Part 2—Small Oscillations About Equilibrium , 1969 .

[15]  S. J Grant,et al.  Effects of clearance at the coupler-rocker bearing of a 4-bar linkage , 1979 .

[16]  Hamid M. Lankarani,et al.  Dynamics of a Multibody Mechanical System With Lubricated Long Journal Bearings , 2005 .

[17]  R. Hibbeler.  Engineering Mechanics: Dynamics , 1986 .

[18]  M. O. M. Osman,et al.  On the Effect of Bearing Clearances in the Dynamic Analysis of Planar Mechanisms , 1979 .

[19]  R. S Haines,et al.  Survey: 2-dimensional motion and impact at revolute joints , 1980 .

[20]  Milton A. Chace.  Vector Analysis of Linkages , 1963 .

[21]  José Carlos Pimenta Claro,et al.  Influência da modelização das juntas na análise do desempenho de um mecanismo , 2002 .

[22]  M. T. Bengisu,et al.  A Theoretical and Experimental Investigation of Contact Loss in the Clearances of a Four-Bar Mechanism , 1986 .

[23]  W. M. Mansour,et al.  Mechanical Joints With Clearance: A Three-Mode Model , 1976 .

[24]  S. Shaw,et al.  Chaotic and periodic dynamics of a slider-crank mechanism with slider clearance , 1994 .

[25]  R. Brach,et al.  Mechanical Impact Dynamics: Rigid Body Collisions , 1991 .

[26]  J. Ambrósio,et al.  Stabilization Methods for the Integration of DAE in the Presence of Redundant Constraints , 2003 .

[27]  S. Wiggins.  Introduction to Applied Nonlinear Dynamical Systems and Chaos , 1989 .

[28]  Parviz E. Nikravesh,et al.  Computer-aided analysis of mechanical systems , 1988 .

[29]  Hamid M. Lankarani,et al.  A Contact Force Model With Hysteresis Damping for Impact Analysis of Multibody Systems , 1989 .

[30]  Jorge Ambrósio,et al.  Impact of Rigid and Flexible Multibody Systems: Deformation Description and Contact Models , 2003 .

[31]  Jorge Ambrósio,et al.  Dynamic Behavior of a Revolute Clearance Joint in Multibody Mechanical Systems , 2003 .

[32]  E. Haug,et al.  Generalized Coordinate Partitioning for Dimension Reduction in Analysis of Constrained Dynamic Systems , 1982 .

[33]  R. S. Haines.  A Theory of Contact Loss at Resolute Joints with Clearance , 1980 .

[34]  Tzong-Shi Liu,et al.  Dynamic analysis of flexible linkages with lubricated joints , 1990 .

[35]  Brian S. Thompson,et al.  A Theoretical and Experimental Investigation of the Dynamic Response of a Slider-Crank Mechanism With Radial Clearance in the Gudgeon-Pin Joint , 1990 .

[36]  J. Keller.  Impact With Friction , 1986 .

[37]  K. Mistry,et al.  A New Theoretical Model for Analysis of the Fluid Film in the Cavitation Zone of a Journal Bearing , 1997 .

[38]  Carlo Innocenti,et al.  Kinematic Clearance Sensitivity Analysis of Spatial Structures With Revolute Joints ( , 2002, DAC 2002.

[39]  M. A. Townsend,et al.  A Pendulating Model for Mechanisms With Clearances in the Revolutes , 1975 .

[40]  P. K. Goenka.  Analytical Curve Fits for Solution Parameters of Dynamically Loaded Journal Bearings , 1984 .

[41]  Per Grove Thomsen,et al.  Numerical Solution of Differential Algebraic Equations , 1999 .

[42]  M. T. Mason,et al.  Two-Dimensional Rigid-Body Collisions With Friction , 1992 .

[43]  O. Pinkus,et al.  Theory of Hydrodynamic Lubrication , 1962 .

[44]  K. Park,et al.  Stabilization of computational procedures for constrained dynamical systems , 1988 .

[45]  T. W. Lee,et al.  On The Dynamics of Intermittent-Motion Mechanisms. Part 1: Dynamic Model and Response , 1983 .

[46]  C. Baǧci.  Dynamic Motion Analysis of Plane Mechanisms With Coulomb and Viscous Damping via the Joint Force Analysis , 1975 .

[47]  S. Earles,et al.  A Determination of Contact-Loss at a Bearing of a Linkage Mechanism , 1977 .

[48]  Marco Ceccarelli,et al.  Trends in the drawing of mechanisms since the early Middle Ages , 2001 .

[49]  J. C. García Orden,et al.  Analysis of Joint Clearances in Multibody Systems , 2005 .

[50]  A. G. Erdman,et al.  LINCAGES: LINKAGE INTERACTIVE COMPUTER ANALYSIS AND GRAPHICALLY ENHANCED SYNTHESIS PACKAGE. , 1977 .

[51]  M. A. Chace.  Analysis of the Time-Dependence of Multi-Freedom Mechanical Systems in Relative Coordinates , 1967 .

[52]  Hamid M. Lankarani,et al.  Joint Clearances With Lubricated Long Bearings in Multibody Mechanical Systems , 2000 .

[53]  M. S. Pereira,et al.  Frictional Impact Analysis in Open-Loop Multibody Mechanical Systems , 1999 .

[54]  G. J. Jones,et al.  The Influence of Circumferential Waviness of the Journal on the Lubrication of Dynamically Loaded Journal Bearings , 1997 .

[55]  Bernard J. Hamrock,et al.  Theoretical and Experimental Comparison of Vapor Cavitation in Dynamically Loaded Journal Bearings , 1985 .

[56]  G. T. Rooney,et al.  Coulomb friction in mechanism sliding joints , 1982 .

[57]  M. A. Serna,et al.  A modified Lagrangian formulation for the dynamic analysis of constrained mechanical systems , 1988 .

[58]  Homer Rahnejat,et al.  Multi-body dynamics: Historical evolution and application , 2000 .

[59]  Takao Kakizaki,et al.  Modeling the Spatial Dynamics of Robotic Manipulators with Flexible Links and Joint Clearances , 1993 .

[60]  Frank Erskine Crossley,et al.  Recollections From Forty Years of Teaching Mechanisms , 1988 .

[61]  W. Philipzik.  Zur hydrodynamischen Theorie der Schmiermittelreibung , 1956 .

[62]  J. F. Booker.  Dynamically Loaded Journal Bearings: Mobility Method of Solution , 1965 .

[63]  A. Schwab.  Dynamics of flexible multibody systems: Small vibrations superimposed on a general rigid body motion , 2002 .

[64]  Jorge Ambrósio,et al.  Modeling Lubricated Revolute Clearance Joints in Multibody Mechanical Systems , 2003 .

[65]  Gregory L. Baker,et al.  Chaotic Dynamics: An Introduction , 1990 .

[66]  Jorge Ambrósio,et al.  Vehicle crashworthiness design and analysis by means of nonlinear flexible multibody dynamics , 2001 .

[67]  J. N. Fawcett,et al.  The oblique impact of elastic spheres , 1976 .

[68]  Ahmed A. Shabana,et al.  Dynamics of Multibody Systems , 2020 .

[69]  G. C. Andrews,et al.  Dynamic Simulation of Planar Mechanical Systems With Lubricated Bearing Clearances Using Vector-Network Methods , 1977 .

[70]  F. Pfeiffer,et al.  Unilateral problems of dynamics , 1999 .

[71]  Thomas R. Kane,et al.  THEORY AND APPLICATIONS , 1984 .

[72]  Edward J. Haug,et al.  Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition-deletion—II Planar systems , 1986 .

[73]  M. A. Townsend,et al.  Impact Spectra and Intensities for High-Speed Mechanisms , 1975 .

[74]  S. Dubowsky.  On Predicting the Dynamic Effects of Clearances in Planar Mechanisms , 1974 .

[75]  Ahmed A. Shabana,et al.  Flexible Multibody Dynamics: Review of Past and Recent Developments , 1997 .

[76]  N. Morita,et al.  A New Optimization Method for Dynamic Design of Planar Linkage With Clearances at Joints—Optimizing the Mass Distribution of Links to Reduce the Change of Joint Forces , 2002 .

[77]  Steven Dubowsky,et al.  An experimental and analytical study of impact forces in elastic mechanical systems with clearances , 1978 .

[78]  Hamid M. Lankarani,et al.  Continuous contact force models for impact analysis in multibody systems , 1994, Nonlinear Dynamics.

[79]  B. Hamrock,et al.  Fundamentals of Fluid Film Lubrication , 1994 .

[80]  J. Baumgarte.  A New Method of Stabilization for Holonomic Constraints , 1983 .

[81]  A. Akay,et al.  Dynamic response of a revolute joint with clearance , 1996 .

[82]  A. Shabana,et al.  Dynamic Analysis of Constrained System of Rigid and Flexible Bodies With Intermittent Motion , 1986 .

[83]  L. Seneviratne,et al.  Chaotic behaviour exhibited during contact loss in a clearance joint of a four-bar mechanism , 1992 .

[84]  K. H. Hunt,et al.  Coefficient of Restitution Interpreted as Damping in Vibroimpact , 1975 .

[85]  Arthur G. Erdman,et al.  Computer-aided design of mechanisms: 1984 and beyond , 1985 .

[86]  Jiann-Nan Huang,et al.  Stabilization of Baumgarte’s Method Using the Runge-Kutta Approach , 2002 .

[87]  Peter Ravn.  Analysis and Synthesis of Planar Mechanical Systems Including Flexibility, Contact and Joint Clearance , 1998 .

[88]  Wolfgang Rulka,et al.  SIMPACK — A Computer Program for Simulation of Large-motion Multibody Systems , 1990 .

[89]  Arthur G. Erdman,et al.  Computer-Aided Mechanism Design: Now and the Future , 1995 .

[90]  J. N Fawcett,et al.  Dynamics of the slider-crank mechanism with clearance in the sliding bearing , 1974 .

[91]  Steven Dubowsky,et al.  THE DYNAMIC ANALYSIS OF FLEXIBILITY IN MOBILE ROBOTIC MANIPULATOR SYSTEMS , 2000 .

[92]  Steven Dubowsky,et al.  On the Limitations of Predictions of the Dynamic Response of Machines with Clearance Connections , 1994 .

[93]  Ronald L. Huston,et al.  Multibody Dynamics — Modeling and Analysis Methods , 1991 .

[94]  H. Moes,et al.  Mobility and Impedance Tensor Methods for Full and Partial-Arc Journal Bearings , 1986 .

[95]  R. S. Haines.  An experimental investigation into the dynamic behaviour of revolute joints with varying degrees of clearance , 1985 .

[96]  Peter Ravn,et al.  A Continuous Analysis Method for Planar Multibody Systems with Joint Clearance , 1998 .

[97]  Jorge Alberto Cadete Ambrosio.  Elastic-plastic large deformation of flexible multibody systems in crash analysis. , 1991 .

[98]  Jang Moo Lee,et al.  Elastokinematic Analysis and Optimization of Suspension Compliance Characteristics , 1997 .

[99]  and D Dowson,et al.  Cavitation in Bearings , 1979 .

[100]  Jorge Ambrósio,et al.  A Novel Roller-Chain Drive Model Based on Multibody Dynamics Analysis Tools , 2003 .

[101]  Edward J. Haug,et al.  Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition-deletion—III Spatial systems , 1986 .

[102]  Parviz E. Nikravesh,et al.  An adaptive constraint violation stabilization method for dynamic analysis of mechanical systems , 1985 .

[103]  S. Dubowsky,et al.  An Analytical and Experimental Study of the Prediction of Impacts in Planar Mechanical Systems With Clearances , 1984 .

[104]  Marco Ceccarelli,et al.  Mechanism Schemes in Teaching: A Historical Overview , 1998 .

[105]  M. Géradin,et al.  Kinematics and dynamics of rigid and flexible mechanisms using finite elements and quaternion algebra , 1988 .

[106]  Edward J. Haug,et al.  Dynamic Analysis and Design of Constrained Mechanical Systems , 1981 .

[107]  Ferdinand Freudenstein,et al.  Dynamic Analysis of Mechanical Systems With Clearances—Part 2: Dynamic Response , 1971 .

[108]  R. E. Kaufman,et al.  MECHANISM DESIGN BY COMPUTER , 1978 .

[109]  R. C. Winfrey,et al.  Analysis of Elastic Machinery With Clearances , 1973 .

[110]  E. Haug.  Computer Aided Analysis and Optimization of Mechanical System Dynamics , 1984 .

[111]  S. H. Zhu,et al.  A theoretical formula for calculating damping in the impact of two bodies in a multibody system , 1999 .

[112]  Milton A. Chace.  Development and application of vector mathematics for kinematic analysis of three-dimensional mechanisms , 1964 .

[113]  Hamid M. Lankarani,et al.  A Poisson-Based Formulation for Frictional Impact Analysis of Multibody Mechanical Systems With Open or Closed Kinematic Chains , 2000 .

[114]  R. M. Howe,et al.  Geometric Elimination of Constraint Violations in Numerical Simulation of Lagrangian Equations , 1994 .

[115]  L. Shampine,et al.  Computer solution of ordinary differential equations : the initial value problem , 1975 .