Usage of UV-Curable Soybean Oil Based Coating Formulations for Pretreated Cotton Fabrics

[1]  A. Güngör,et al.  Usage of Cellulose Acetate Butyrate Based Oligomeric Structures on Cotton Fabric Coatings , 2020, Journal of the Turkish Chemical Society Section A: Chemistry.

[2]  Jan Jager,et al.  Photopolymer Resins with Biobased Methacrylates Based on Soybean Oil for Stereolithography , 2020, ACS Applied Polymer Materials.

[3]  F. Mousazadegan,et al.  Characterization of the effect of fabric's tensile behavior and sharp object properties on the resistance against penetration. , 2019, Forensic science international.

[4]  G. Acik.  Soybean Oil Modified Bio-based Poly(vinyl alcohol)s via Ring-Opening Polymerization , 2019, Journal of Polymers and the Environment.

[5]  Jihoon Shin,et al.  A crack repair patch based on acrylated epoxidized soybean oil , 2019, Applied Surface Science.

[6]  I. Jankovic Castvan,et al.  Influence of the alkali treatment on the sorption and dielectric properties of woven jute fabric , 2019, Cellulose.

[7]  H. Voorwald,et al.  Obtainment and characterization of nanocellulose from an unwoven industrial textile cotton waste: Effect of acid hydrolysis conditions. , 2019, International journal of biological macromolecules.

[8]  Aiting Wang,et al.  Preparation and Characterization of Cellulose Grafted with Epoxidized Soybean Oil Aerogels for Oil-Absorbing Materials. , 2019, Journal of agricultural and food chemistry.

[9]  Y. Lai,et al.  A novel strategy for fabricating robust superhydrophobic fabrics by environmentally-friendly enzyme etching , 2019, Chemical Engineering Journal.

[10]  K. Jacob,et al.  Effects of NCO/OH Ratio and Reactive Diluent Type on the Adhesion Strength of Polyurethane Methacrylates for Cord/Rubber Composites , 2018 .

[11]  Cuina Wang,et al.  High-Performance Soybean-Oil-Based Epoxy Acrylate Resins: “Green” Synthesis and Application in UV-Curable Coatings , 2018 .

[12]  Xianfeng Wang,et al.  Development of green waterborne UV-curable vegetable oil-based urethane acrylate pigment prints adhesive: Preparation and application , 2018 .

[13]  Behçet Becerir,et al.  Investigation of the relation between surface roughness and friction properties of polyester fabrics after abrasion , 2018 .

[14]  G. Acik,et al.  Soybean oil based thermoset networks via photoinduced CuAAC click chemistry , 2017 .

[15]  H. Al‐Lohedan,et al.  Micellar effect upon the rate of alkaline hydrolysis of carboxylic and carbonate esters , 2017 .

[16]  Ruimin Hu,et al.  Surface micro-dissolution process for embedding carbon nanotubes on cotton fabric as a conductive textile , 2017, Cellulose.

[17]  M. V. Kahraman,et al.  Photocrosslinked biobased phase change material for thermal energy storage , 2016 .

[18]  S. Umare,et al.  Effects of NCO:OH ratio and HEMA on the physicochemical properties of photocurable poly(ester-urethane)methacrylates , 2015, Journal of Coatings Technology and Research.

[19]  Sihyun Sung,et al.  UV‐curing and mechanical properties of polyester–acrylate nanocomposites films with silane‐modified antimony doped tin oxide nanoparticles , 2013 .

[20]  Emre Baştürk,et al.  Flame retardant UV-curable acrylated epoxidized soybean oil based organic–inorganic hybrid coating , 2013 .

[21]  M. Yazdanshenas,et al.  In situ synthesis of silver nanoparticles on alkali-treated cotton fabrics , 2013 .

[22]  L. Cheng,et al.  Synthesis and characterization of UV- and thermo-curable difunctional epoxyacrylates , 2012 .

[23]  A. Giessmann.  Coating Substrates and Textiles: A Practical Guide to Coating and Laminating Technologies , 2012 .

[24]  M. Bajpai,et al.  SYNTHESIS AND CHARACTERIZATION OF ACRYLATED EPOXIDIZED SOYBEAN OIL FOR UV CURED COATINGS , 2011 .

[25]  Zhigang Chen,et al.  Soy-based, high biorenewable content UV curable coatings , 2011 .

[26]  M. Bajpai,et al.  UV CURABLE HEAT RESISTANT EPOXY ACRYLATE COATINGS , 2010 .

[27]  Young-Jun Park,et al.  UV- and thermal-curing behaviors of dual-curable adhesives based on epoxy acrylate oligomers , 2009 .

[28]  Jin-Sang Hwang,et al.  Effects of soft segment mixtures with different molecular weight on the properties and reliability of UV curable adhesives for electrodes protection of plasma display panel (PDP) , 2009, Microelectron. Reliab..

[29]  John R. Mitchell,et al.  Changes in the intra- and inter-fibrillar structure of lyocell (TENCEL®) fibers caused by NaOH treatment , 2009 .

[30]  Ratna R. Sharma-Shivappa,et al.  A comparison of chemical pretreatment methods for improving saccharification of cotton stalks. , 2007, Bioresource technology.

[31]  W. Schnabel,et al.  Polymers and light , 2007 .

[32]  G. Bayramoglu,et al.  Synthesis and characterization of UV-curable dual hybrid oligomers based on epoxy acrylate containing pendant alkoxysilane groups , 2006 .

[33]  Y. Shul,et al.  A study on UV-curable adhesives for optical pick-up: I. Photo-initiator effects , 2005 .

[34]  V. Shukla,et al.  A study of the film properties of pigmented UV‐curable epoxidised soybean oil , 2004 .

[35]  Y. C. Chan,et al.  Investigation on bondability and reliability of UV-curable adhesive joints for stable mechanical properties in photonic device packaging , 2004, Microelectron. Reliab..

[36]  Manton J. Guers,et al.  Ultraviolet-curable polymers with chemically bonded carbon nanotubes for microelectromechanical system applications , 2002 .