The influence of solvent properties on the performance of polysulfone/β-cyclodextrin polyurethane mixed-matrix membranes

This study investigates the effect of solvent properties on the structural morphology and permeation properties of poly- sulfone=b-cyclodextrin polyurethane (PSf=b-CDPU) mixed-matrix membranes (MMMs). The membranes were prepared by a modi- fied phase-inversion route using four different casting solvents (dimethyl formamide (DMF), dimethyl sulfoxide (DMSO), dimethyl acetamide (DMA), and N-methyl-2-pyrrolidone (NMP)). While DMSO-based membranes demonstrated particularly high permeabil- ity (ca 147 L=m 2 h.bar), their crystallinity was low compared to MMMs prepared using DMA, DMF and NMP due to the formation of thin active layers on their surfaces. Cross-sectional morphology revealed that the MMMs have a dense top skin with finger-like inner pore structures. Membranes prepared using NMP displayed the highest hydrophilicity, porosity, and crystallinity due to the low volatility of NMP; DMF membranes exhibited superior mechanical and thermal stability due to its (DMF) high hydrogen bonding (dH) values. Thus, the morphological parameters, bulk porosity, and flux performance of MMMs have a significant inter-relationship with the solubility properties of each solvent (i.e., dH, density, volatility, solubility parameter). V C 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 000: 000-000, 2013

[1]  E. Nxumalo,et al.  Solute transport and structural properties of polysulfone/β-cyclodextrin polyurethane mixed-matrix membranes , 2013 .

[2]  N. N. Dutta,et al.  Preparation and characterization of polysulfone–cyclodextrin composite nanofiltration membrane: Solvent effect , 2012 .

[3]  E. Nxumalo,et al.  Preparation and characterization of polysulfone/β-cyclodextrin polyurethane composite nanofiltration membranes , 2012 .

[4]  A. Ahmad,et al.  Preparation and characterization of PVDF/TiO2 mixed matrix membrane via in situ colloidal precipitation method , 2012 .

[5]  V. Starov,et al.  Effect of solvents on performance of polyethersulfone ultrafiltration membranes: Investigation of metal ion separations , 2011 .

[6]  T. Şener,et al.  The effect of different solvents on the performance of zeolite-filled composite pervaporation membranes , 2010 .

[7]  Robert Y. M. Huang,et al.  Composite poly(vinyl alcohol)–poly(sulfone) membranes crosslinked by trimesoyl chloride: Characterization and dehydration of ethylene glycol–water mixtures , 2009 .

[8]  C. Vandecasteele,et al.  Evaluation of self-made nanoporous polyethersulfone membranes, relative to commercial nanofiltration membranes , 2006 .

[9]  Jiding Li,et al.  Preparation, morphologies and properties for flat sheet PPESK ultrafiltration membranes , 2006 .

[10]  L. Szente,et al.  Cyclodextrins as food ingredients , 2004 .

[11]  Ahmad Fauzi Ismail,et al.  Effects of phase inversion and rheological factors on formation of defect-free and ultrathin-skinned asymmetric polysulfone membranes for gas separation , 2003 .

[12]  K. Uekama,et al.  Recent Aspects of Pharmaceutical Application of Cyclodextrins , 2002 .

[13]  J. Villaluenga,et al.  Effects of polymer solvents on the performance of cellulose acetate membranes in methanol/methyl tertiary butyl ether separation , 2001 .

[14]  J. Lai,et al.  Mechanical Properties of Asymmetric Polysulfone Membranes Containing Surfactant as Additives , 2001 .

[15]  H. Ohya,et al.  Hydrophilic membranes for pervaporation : An analytical review , 1997 .

[16]  W. Koros,et al.  A guide to establishing hollow fiber macroscopic properties for membrane applications , 1997 .

[17]  Kang Li,et al.  Relationship between mass ratio of nonsolvent-additive to solvent in membrane casting solution and its coagulation value , 1995 .

[18]  W. Koros,et al.  Aqueous quenched asymmetric polysulfone membranes prepared by dry/wet phase separation , 1993 .

[19]  C. A. Smolders,et al.  Formation of membranes by means of immersion precipitation : Part I. A model to describe mass transfer during immersion precipitation , 1987 .