Thermal Drifts of Capacitive Flow Meters: Analysis of Effects and Model-Based Compensation

Capacitive sensing has become a favorable measurement technology for flow metering in pneumatic conveying systems. Multielectrode sensing structures and tomographic signal evaluations enable spatially resolved flow parameter estimation, which is of particular interest for pneumatically conveyed solids due to inhomogeneous particle distributions within the pipeline. The noninvasive working principle of capacitive sensors is an important feature for the application in industrial processes with harsh environments. However, cross sensitivities of the capacitive probe cause effects, such as temperature drifts of the measurements. For a reliable operation of capacitive flow meters in harsh environments, induced drifts have to be compensated. In this article, we present the detailed analyses of thermal effects within capacitive sensors. Based on the findings, a model-based temperature compensation approach is developed within the Bayesian framework. The performance of the proposed compensation approach is analyzed by a measurement-based validation within a climate chamber and by a simulation-based uncertainty quantification. The capability to obtain temperature-independent estimates with calibration measurements acquired at room temperature is demonstrated.

[1]  M. Neumayer,et al.  Current Reconstruction Algorithms in Electrical Capacitance Tomography , 2011 .

[2]  Tomasz Dyakowski,et al.  Application of electrical capacitance tomography for measurement of gas-solids flow characteristics in a pneumatic conveying system , 2001 .

[3]  Wael A. Altabey.  The thermal effect on electrical capacitance sensor for two-phase flow monitoring , 2016 .

[4]  P. Hansen.  Rank-Deficient and Discrete Ill-Posed Problems: Numerical Aspects of Linear Inversion , 1987 .

[5]  Larry K. Baxter,et al.  Capacitive Sensors: Design and Applications , 1996 .

[6]  Daniel Watzenig,et al.  Reconstruction of inhomogeneities in fluids by means of capacitance tomography , 2003 .

[7]  Shi Liu,et al.  Mass flow measurement of pneumatically conveyed solids using electrical capacitance tomography , 2008 .

[8]  Cedric Briens,et al.  New Calibration Methods for Accurate Electrical Capacitance Tomography Measurements in Particulate-Fluid Systems , 2009 .

[9]  Albert Tarantola,et al.  Inverse problem theory - and methods for model parameter estimation , 2004 .

[10]  T. Bretterklieber,et al.  Field sensor analysis for electrical impedance spectroscopy based ice detection , 2017, 2017 IEEE SENSORS.

[11]  C. Jean-Mistral,et al.  Impact of the nature of the compliant electrodes on the dielectric constant of acrylic and silicone electroactive polymers , 2012 .

[12]  T. Bretterklieber,et al.  Model Based Compensation of Thermal Drifts for Multi Electrode Capacitive Sensing , 2020, 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

[13]  L. S. Leung,et al.  Pneumatic Conveying of Solids: A Theoretical and Practical Approach , 1993 .

[14]  Christopher E. Brennen,et al.  Fundamentals of Multiphase Flow , 2005 .

[15]  Shien Hui,et al.  A novel capacitive system for the concentration measurement of pneumatically conveyed pulverized fuel at power stations , 2006 .

[16]  Wuqiang Yang,et al.  Calibration of capacitance tomography systems: a new method for setting system measurement range , 1996 .

[17]  Daniel Watzenig,et al.  A review of statistical modelling and inference for electrical capacitance tomography , 2009 .

[18]  Thomas Bretterklieber,et al.  Prior design for tomographic volume fraction estimation in pneumatic conveying systems from capacitive data , 2020, Trans. Inst. Meas. Control.

[19]  Andrew Hunt.  Weighing without Touching: Applying Electrical Capacitance Tomography to Mass Flowrate Measurement in Multiphase Flows , 2014 .

[20]  F. Hermann Uhlmann,et al.  Temperature influence on capacitive sensor structures , 2009 .

[21]  Gao Heming,et al.  Local solid particle velocity measurement based on spatial filter effect of differential capacitance sensor array , 2019, The Journal of Engineering.

[22]  O. Lesaint,et al.  Influence of high levels of water absorption on the resistivity and dielectric permittivity of epoxy composites , 2005 .

[23]  R. McGregor,et al.  Silicone Rubber , 1959 .

[24]  Jiangtao Sun,et al.  Fringe effect of electrical capacitance and resistance tomography sensors , 2013 .

[25]  J. Achenbach.  THE LINEARIZED THEORY OF ELASTICITY , 1973 .

[26]  Georg Brasseur.  Design rules for robust capacitive sensors , 2003, IEEE Trans. Instrum. Meas..

[27]  Huaxiang Wang,et al.  A review on image reconstruction algorithms for electrical capacitance/resistance tomography , 2016 .

[28]  Thomas Bretterklieber,et al.  PCA Based State Reduction for Inverse Problems Using Prior Information , 2017 .

[29]  Hannes Wegleiter,et al.  Development of a displacement current-based sensor for electrical capacitance tomography applications , 2008 .

[30]  Wuqiang Yang,et al.  Electrical Capacitance Tomography — from Design to Applications , 1995 .

[31]  Yong Yan,et al.  Guide to the Flow Measurement of Particulate Solids in Pipelines, Part 1: Fundamentals and Principles , 2001 .

[32]  N. Ali,et al.  DIELECTRIC PROPERTIES OF INDUSTRIAL POLYMER COMPOSITE MATERIALS , 2010 .

[33]  Wuqiang Yang,et al.  Adaptive calibration of a capacitance tomography system for imaging water droplet distribution , 2004 .

[34]  Stuart O. Nelson,et al.  Density-permittivity relationships for powdered and granular materials , 2005, IEEE Transactions on Instrumentation and Measurement.

[35]  Wuqiang Yang,et al.  A high-performance digital system for electrical capacitance tomography , 2011 .

[36]  Anthony E. Armenakas,et al.  Advanced Mechanics of Materials and Applied Elasticity , 2005 .

[37]  Abdullah Hussein,et al.  Dielectric Properties and a.c. Conductivity of Epoxy/Alumina Silicate NGK Composites , 2015 .

[38]  Anastasis C. Polycarpou,et al.  Introduction to the Finite Element Method in Electromagnetics , 2006, Introduction to the Finite Element Method in Electromagnetics.

[39]  Wuqiang Yang,et al.  High-temperature electrical capacitance tomography for gas–solid fluidised beds , 2018, Measurement Science and Technology.

[40]  A. Krivda,et al.  Dielectric spectroscopy of fiber-reinforced epoxy materials , 2004, Proceedings of the 2004 IEEE International Conference on Solid Dielectrics, 2004. ICSD 2004..

[41]  T. Bretterklieber,et al.  Front-end circuit modeling for low-Z capacitance measurement applications , 2016, 2016 IEEE International Instrumentation and Measurement Technology Conference Proceedings.