WO3 films modified with functionalised multi-wall carbon nanotubes: Morphological, compositional and gas response studies

Abstract Active layers for gas sensing applications have been obtained by adding oxygen plasma functionalised multi-walled carbon nanotubes (MWCNTs) to WO3 and using the drop-coating deposition method. Scanning electron micrographs showed that MWCNTs are well dispersed on the WO3 matrix. X-ray photoelectron analysis showed that by adding MWCNTs to the WO3 films the contribution of the doublet related with surface defects to the total W 4f signal increased. This gives evidence that the surface area of WO3 films increases due to the addition of MWCNTs to the film. Two different ratios of MWCNTs in WO3 (1/100 and 1/1000) were considered and the response of these sensors towards toxic gases such as nitrogen dioxide, carbon monoxide and ammonia was compared with that of WO3 and MWCNTs gas sensors. The results indicate that the detection at ambient temperature of these toxic gases using WO3-based gas sensors can be highly improved by dispersing an adequate quantity of MWCNTs into the WO3 matrix. A possible mechanism explaining the behaviour of hybrid sensors is introduced.

[1]  Jose Maria Kenny,et al.  Sensors for sub-ppm NO2 gas detection based on carbon nanotube thin films , 2003 .

[2]  Franco Cacialli,et al.  Work Functions and Surface Functional Groups of Multiwall Carbon Nanotubes , 1999 .

[3]  Hongzheng Chen,et al.  Photoconductivity Study of Modified Carbon Nanotube/Oxotitanium Phthalocyanine Composites , 2002 .

[4]  A. Rinzler,et al.  Fluorination of single-wall carbon nanotubes , 1998 .

[5]  R. Smalley,et al.  Functionalization of carbon nanotubes by electrochemical reduction of aryl diazonium salts: a bucky paper electrode. , 2001, Journal of the American Chemical Society.

[6]  Ian F. Akyildiz,et al.  Wireless sensor networks: a survey , 2002, Comput. Networks.

[7]  S. Tsang,et al.  Ag doped WO3-based powder sensor for the detection of NO gas in air , 2003 .

[8]  Laszlo B. Kish,et al.  Semiconductor gas sensors based on nanostructured tungsten oxide , 2001 .

[9]  G. Molas,et al.  Effects of Oxygen Partial Pressure and Annealing Temperature on the Formation of Sputtered Tungsten Oxide Films , 2002 .

[10]  L. Lozzi,et al.  Core level and valence band investigation of WO3 thin films with synchrotron radiation , 2003 .

[11]  R. Smalley,et al.  Reversible water-solubilization of single-walled carbon nanotubes by polymer wrapping , 2001 .

[12]  Jie Lian,et al.  Plasma deposition of Ultrathin polymer films on carbon nanotubes , 2002 .

[13]  Laszlo B. Kish,et al.  Nanocrystalline tungsten oxide thick-films with high sensitivity to H2S at room temperature , 2001 .

[14]  J. Nagy,et al.  Large scale production of short functionalized carbon nanotubes , 2002 .

[15]  C. Cané,et al.  Structural and dimensional control in micromachined integrated solid state gas sensors , 2000 .

[16]  R. A. McGill,et al.  Nerve agent detection using networks of single-walled carbon nanotubes , 2003 .

[17]  Robert C. Haddon,et al.  Chemically Functionalized Single-Walled Carbon Nanotubes as Ammonia Sensors† , 2004 .

[18]  Michael Grunze,et al.  Surface chemistry of H2S-sensitive tungsten oxide films , 1996 .

[19]  Claes-Göran Granqvist,et al.  Nanomaterials for environmental applications: Novel WO3-based gas sensors made by advanced gas deposition , 2004 .

[20]  C. Bittencourt,et al.  Ag induced modifications on WO3 films studied by AFM, Raman and x-ray photoelectron spectroscopy , 2004 .

[21]  Claes-Göran Granqvist,et al.  Structure engineering of WO3 nanoparticles for porous film applications by advanced reactive gas deposition , 2004 .

[22]  Carles Cané,et al.  Screen-printed nanoparticle tin oxide films for high-yield sensor microsystems , 2003 .

[23]  R. Cheung,et al.  Fluorination of carbon nanotubes in CF4 plasma , 2003 .

[24]  Joan Ramon Morante,et al.  Influence of the catalytic introduction procedure on the nano-SnO2 gas sensor performances , 2001 .

[25]  S. Roth,et al.  Chemical functionalization of single walled carbon nanotubes , 2002 .

[26]  W. Hoenlein,et al.  Electrochemical functionalization of multi-walled carbon nanotubes for solvation and purification , 2002 .

[27]  Eduard Llobet,et al.  Oxygen functionalisation of MWNT and their use as gas sensitive thick-film layers , 2006 .

[28]  M. Schiavello,et al.  X-ray photoelectron spectroscopy study of nonstoichiometric tungsten oxides , 1977 .

[29]  M. Heintze,et al.  Analysis of functional groups on the surface of plasma-treated carbon nanofibers , 2003, Analytical and bioanalytical chemistry.

[30]  Jose Maria Kenny,et al.  Reversible oxidation effects on carbon nanotubes thin films for gas sensing applications , 2003 .

[31]  Hong-Ming Lin,et al.  A novel SnO2 gas sensor doped with carbon nanotubes operating at room temperature , 2004 .

[32]  K. An,et al.  X-ray photoemission spectroscopy study of fluorinated single-walled carbon nanotubes , 2002 .

[33]  Hidemoto Nakagawa,et al.  A room-temperature operated hydrogen leak sensor , 2003 .

[34]  Craig A. Grimes,et al.  Gas sensing characteristics of multi-wall carbon nanotubes , 2001 .

[35]  J W Gardner and P N Bartlett,et al.  Electronic Noses: Principles and Applications , 1999 .

[36]  M. Heintze,et al.  Characterization of the uppermost layer of plasma-treated carbon nanotubes , 2003 .

[37]  K. Horn,et al.  Effects of Barrier Height Inhomogeneity on Core Level Photoemission from Clean and Metal-Covered Semiconductor Surfaces , 1995 .

[38]  Joan Ramon Morante,et al.  NH3 interaction with catalytically modified nano-WO3 powders for gas sensing applications , 2003 .

[39]  Hongjie Dai,et al.  Carbon nanotubes: opportunities and challenges , 2002 .

[40]  A. Mau,et al.  Plasma Activation of Carbon Nanotubes for Chemical Modification , 2001 .

[41]  A. Bard,et al.  Electrochemistry of fullerene films , 1995 .

[42]  Y. Nishioka,et al.  A novel semiconductor NO gas sensor operating at room temperature , 1998 .