Numerical study of a large-scale pulverized coal-fired boiler operation using CFD modeling based on the probability density function method

Abstract The paper presents results of numerical modeling of pulverized coal combustion process in the front wall coal-fired boiler. The developed numerical model of the coal combustion process included particle heating, devolatilization, char combustion, as well as turbulent flow and radiative heat transfer. In gas phase combustion process modeling, the mixture fraction approach with PDF was used. Presented modeling results were carried out using the Open Source CFD code – Code_Saturne, and were used to study the pulverized coal combustion in a 225 MWe power plant unit. The input data and boundary conditions were defined based on the collected data about boiler operating conditions and Rosin-Rammler law was used to calculate coal particle distribution. The behavior of pulverized coal and air flow through the burners, as well as the three-dimensional flue gas path through the combustion chamber, was analyzed. Results in form of velocity, temperature, unburned coal and combustion products distribution were presented to show places inside the boiler with high erosion hazard and place where intensive particle deposition may occur, as well as to show the impact of coal particle diameters on Unburned Carbon (UBC) content. Calculation results confirm proper locations of Over-Fire Air (OFA) nozzles and allowing continuing of combustion process at the furnace outlet using only OFA II and OFA III nozzles set. Based on the obtained results is possible to increase the understanding and conduction detailed investigation of boiler operation. The results have been validated with data collected from the power station measurement system and were analyzed in order to find an answer for operational questions regarding optimization of combustion characteristics.

[1]  Hao Zhou,et al.  Computational intelligence approach for NOx emissions minimization in a coal-fired utility boiler , 2010 .

[2]  N. Modliński.  Numerical simulation of SNCR (selective non-catalytic reduction) process in coal fired grate boiler , 2015 .

[3]  Goran Stupar,et al.  Assessing the impact of primary measures for NOx reduction on the thermal power plant steam boiler , 2015 .

[4]  Simeon N. Oka,et al.  Three-dimensional modeling of utility boiler pulverized coal tangentially fired furnace , 2006 .

[5]  C. Ghenai,et al.  CFD analysis of the effects of co-firing biomass with coal , 2010 .

[6]  Ho Young Park,et al.  Combustion and heat transfer characteristics of oxy-coal combustion in a 100 MWe front-wall-fired furnace , 2013 .

[7]  Dawid Taler,et al.  Numerical model of a steam superheater with a complex shape of the tube cross section using Control Volume based Finite Element Method , 2016 .

[8]  P. Coelho.  Assessment of a presumed joint pdf for the simulation of turbulence–radiation interaction in turbulent reactive flows , 2012 .

[9]  Olivier Juan,et al.  Using a genetic algorithm and CFD to identify low NOx configurations in an industrial boiler , 2015 .

[10]  F. Archambeau,et al.  Code Saturne: A Finite Volume Code for the computation of turbulent incompressible flows - Industrial Applications , 2004 .

[11]  C. Yin,et al.  New Fuel Air Control Strategy for Reducing NOx Emissions from Corner-Fired Utility Boilers at Medium–Low Loads , 2017 .

[12]  S. Pope.  The probability approach to the modelling of turbulent reacting flows , 1976 .

[13]  Audai Hussein Al-Abbas,et al.  Numerical simulation of brown coal combustion in a 550 MW tangentially-fired furnace under different operating conditions , 2013 .

[14]  Jamal Naser,et al.  CFD modelling of co-firing of biomass with coal under oxy-fuel combustion in a large scale power plant , 2015 .

[15]  C. Ghenai,et al.  Thermal Performance of Biomass-Fired Steam Power Plant , 2017 .

[16]  A. A. Bhuiyan,et al.  Modelling of slag deposition and flow characteristics of coal combustion under oxy-firing condition in a 550 MW tangentially fired furnace , 2016 .

[17]  P. Madejski,et al.  Online Monitoring System of Air Distribution in Pulverized Coal-Fired Boiler Based on Numerical Modeling , 2017 .

[18]  Zhengqi Li,et al.  Combustion characteristics and NOx formation of a retrofitted low-volatile coal-fired 330 MW utility boiler under various loads with deep-air-staging , 2017 .

[19]  Paweł Madejski,et al.  A Combustion Process Optimization and Numerical Analysis for the Low Emission Operation of Pulverized Coal-Fired Boiler , 2016 .

[20]  Ping Sun,et al.  Computational modeling of pulverized coal combustion processes in tangentially fired furnaces , 2001 .

[21]  Dawid Taler,et al.  Optimization of the boiler start-up taking into account thermal stresses , 2015 .

[22]  Tomasz Janda,et al.  A validation of computational fluid dynamics temperature distribution prediction in a pulverized coal boiler with acoustic temperature measurement , 2015 .

[23]  Arnaldo Martín Martínez Reyes,et al.  CFD modeling of combustion of sugarcane bagasse in an industrial boiler , 2017 .

[24]  Yoshinori Itaya,et al.  Prediction of ignition behavior in a tangentially fired pulverized coal boiler using CFD , 2008 .

[25]  T. Poinsot,et al.  Theoretical and numerical combustion , 2001 .

[26]  Jing Wang,et al.  Numerical simulation and cold experimental research of a low-NOx combustion technology for pulverized low-volatile coal , 2017 .

[28]  Monica Carvalho,et al.  Modeling of a front wall fired utility boiler for different operating conditions , 2001 .

[29]  J. Badur,et al.  An approach for estimation of water wall degradation within pulverized-coal boilers , 2015 .