MDM-PCCT: Multiple Dynamic Modulations for High-Performance Spectral PCCT Imaging

Photon counting computed tomography (PCCT) has the ability to identify individual photons, resulting in quantitative material identification. Meanwhile, several technical challenges still exist in current PCCT imaging systems, including increased noise and suboptimal bin selection. These nonideal effects can substantially degrade the reconstruction performance and material estimation accuracy. To address these issues, in this work, we present a novel system for high-performance spectral PCCT imaging, which is a combination of multiple dynamic modulations, interpolation-based measurements processing strategy and advanced reconstruction method. For simplicity, this new PCCT imaging system is referred to as “MDM-PCCT”. Specifically, the multiple dynamic modulations consist of dynamic kVp modulation, dynamic spectrum modulation and dynamic energy threshold modulation. In the dynamic kVp modulation, three kVp values, i.e., 80, 110 and 140, are included, and the tube voltage waveform follows a sinusoidal curve which is more practical than the rectangular curve in the fast kV switching mode. In the dynamic spectrum modulation, the X-ray spectra are processed by selective spatial-spectral filters to balance the X-ray fluxes and increase the spectral separation. In the dynamic energy threshold modulation, the energy threshold is adaptively changed to determine the optimal bin selection. Furthermore, we propose an energy threshold determination method and interpolation-based measurements processing strategy to address the issue of non-uniform and sparse-view PCCT measurements, respectively. In addition, by considering the intrinsic characteristics of the MDM-PCCT images, we utilize an enhanced total variation regularized model for images reconstruction. Finally, numerical and preclinical studies demonstrate that the presented MDM-PCCT imaging system is capable of yielding uniform and high-fidelity PCCT measurements with noise consistency, and the presented reconstruction method further improves the image quality and material decomposition accuracy.

[1]  Shuai Leng,et al.  Photon-counting Detector CT: System Design and Clinical Applications of an Emerging Technology. , 2019, Radiographics : a review publication of the Radiological Society of North America, Inc.

[2]  K. Taguchi,et al.  Vision 20/20: Single photon counting x-ray detectors in medical imaging. , 2013, Medical physics.

[3]  C. McCollough,et al.  Dual-source photon counting detector CT with a tin filter: a phantom study on iodine quantification performance , 2019, Physics in medicine and biology.

[4]  Dan Xu,et al.  Dual energy CT via fast kVp switching spectrum estimation , 2009, Medical Imaging.

[5]  C. McCollough,et al.  Improved dual-energy material discrimination for dual-source CT by means of additional spectral filtration. , 2009, Medical physics.

[6]  Jeffrey A. Fessler,et al.  Multi-Material Decomposition Using Statistical Image Reconstruction for Spectral CT , 2014, IEEE Transactions on Medical Imaging.

[7]  M. Drangova,et al.  Implementation of dual- and triple-energy cone-beam micro-CT for postreconstruction material decomposition. , 2008, Medical physics.

[8]  Sascha Manuel Huck,et al.  Technical Note: Sheet-based dynamic beam attenuator - A novel concept for dynamic fluence field modulation in x-ray CT. , 2019, Medical physics.

[9]  Zhicong Yu,et al.  Spectral prior image constrained compressed sensing (spectral PICCS) for photon-counting computed tomography , 2016, Physics in medicine and biology.

[10]  A. Sisniega,et al.  Technical Note: spektr 3.0—A computational tool for x-ray spectrum modeling and analysis , 2016, Medical physics.

[11]  Yuxiang Xing,et al.  Multienergy CT acquisition and reconstruction with a stepped tube potential scan. , 2014, Medical physics.

[12]  P. Joseph,et al.  Noise considerations in dual energy CT scanning. , 1979, Medical physics.

[13]  Norbert J. Pelc,et al.  Sufficient Statistics as a Generalization of Binning in Spectral X-ray Imaging , 2011, IEEE Transactions on Medical Imaging.

[14]  M. Viergever,et al.  A Dual-layer Detector for Simultaneous Fluoroscopic and Nuclear Imaging. , 2019, Radiology.

[15]  Shuai Leng,et al.  Dual-source multi-energy CT with triple or quadruple x-ray beams , 2016, SPIE Medical Imaging.

[16]  Jing Huang,et al.  Spectral CT Image Restoration via an Average Image-Induced Nonlocal Means Filter , 2016, IEEE Transactions on Biomedical Engineering.

[17]  Ehsan Samei,et al.  Model-based CT performance assessment and optimization for iodinated and noniodinated imaging tasks as a function of kVp and body size. , 2014, Medical physics.

[18]  J. Schlomka,et al.  Experimental feasibility of multi-energy photon-counting K-edge imaging in pre-clinical computed tomography , 2008, Physics in medicine and biology.

[19]  C. Schulze-Briese,et al.  Transforming X-ray detection with hybrid photon counting detectors , 2019, Philosophical Transactions of the Royal Society A.

[20]  Ge Wang,et al.  A Reconfigurable energy-resolving method for a layered edge-on detector , 2019, Physics in medicine and biology.

[21]  P. Shikhaliev,et al.  Photon counting CT: Effects of dynamic beam attenuator on image quality , 2017 .

[22]  W. Segars,et al.  4D XCAT phantom for multimodality imaging research. , 2010, Medical physics.

[23]  T. Yoshizumi.  Dual Energy CT in Clinical Practice. , 2011, Medical physics.

[24]  C. Mistretta,et al.  Noise reduction in spectral CT: reducing dose and breaking the trade-off between image noise and energy bin selection. , 2011, Medical physics.

[25]  Matthew Tivnan,et al.  Physical modeling and performance of spatial-spectral filters for CT material decomposition , 2019, Medical Imaging.

[26]  J. H. Hubbell,et al.  Tables of X-Ray Mass Attenuation Coefficients and Mass Energy-Absorption Coefficients 1 keV to 20 MeV for Elements Z = 1 to 92 and 48 Additional Substances of Dosimetric Interest , 1995 .

[27]  Willi A Kalender,et al.  Application- and patient size-dependent optimization of x-ray spectra for CT. , 2009, Medical physics.

[28]  S. Osher,et al.  Multi-energy CT based on a prior rank, intensity and sparsity model (PRISM) , 2011, Inverse problems.

[29]  Zhaoying Bian,et al.  A Simple Low-Dose X-Ray CT Simulation From High-Dose Scan , 2015, IEEE Transactions on Nuclear Science.

[30]  Shuai Leng,et al.  Estimation of signal and noise for a whole-body research photon-counting CT system , 2017, Journal of medical imaging.

[31]  Liang Li,et al.  Dynamic-dual-energy spectral CT for improving multi-material decomposition in image-domain , 2019, Physics in medicine and biology.

[32]  Alan C. Bovik,et al.  Image information and visual quality , 2004, 2004 IEEE International Conference on Acoustics, Speech, and Signal Processing.

[33]  Lei Zhu,et al.  Single-Scan Dual-Energy CT Using Primary Modulation , 2018, IEEE Transactions on Medical Imaging.

[34]  Sui Li,et al.  Contrast-medium anisotropy-aware tensor total variation model for robust cerebral perfusion CT reconstruction with weak radiation: a preliminary study , 2019, 15th International Meeting on Fully Three-Dimensional Image Reconstruction in Radiology and Nuclear Medicine.

[35]  Borut Marincek,et al.  Characterization of Urinary Stones With Dual-Energy CT: Improved Differentiation Using a Tin Filter , 2010, Investigative radiology.

[36]  Steven Tilley,et al.  Model-based Multi-material Decomposition using Spatial-Spectral CT Filters. , 2018, Conference proceedings. International Conference on Image Formation in X-Ray Computed Tomography.

[37]  K. Taguchi,et al.  Material separation in x-ray CT with energy resolved photon-counting detectors. , 2011, Medical physics.

[38]  N. Pelc,et al.  Fluid‐filled dynamic bowtie filter: Description and comparison with other modulators , 2018, Medical physics.

[39]  S. Nik,et al.  Optimal material discrimination using spectral x-ray imaging. , 2011, Physics in medicine and biology.

[40]  Shuai Leng,et al.  Dual-energy dual-source CT with additional spectral filtration can improve the differentiation of non-uric acid renal stones: an ex vivo phantom study. , 2011, AJR. American journal of roentgenology.

[41]  Cheng Xu,et al.  Performance characterization of a silicon strip detector for spectral computed tomography utilizing a laser testing system , 2011, Medical Imaging.

[42]  T. Flohr,et al.  Spectral Computed Tomography , 2012 .