Sequence of Rubbing-Induced Molecular Segmental Reorientations in the Nanoscale Film Surface of a Brush Polymer Rod.

Poly(p-phenylene-3,6-bis(4-(n-butoxy)phenyloxy)pyromellitimide) (C4-PMDA-PDA PI), a well-defined model brush polymer composed of a rodlike polymer backbone with two bristles per repeat unit, was the first reported polyimide to align liquid crystals perpendicular to the rubbing direction at the rubbed film surface. In the present study, we used polarized infrared (IR) spectroscopy and 2D correlation analyses of the resulting IR spectra to study nanoscale films of C4-PMDA-PDA PI rubbed at various rubbing densities. The results of these studies allowed us to establish the nature and sequence of the rubbing-induced segmental reorientations that occur in the polymer molecules at the film surface. The rubbing process was found to reorient the fully rodlike polymer backbones and the n-butyl bristle end groups such that they lay parallel to the rubbing direction. In contrast, rubbing caused the phenyloxy bristle units to reorient to a direction perpendicular to the rubbing direction. These reorientations of the polymer's main chain and bristles became more pronounced with increasing rubbing density, and the rubbing process had a greater effect on the polymer's main chains than on the bristles. The rubbing-induced reorientations of the polymer segments were found to follow the sequence PDA (phenyl ring), imide ring, phenyloxy unit, imide C-N bond, and n-butyl group. It was additionally evident that the rubbing process reorients the imide rings biaxially, that is, both along the rubbing direction and out of the plane. This biaxial reorientation was found to be accompanied by a biaxial reorientation of the bristles chemically bonded to the PMDA unit that includes the imide rings. In particular, increasing the rubbing density enhanced the out-of-plane reorientation of the imide rings. In contrast, no rubbing-induced inclination of the reoriented imide rings (i.e., the polymer's main chains) was detected.

[1]  Seung-Woo Lee,et al.  Photoreaction and molecular reorientation in a nanoscaled film of poly(methyl 4-(methacryloyloxy)cinnamate) studied by two-dimensional FTIR and UV correlation spectroscopy , 2003 .

[2]  J. Jung,et al.  Surface Morphology, Molecular Reorientation, and Liquid Crystal Alignment Properties of Rubbed Nanofilms of a Well-Defined Brush Polyimide with a Fully Rodlike Backbone , 2002 .

[3]  H. Shin,et al.  Characterization of Transition Temperatures of a Langmuir—Blodgett Film of Poly(tert-butyl Methacrylate) by Two-Dimensional Correlation Spectroscopy and Principal Component Analysis , 2002 .

[4]  H. Shin,et al.  Glass Transition Temperature and Conformational Changes of Poly(methyl methacrylate) Thin Films Determined by a Two-Dimensional Map Representation of Temperature-Dependent Reflection−Absorption FTIR Spectra , 2002 .

[5]  T. Shin,et al.  Time-resolved synchrotron X-ray diffraction and infrared spectroscopic studies of imidization and structural evolution in a microscaled film of PMDA-3,4'-ODA poly(amic acid) , 2001 .

[6]  Y. Shen,et al.  Rubbing-induced molecular reorientation on an alignment surface of an aromatic polyimide containing cyanobiphenyl side chains. , 2001, Journal of the American Chemical Society.

[7]  M. Ree,et al.  Novel polypyromellitimides and their liquid crystal aligning properties , 2001 .

[8]  S. I. Kim,et al.  Fully Rodlike Polyimides Containing Flexible Side Chains with Various Lengths and Their Ability to Align Liquid-Crystals on the Rubbed Surface , 2000 .

[9]  S. I. Kim,et al.  Liquid-Crystal Alignment on the Rubbed Film Surface of Semi-Flexible Copolyimides Containing n-Alkyl Side Groups , 2000 .

[10]  M. Oh-e,et al.  Polar ordering at an interface between a liquid crystal monolayer and a rubbed polyimide , 2000 .

[11]  A. E. Dowrey,et al.  Generalized Two-Dimensional Correlation Spectroscopy , 2000 .

[12]  C. Rosenblatt,et al.  History-dependent orientational order of rubbed polyimide for liquid-crystal alignment , 1999 .

[13]  S. I. Kim,et al.  Synthesis of new aromatic polyimides with various side chains containing a biphenyl mesogen unit and their abilities to control liquid‐crystal alignments on the rubbed surface , 1999 .

[14]  W. S. Li,et al.  FT-IR Study of the Imidization Process of Photosensitive Polyimide PMDA/ODA , 1998 .

[15]  S. I. Kim,et al.  Alignment of Liquid-Crystals on Rubbed Polyimide Films Prepared from Various Precursor Polymers , 1998 .

[16]  D. Allara,et al.  Formation of A Molecularly Reconstructed Surface Layer during Unidirectional Rubbing of Polyimide Films , 1998 .

[17]  J. Jung,et al.  Synthesis and characterization of polyimides from 1,4-bis[4-(n-alkyloxy)phenyloxy]pyromellitic dianhydrides and 4,4'-oxydianiline , 1998 .

[18]  T. Buffeteau,et al.  Photoinduced Orientation in Azopolymers Studied by Infrared Spectroscopy: Cooperative and Biaxial Orientation in Semicrystalline Polymers , 1998 .

[19]  Joachim Stöhr,et al.  Microscopic Origin of Liquid Crystal Alignment on Rubbed Polymer Surfaces , 1998 .

[20]  N. V. Madhusudana,et al.  Effect of surface electric field on the anchoring of nematic liquid crystals , 1998 .

[21]  Kang-Wook Lee,et al.  Microscopic Molecular Reorientation of Alignment Layer Polymer Surfaces Induced by Rubbing and Its Effects on LC Pretilt Angles , 1996 .

[22]  G. P. Bryan-Brown,et al.  Atomic force microscopy studies of rubbed polyimide surfaces used for liquid crystal alignment , 1996 .

[23]  J. A. Logan,et al.  Near-surface alignment of polymers in rubbed films , 1995, Nature.

[24]  R. Hasegawa,et al.  Analysis of Rubbed Polyimide Films by Polarized Infrared Spectroscopy: Effects of Immersion in Organic Solvents , 1995 .

[25]  Lavrentovich,et al.  Anchoring transition in a nematic liquid crystal composed of centrosymmetric molecules. , 1994, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[26]  Shen,et al.  Correlation between surface and bulk orientations of liquid crystals on rubbed polymer surfaces: Odd-even effects of polymer spacer units. , 1993, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[27]  I. Noda.  Generalized Two-Dimensional Correlation Method Applicable to Infrared, Raman, and other Types of Spectroscopy , 1993 .

[28]  Tatsuo Uchida,et al.  Relationship between Rubbing Strength and Surface Anchoring of Nematic Liquid Crystal , 1992 .

[29]  Christine Boeffel,et al.  Photoinduced reorientation in liquid‐crystalline polymers below the glass transition temperature studied by time‐dependent infrared spectroscopy , 1991 .

[30]  Shen,et al.  Investigation of surface-induced alignment of liquid-crystal molecules by optical second-harmonic generation. , 1991, Physical review. A, Atomic, molecular, and optical physics.

[31]  G. Durand.  Order electricity in liquid crystals , 1990 .

[32]  Kazuo Nakayama,et al.  Infrared dichroism and visible-ultraviolet dichroism studies on roller-drawn polypropylene and polyethylene sheets , 1987 .

[33]  N. E. Schlotter,et al.  Anisotropic orientation in molecular monolayers by infrared spectroscopy , 1983 .

[34]  W. Meyer,et al.  Photoproduction of neutral pions at backward angles in the resonance region and the η-cusp , 1979 .

[35]  K. Miyano,et al.  Wall-induced pretransitional birefringence: A new tool to study boundary aligning forces in liquid crystals , 1979 .

[36]  D. C. Shaver,et al.  Alignment of liquid crystals using submicrometer periodicity gratings , 1978 .

[37]  D. W. Berreman,et al.  Solid Surface Shape and the Alignment of an Adjacent Nematic Liquid Crystal , 1972 .

[38]  Peter J. Collings,et al.  Handbook Of Liquid Crystal Research , 1997 .

[39]  M. E. Becker,et al.  Alignment Properties of Rubbed Polymer Surfaces , 1986 .

[40]  Joseph A. Castellano,et al.  Surface Anchoring of Liquid Crystal Molecules on Various Substrates , 1983 .

[41]  D. W. Berreman,et al.  Alignment of Liquid Crystals by Grooved Surfaces , 1973 .