Reaction behavior of LiFePO4 as a cathode material for rechargeable lithium batteries

Abstract We investigated the effect of cell temperature on the electrochemical reaction behavior of LiFePO4. We evaluated its electrochemical characteristics by using cyclic voltammetry and electrochemical impedance spectroscopy (EIS). Both the electron transfer activity and the lithium ion diffusion rate in the LiFePO4 electrode increased as we increased the operating temperature. The apparent activation energy for the lithium diffusion was more than twice that for charge transfer. This result supports the idea that the large discharge capacity of LiFePO4 at elevated temperatures is mainly caused by the high lithium diffusion rate in the LiFePO4 particles, which makes it possible to utilize more material near the center of the particles. We also evaluated the thermal stability of LiFePO4 by differential scanning calorimetry (DSC). Charged LiFePO4 in contact with an electrolyte solution exhibited no obvious endothermic or exothermic reaction below 340 °C. This means that LiFePO4 has higher thermal stability than such other cathode materials as LiCoO2, LiNiO2 and LiMn2O4.

[1]  V. Manivannan,et al.  Tuning the Position of the Redox Couples in Materials with NASICON Structure by Anionic Substitution , 1998 .

[2]  John O. Thomas,et al.  Lithium extraction/insertion in LiFePO4: an X-ray diffraction and Mossbauer spectroscopy study , 2000 .

[3]  Q. Feng,et al.  Kinetic Properties of a Pt / Lambda ‐ MnO2 Electrode for the Electroinsertion of Lithium Ions in an Aqueous Phase , 1995 .

[4]  Ralph E. White,et al.  Modeling Lithium Intercalation of a Single Spinel Particle under Potentiodynamic Control , 2000 .

[5]  Petr Novák,et al.  Insertion Electrode Materials for Rechargeable Lithium Batteries , 1998 .

[6]  John B. Goodenough,et al.  Mapping of Transition Metal Redox Energies in Phosphates with NASICON Structure by Lithium Intercalation , 1997 .

[7]  Minoru Inaba,et al.  Impedance Study on the Electrochemical Lithium Intercalation into Natural Graphite Powder , 1998 .

[8]  J. Ross Macdonald,et al.  Note on the parameterization of the constant-phase admittance element , 1984 .

[9]  R. Greef,et al.  Instrumental Methods in Electrochemistry , 2002 .

[10]  K. S. Nanjundaswamy,et al.  Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries , 1997 .

[11]  S. Surampudi,et al.  Electrochemical Impedance Spectroscopy of Lithium‐Titanium Disulfide Rechargeable Cells , 1993 .

[12]  John B. Goodenough,et al.  Effect of Structure on the Fe3 + / Fe2 + Redox Couple in Iron Phosphates , 1997 .

[13]  M. Yoshio,et al.  Studies on an LiMnO spinel system (obtained by melt-impregnation) as a cathode for 4 V lithium batteries part 1. Synthesis and electrochemical behaviour of LixMn2O4 , 1995 .

[14]  John B. Goodenough,et al.  Lithium insertion into Fe2(SO4)3 frameworks , 1989 .