Ultra-efficient, 10-watt-level mid-infrared supercontinuum generation in fluoroindate fiber.

A 10-watt-level mid-infrared supercontinuum (SC) spanning 0.8-4.7 μm with ultra-high-power conversion efficiency is generated in a piece of fluoroindate (InF3) fiber. The pump laser is a master oscillator power amplifier system seeded by a mode-locked fiber laser operating at 1956 nm with pulse repetition rate and pulse duration of 33 MHz and 60 ps, respectively. A piece of InF3 fiber is fusion spliced to the output end of the pump light source with a low fusion splicing loss of 0.12 dB. An endcap made of multimode aluminum fluoride fiber is used to protect the fiber tip from possible optical or thermal damage. Benefiting from the fiber endcap as well as the low-loss splicing joint between silica and InF3 fiber, high-power SC generation is achieved with maximal output power of 11.3 W. Furthermore, the long wavelength edge of the obtained SC spectrum is extended to 4.7 μm. This Letter, to the best of our knowledge, not only demonstrates the first 10-watt-level SC generation in InF3 fibers, but also achieves record power conversion efficiency of 66.5% among reported 10-watt-level fluoride-fiber-based SC laser sources.

[1]  J. Hou,et al.  All-fiberized, multi-watt 2-5-μm supercontinuum laser source based on fluoroindate fiber with record conversion efficiency. , 2018, Optics letters.

[2]  Lei Zhang,et al.  High-power mid-infrared supercontinuum laser source using fluorotellurite fiber , 2018, Optica.

[3]  T. Mikkonen,et al.  Broadband cantilever-enhanced photoacoustic spectroscopy in the mid-IR using a supercontinuum. , 2018, Optics letters.

[4]  Solenn Cozic,et al.  Watt-level and spectrally flat mid-infrared supercontinuum in fluoroindate fibers , 2018 .

[5]  Réal Vallée,et al.  Mid-infrared supercontinuum generation in fluoride fiber amplifiers: current status and future perspectives , 2018, Applied Physics B.

[6]  M. Harasek,et al.  Enhanced mid-infrared multi-bounce ATR spectroscopy for online detection of hydrogen peroxide using a supercontinuum laser. , 2018, Optics express.

[7]  Paul Dumas,et al.  Supercontinuum-based Fourier transform infrared spectromicroscopy , 2018 .

[8]  Yongmin Jung,et al.  295-kW peak power picosecond pulses from a thulium-doped-fiber MOPA and the generation of watt-level >2.5-octave supercontinuum extending up to 5 μm. , 2018, Optics express.

[9]  Ole Bang,et al.  Mid-infrared multispectral tissue imaging using a chalcogenide fiber supercontinuum source. , 2018, Optics letters.

[10]  P. Hlubina,et al.  Mid-infrared supercontinuum generation in a fluoroindate fiber with 1.4 W time-averaged power , 2018 .

[11]  Ke Yin,et al.  15.2  W spectrally flat all-fiber supercontinuum laser source with >1  W power beyond 3.8  μm. , 2017, Optics letters.

[12]  S. Ruan,et al.  Scaling all-fiber mid-infrared supercontinuum up to 10 W-level based on thermal-spliced silica fiber and ZBLAN fiber , 2016 .

[13]  Samuel Poulain,et al.  Mid-IR supercontinuum from 2.4 to 5.4 μm in a low-loss fluoroindate fiber. , 2016, Optics letters.

[14]  Ke Yin,et al.  Highly stable, monolithic, single-mode mid-infrared supercontinuum source based on low-loss fusion spliced silica and fluoride fibers. , 2016, Optics letters.

[15]  Pu Wang,et al.  High power mid-infrared supercontinuum generation in a single-mode ZBLAN fiber with up to 21.8 W average output power. , 2014, Optics express.

[16]  J. Świderski.  High-power mid-infrared supercontinuum sources: Current status and future perspectives , 2014 .

[17]  Ke Yin,et al.  Thirteen watt all-fiber mid-infrared supercontinuum generation in a single mode ZBLAN fiber pumped by a 2 μm MOPA system. , 2014, Optics letters.

[18]  M.N. Islam,et al.  10.5 W Time-Averaged Power Mid-IR Supercontinuum Generation Extending Beyond 4 $\mu$m With Direct Pulse Pattern Modulation , 2009, IEEE Journal of Selected Topics in Quantum Electronics.

[19]  Jacek Swiderski,et al.  High average power supercontinuum generation in a fluoroindate fiber , 2013 .