The NETL MFiX Suite of multiphase flow models: A brief review and recent applications of MFiX-TFM to fossil energy Technologies

The MFiX suite of multiphase computational fluid dynamics (CFD) codes is being developed at U.S. Department of Energy's National Energy Technology Laboratory (NETL). It includes several different approaches to multiphase simulation: MFiX-TFM, a two-fluid (Eulerian–Eulerian) model; MFiX-DEM, an Eulerian fluid model with a Lagrangian Discrete Element Model for the solids phase; and MFiX-PIC, Eulerian fluid model with Lagrangian particle ‘parcels’ representing particle groups. These models are undergoing continuous development and application, with verification, validation, and uncertainty quantification (VV&UQ) as integrated activities. After a brief summary of recent progress in the verification, validation and uncertainty quantification (VV&UQ), this article highlights two recent accomplishments in the application of MFiX-TFM to fossil energy technology development. First, recent application of MFiX to the pilot-scale KBR TRIG™ Transport Gasifier located at DOE's National Carbon Capture Center (NCCC) is described. Gasifier performance over a range of operating conditions was modeled and compared to NCCC operational data to validate the ability of the model to predict parametric behavior. Second, comparison of code predictions at a detailed fundamental scale is presented studying solid sorbents for the post-combustion capture of CO2 from flue gas. Specifically designed NETL experiments are being used to validate hydrodynamics and chemical kinetics for the sorbent-based carbon capture process.

[1]  Dimitri Gidaspow,et al.  Fluidization in Two-Dimensional Beds with a Jet. 2. Hydrodynamic Modeling , 1983 .

[2]  Olivier Simonin,et al.  A functional subgrid drift velocity model for filtered drag prediction in dense fluidized bed , 2012 .

[3]  Sankaran Sundaresan,et al.  Verification of filtered two‐fluid models for gas‐particle flows in risers , 2011 .

[4]  Tingwen Li,et al.  Validation of a 2.5D CFD model for cylindrical gas–solids fluidized beds , 2015 .

[5]  Kapil Agrawal,et al.  Filtered models for scalar transport in gas–particle flows , 2013 .

[6]  Madhava Syamlal,et al.  Validation and Uncertainty Quantification of a Multiphase Computational Fluid Dynamics Model , 2013 .

[7]  S. Sjostrom,et al.  Investigation of Porous Silica Supported Mixed-Amine Sorbents for Post-Combustion CO2 Capture , 2012 .

[8]  Chris Guenther,et al.  Improvement in Precision, Accuracy, and Efficiency in Standardizing the Characterization of Granular Materials , 2013 .

[9]  Jordan Musser,et al.  A 2.5D Computational Method to Simulate Cylindrical Fluidized Beds , 2015 .

[10]  Curtis B. Storlie,et al.  Hierarchical calibration and validation of computational fluid dynamics models for solid sorbent-based carbon capture , 2016 .

[11]  Xin Sun,et al.  Carbon Capture Simulation Initiative: a case study in multiscale modeling and new challenges. , 2014, Annual review of chemical and biomolecular engineering.

[12]  J. Mačák,et al.  Mathematical Model for the Gasification of Coal under Pressure , 1978 .

[13]  Ting-shuai Li,et al.  Computational Fluid Dynamic Simulations of a Pilot-Scale Transport Coal Gasifier: Evaluation of Reaction Kinetics , 2013 .

[14]  Arthur T. Andrews,et al.  Filtered two‐fluid models for fluidized gas‐particle suspensions , 2008 .

[15]  Christopher J. Roy,et al.  A comprehensive framework for verification, validation, and uncertainty quantification in scientific computing , 2011 .

[16]  Sreekanth Pannala,et al.  Validation Studies on Filtered Model Equations for Gas-Particle Flows in Risers , 2012 .

[17]  A. Gómez-Barea,et al.  Modeling of biomass gasification in fluidized bed , 2010 .

[18]  Manish Bhargava,et al.  KBR'S TRANSPORT GASIFIER (TRIG™) - AN ADVANCED GASIFICATION TECHNOLOGY FOR SNG PRODUCTION FROM LOW-RANK COALS , 2008 .

[19]  Stefan Pirker,et al.  Comparative analysis of subgrid drag modifications for dense gas‐particle flows in bubbling fluidized beds , 2013 .

[20]  Bret H. Howard,et al.  Comprehensive Study of the Impact of Steam on Polyethyleneimine on Silica for CO2 Capture , 2013 .

[21]  Aytekin Gel,et al.  Applying uncertainty quantification to multiphase flow computational fluid dynamics , 2013 .

[22]  Madhava Syamlal,et al.  METC Gasifier Advanced Simulation (MGAS) model , 1992 .

[23]  Madhava Syamlal,et al.  Challenge problem: 1. Model validation of circulating fluidized beds , 2014 .

[24]  Andrew Lee,et al.  A model for the adsorption kinetics of CO2 on amine-impregnated mesoporous sorbents in the presence of water , 2011 .

[25]  S. Pannala,et al.  Open-source MFIX-DEM software for gas-solids flows: Part I – verification studies , 2012 .

[26]  C. Westbrook,et al.  Simplified Reaction Mechanisms for the Oxidation of Hydrocarbon Fuels in Flames , 1981 .

[27]  Kapil Agrawal,et al.  Filtered two‐fluid models of fluidized gas‐particle flows: New constitutive relations , 2013 .

[28]  Aytekin Gel,et al.  The Effect of Grid Resolution and Reaction Models in Simulation of a Fluidized Bed Gasifier Through Nonintrusive Uncertainty Quantification Techniques , 2016 .

[29]  Sankaran Sundaresan,et al.  Constitutive Models for Filtered Two-Fluid Models of Fluidized Gas–Particle Flows , 2011 .

[30]  Terry Jordan,et al.  Advanced Chemistry Surrogate Model Development within C3M for CFD Modeling, Part 1: Methodology Development for Coal Pyrolysis , 2014 .

[31]  Christopher W. Jones,et al.  Amine-tethered solid adsorbents coupling high adsorption capacity and regenerability for CO2 capture from ambient air. , 2011, ChemSusChem.

[32]  Christopher J. Roy,et al.  Code Verification for Multiphase Flows Using the Method of Manufactured Solutions , 2014 .

[33]  Tingwen Li,et al.  MFIX simulation of NETL/PSRI challenge problem of circulating fluidized bed , 2012 .

[34]  Xin Sun,et al.  Filtered sub-grid constitutive models for fluidized gas-particle flows constructed from 3-D simulations , 2016 .

[35]  Holly Krutka,et al.  Evaluation of solid sorbents as a retrofit technology for CO2 capture , 2010 .

[36]  Rahul Garg,et al.  Documentation of open-source MFIX–DEM software for gas-solids flows , 2010 .