A Theoretical Analysis of the Mixed Elastohydrodynamic Lubrication in Elliptical Contacts With an Arbitrary Entrainment Angle

Numerical simulations of the elastohydrodynamic lubrication (EHL) have been conducted by many researchers, in which the entrainment velocity is usually parallel to one of the axes of Hertzian contact ellipse. However, in some engineering applications, such as the counterformal contacts in spiral bevel and hypoid gears, entraining velocity vector may have an oblique angle that could possibly influence the lubrication characteristics significantly. Also, a vast majority of gears operate in mixed EHL mode in which the rough surface asperity contacts and lubricant films coexist. These gears are key elements widely used for transmitting significant power in various types of vehicles and engineering machinery. Therefore, model development for the mixed EHL in elliptical contacts with an arbitrary entrainment angle is of great importance. In the present paper, a recently developed mixed EHL model is modified to consider the effect of arbitrary entraining velocity angle, and the model is validated by comparing its results with available experimental data and previous numerical analyses found in literature. Based on this, numerical simulations are conducted to systematically study the influence of entrainment angle on lubricant film thickness in wide ranges of speed, load, and contact ellipticity. The obtained results cover the entire lubrication spectrum from thick-film and thin-film lubrication all the way down to mixed and boundary lubrication. In addition, minimum film thickness prediction formula is also developed through curve-fitting of the numerical results.

[1]  B. J. Hamrock,et al.  Fast Approach for Calculating Film Thicknesses and Pressures in Elastohydrodynamically Lubricated Contacts at High Loads , 1986 .

[2]  Dong Zhu,et al.  Point Contact EHL Based on Optically Measured Three-Dimensional Rough Surfaces , 1997 .

[3]  Dong Zhu,et al.  A Full Numerical Solution to the Mixed Lubrication in Point Contacts , 2000 .

[4]  Dong Zhu,et al.  Elastohydrodynamic Lubrication: A Gateway to Interfacial Mechanics—Review and Prospect , 2011 .

[5]  Yuanzhong Hu,et al.  Effects of Differential Scheme and Mesh Density on EHL Film Thickness in Point Contacts , 2006 .

[6]  Dong Zhu,et al.  On the λ ratio range of mixed lubrication , 2012 .

[7]  H. P. Evans,et al.  Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method Part 1: Theory and validation , 2003 .

[8]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part II—Ellipticity Parameter Results , 1976 .

[9]  Effect of Surface Roughness on Pressure Spike and Film Constriction in Elastohydrodynamically Lubricated Line Contacts , 1990 .

[10]  J. F. Dunn,et al.  A theoretical analysis of the isothermal elastohydrodynamic lubrication of concentrated contacts. II. General case, with lubricant entrainment along either principal axis of the Hertzian contact ellipse or at some intermediate angle , 1985, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[11]  Y-Z Hu,et al.  A comparative study of the methods for calculation of surface elastic deformation , 2003 .

[12]  K. P. Oh,et al.  Numerical solution of the point contact problem using the finite element method , 1977 .

[13]  H. P. Evans,et al.  Coupled solution of the elastohydrodynamic line contact problem using a differential deflection method , 2000 .

[14]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part IV—Starvation Results , 1976 .

[15]  Jing Wang,et al.  Simplified multigrid technique for the numerical solution to the steady-state and transient EHL line contacts and the arbitrary entrainment EHL point contacts , 2001 .

[16]  R. Gohar,et al.  Oil Film Thickness and Shape for a Ball Sliding in a Grooved Raceway , 1972 .

[17]  S. Wen,et al.  An Inverse Solution to the Point Contact EHL Problem Under Heavy Loads , 1987 .

[18]  D. Zhu,et al.  On some aspects of numerical solutions of thin-film and mixed elastohydrodynamic lubrication , 2007 .

[19]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results , 1976 .

[20]  H. P. Evans,et al.  Inverse Solution of Reynolds’ Equation of Lubrication Under Point-Contact Elastohydrodynamic Conditions , 1981 .

[21]  R. Gohar,et al.  Hydrodynamic Friction in Elliptical and Circular Point Contacts , 1974 .

[22]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part 1—Theoretical Formulation , 1975 .

[23]  Hideaki Okamura,et al.  Paper XI(iii) – A contribution to the numerical analysis of isothermal elastohydrodynamic lubrication , 1993 .

[24]  A. Cameron,et al.  The solution of the point contact elasto-hydrodynamic problem , 1975, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[25]  Karsten Stahl,et al.  Theoretical and Experimental Investigations on EHL Point Contacts with Different Entrainment Velocity Directions , 2013 .