论文信息 - Experimental Investigation on Lateral Performance of Timber-Steel Hybrid Shear Wall Systems

Experimental Investigation on Lateral Performance of Timber-Steel Hybrid Shear Wall Systems

AbstractThis paper presents the results of an experimental study on the lateral performance of timber-steel hybrid shear wall systems. Such systems are composed of steel moment-resisting frames and infill wood-frame shear walls. Monotonic and reversed cyclic tests of two full-scale timber-steel hybrid structures were conducted. There were three timber-steel hybrid shear wall systems in each structure. The lateral stiffness, lateral load capacities and hysteretic characteristics of the timber-steel hybrid shear wall systems with single- and double-sheathed infill wood-frame shear walls were investigated. The load sharing effect between the timber and the steel subsystems was studied. The test results showed that the installation of the infill wood-frame shear wall produced a significant increase in the initial lateral stiffness of the bare steel moment-resisting frame. The infill wood-frame shear walls were very effective in the initial stages of loading and absorbed a substantial part of the lateral load....

[1] B. R Ellis,et al. Dynamic testing and stiffness evaluation of a six-storey timber framed building during construction , 2001 .

[2] Sinan Altin,et al. An experimental study on reinforced concrete partially infilled frames , 2007 .

[3] Amin Mohebkhah,et al. Nonlinear analysis of masonry-infilled steel frames with openings using discrete element method , 2008 .

[4] Alessandro Palermo,et al. Multi-Storey Prestressed Timber Buildings in New Zealand , 2008 .

[5] Ario Ceccotti,et al. New Technologies for Construction of Medium-Rise Buildings in Seismic Regions: The XLAM Case , 2008 .

[6] Stefano Pampanin,et al. Construction time and cost for post-tensioned timber buildings , 2009 .

[7] John W. van de Lindt,et al. Experimental Seismic Response of a Full-Scale Six-Story Light-Frame Wood Building , 2010 .

[8] John W. van de Lindt,et al. Simplified Direct Displacement Design of Six-Story Woodframe Building and Pretest Seismic Performance Assessment , 2010 .

[9] John W. van de Lindt,et al. Shake table testing of a full-scale seven-story steel–wood apartment building , 2011 .

[10] Massimo Fragiacomo,et al. Elastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions , 2011 .

[11] Roberto Tomasi,et al. Ductile moment-resistant steel–timber connections , 2011 .