3D Printing of Damage-tolerant Martian Regolith Simulant-based Geopolymer Composites

[1]  Kefei Zhao,et al.  Effect of FA and GGBFS on compressive strength, rheology, and printing properties of cement-based 3D printing material , 2022, Construction and Building Materials.

[2]  S. Kawashima,et al.  Enhancing carbonation and strength of MgO cement through 3D printing , 2022, Construction and Building Materials.

[3]  Mingzhong Zhang,et al.  3D printing geopolymers: A review , 2022, Cement and Concrete Composites.

[4]  P. Colombo,et al.  Additive Manufacturing of Ceramics from Liquid Feedstocks , 2022, Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers.

[5]  P. Louda,et al.  The Influence of the Material Structure on the Mechanical Properties of Geopolymer Composites Reinforced with Short Fibers Obtained with Additive Technologies , 2022, International journal of molecular sciences.

[6]  Xingyi Zhu,et al.  Preparation and evaluation of geopolymer based on BH-2 lunar regolith simulant under lunar surface temperature and vacuum condition , 2021 .

[7]  Zhihua Yang,et al.  3D-printing of architectured short carbon fiber-geopolymer composite , 2021, Composites Part B: Engineering.

[8]  N. Wagner,et al.  Comparison of lunar and Martian regolith simulant-based geopolymer cements formed by alkali-activation for in-situ resource utilization , 2021, Advances in Space Research.

[9]  Yu Zhou,et al.  Direct ink writing of geopolymer with high spatial resolution and tunable mechanical properties , 2021 .

[10]  P. Colombo,et al.  Additive manufacturing of SiOC scaffolds with tunable structure-performance relationship , 2021, Journal of the European Ceramic Society.

[11]  M. Şahmaran,et al.  Life cycle assessment of construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing , 2022, Cleaner Engineering and Technology.

[12]  T. Alomayri.  Performance evaluation of basalt fiber-reinforced geopolymer composites with various contents of nano CaCO3 , 2021 .

[13]  K. Paine,et al.  A review on applications of sol-gel science in cement , 2021, Construction and Building Materials.

[14]  S. Sani,et al.  The Moon Project: Where Management Meets Mathematics , 2021, Scientific African.

[15]  Ming Xia,et al.  Ambient temperature cured ‘just-add-water’ geopolymer for 3D concrete printing applications , 2021 .

[16]  Xiaoping Qian,et al.  3D printed recoverable honeycomb composites reinforced by continuous carbon fibers , 2021, Composite Structures.

[17]  Elbaz I. Abouelmagd,et al.  Effect of Moon perturbation on the energy curves and equilibrium points in the Sun–Earth–Moon system , 2021 .

[18]  R. Vaish,et al.  Thermoelectric energy harvesting using cement-based composites: a review , 2021 .

[19]  M. Ribeiro,et al.  Role of temperature in 3D printed geopolymers: Evaluating rheology and buildability , 2021 .

[20]  P. Colombo,et al.  Synthesis and additive manufacturing of calcium silicate hydrate scaffolds , 2021 .

[21]  A. J. Babafemi,et al.  Biomimicry for 3D concrete printing: A review and perspective , 2021 .

[22]  P. Schroeder,et al.  Development of martian regolith and bedrock simulants: Potential and limitations of martian regolith as an in-situ resource , 2021 .

[23]  J. Sanjayan,et al.  Effect of Alkali Reactions on the Rheology of One-Part 3D Printable Geopolymer Concrete , 2020, Cement and Concrete Composites.

[24]  J. Sanjayan,et al.  Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing , 2020 .

[25]  D. V. Ribeiro,et al.  3D printed mesh reinforced geopolymer: Notched prism bending , 2020 .

[26]  Jianzhuang Xiao,et al.  Finite element analysis on the anisotropic behavior of 3D printed concrete under compression and flexure , 2020 .

[27]  S. Rossignol,et al.  Shaping of geopolymer composites by 3D printing , 2020 .

[28]  Zhihua Yang,et al.  3D printing geopolymer nanocomposites: Graphene oxide size effects on a reactive matrix , 2020 .

[29]  Orhan Canpolat,et al.  Evaluation of the 12–24 mm basalt fibers and boron waste on reinforced metakaolin-based geopolymer , 2020 .

[30]  Bin Wang,et al.  Biological and bioinspired materials: Structure leading to functional and mechanical performance , 2020, Bioactive materials.

[31]  G. Mucsi,et al.  Mechanical Properties of Basalt Fiber Reinforced Fly Ash-Based Geopolymer Composites , 2020 .

[32]  J. Labrincha,et al.  Geopolymer foams: An overview of recent advancements , 2020 .

[33]  B. Panda,et al.  Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing , 2019, Composites Part B: Engineering.

[34]  Frances Y. Su,et al.  Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs , 2019, Advanced materials.

[35]  Ming Jen Tan,et al.  Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing , 2019, Journal of Cleaner Production.

[36]  E. Duoss,et al.  Fiber motion in highly confined flows of carbon fiber and non-Newtonian polymer , 2019, Journal of Non-Newtonian Fluid Mechanics.

[37]  Ming Jen Tan,et al.  Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing , 2018, Cement and Concrete Composites.

[38]  P. Grindrod,et al.  Glacial and gully erosion on Mars: A terrestrial perspective , 2018, Geomorphology.

[39]  A. Akbarzadeh,et al.  3D printed architected polymeric sandwich panels: Energy absorption and structural performance , 2018, Composite Structures.

[40]  Paolo Colombo,et al.  Direct ink writing of geopolymeric inks , 2017 .

[41]  Chunjie Yan,et al.  Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack , 2017 .

[42]  M. Meyer,et al.  Geopolymers from lunar and Martian soil simulants , 2017 .

[43]  Zhihua Yang,et al.  Crystallization kinetics and microstructure evolution of reduced graphene oxide/geopolymer composites , 2016 .

[44]  Francisco Chinesta,et al.  A multi-scale description of orientation in simple shear flows of confined rod suspensions , 2016 .

[45]  M. Meyers,et al.  Structural Design Elements in Biological Materials: Application to Bioinspiration , 2015, Advanced materials.

[46]  Xiongyao Li,et al.  JMSS-1: a new Martian soil simulant , 2015, Earth, Planets and Space.

[47]  J. Lewis,et al.  3D‐Printing of Lightweight Cellular Composites , 2014, Advanced materials.

[48]  G. Neumann,et al.  The lunar moho and the internal structure of the Moon: A geophysical perspective , 2013 .

[49]  R. V. Morris,et al.  X-ray Diffraction Results from Mars Science Laboratory: Mineralogy of Rocknest at Gale Crater , 2013, Science.

[50]  L. Gibson.  The hierarchical structure and mechanics of plant materials , 2012, Journal of The Royal Society Interface.

[51]  Christine Ortiz,et al.  Stiffness and strength of suture joints in nature. , 2011, Physical review. E, Statistical, nonlinear, and soft matter physics.

[52]  W. Lutze,et al.  Kinetics of fly ash geopolymerization , 2011 .

[53]  Prinya Chindaprasirt,et al.  Influence of NaOH solution on the synthesis of fly ash geopolymer , 2009 .

[54]  S. S. Rout,et al.  Spectral properties of simulated impact glasses produced from martian soil analogue JSC Mars-1 , 2009 .

[55]  Christine Ortiz,et al.  Bioinspired Structural Materials , 2008, Science.

[56]  J. Deventer,et al.  The geopolymerisation of alumino-silicate minerals , 2000 .