BILL-E: Robotic Platform for Locomotion and Manipulation of Lightweight Space Structures

We describe a robotic platform for traversing and manipulating a modular 3D lattice structure. The robot is designed to operate within a specifically structured environment, which enables low numbers of degrees of freedom (DOF) compared to robots performing comparable tasks in an unstructured environment. This allows for simple controls, as well as low mass and cost. This approach, designing the robot relative to the local environment in which it operates, results in a type of robot we call a “relative robot.” We describe a bipedal robot that can locomote across a periodic lattice structure, as well as being able to handle, manipulate, and transport building block parts that compose the lattice structure. Based on a general inchworm design, the robot has added functionality for travelling over and operating on a host structure.

[1]  Kenneth C. Cheung,et al.  Reversibly Assembled Cellular Composite Materials , 2013, Science.

[2]  Daniela Rus,et al.  Shady3D: A Robot that Climbs 3D Trusses , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[3]  William Whittaker,et al.  Skyworker: a robot for assembly, inspection and maintenance of large scale orbital facilities , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[4]  Mark A. Minor,et al.  Climbing the walls [robots] , 2002, IEEE Robotics Autom. Mag..

[5]  Fritz Scholz.  Tolerance Stack Analysis Methods , 1995 .

[6]  Dick Price.  Climbing the walls , 1995, IEEE Expert.

[7]  W. Doggett,et al.  Robotic assembly of truss structures for space systems and future research plans , 2002, Proceedings, IEEE Aerospace Conference.

[8]  S Lake Mark,et al.  Evaluation of Hardware and Procedures for Astronaut Assembly and Repair of Large Precision Reflectors , 2000 .

[9]  Robert J. Wood,et al.  Robot self-assembly by folding: A printed inchworm robot , 2013, 2013 IEEE International Conference on Robotics and Automation.

[10]  Marvin D. Rhodes,et al.  Baseline Tests of an Autonomous Telerobotic System for Assembly of Space Truss Structures , 1994 .

[11]  William Whittaker,et al.  ROBOTICS FOR ASSEMBLY, INSPECTION, AND MAINTENANCE OF SPACE MACROFACILITIES , 2000 .

[12]  Thomas W. Murphey,et al.  SOME PERFORMANCE TRENDS IN HIERARCHICAL TRUSS STRUCTURES , 2003 .

[13]  Daniel Cellucci,et al.  Meso-Scale Digital Materials: Modular, Reconfigurable, Lattice-Based Structures , 2016 .

[14]  Martin M. Mikulas,et al.  Design, construction and utilization of a space station assembled from 5-meter erectable struts , 1986 .

[15]  José Manuel Pastor,et al.  A climbing autonomous robot for inspection applications in 3D complex environments , 2000, Robotica.

[16]  Chang-Soo Han,et al.  A survey of climbing robots: Locomotion and adhesion , 2010 .

[17]  Yuzuru Terada,et al.  Automatic assembly system for a large-scale modular structure - hardware design of module and assembler robot , 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566).

[18]  Daniela Rus,et al.  Navigating 3D steel web structures with an inchworm robot , 1996, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS '96.

[19]  R Doggett William.  A Guidance Scheme for Automated Tetrahedral Truss Structure Assembly Based on Machine Vision , 1996 .

[20]  Hod Lipson,et al.  Structure-Reconfiguring Robots: Autonomous Truss Reconfiguration and Manipulation , 2013, IEEE Robotics & Automation Magazine.

[21]  John T. Dorsey,et al.  An integrated in-space construction facility for the 21st century , 1988 .

[22]  Mark A. Minor,et al.  Under-Actuated Kinematic Structures for Miniature Climbing Robots , 2003 .

[23]  Benjamin Jenett,et al.  Relative Robots: Scaling Automated Assembly of Discrete Cellular Lattices , 2016 .

[24]  John T. Dorsey,et al.  Truss Performance and Packaging Metrics , 2006 .