A Comprehensive Review of Solutions and Strategies for Cold Start of Automotive Proton Exchange Membrane Fuel Cells

Proton exchange membrane fuel cell (PEMFC) can be a significant eco-friendly alternative power source for vehicles. However, under subfreezing conditions, cell degradation and irreversible performance decay can occur because of ice formation and repetitive thaw/freeze cycles. These problems have limited the further commercialization of PEMFC in cold weather countries. Thus, many improvements have been made to repair the freeze protection and rapid cold startup problems in PEMFC vehicles. In this paper, a comprehensive review dedicated to engineers of the recent research progress on the PEMFC cold start problems is presented. Systems and methods for fuel cell shutdown are summarized and classified into two categories: purge solution and material to avoid freezing. Regarding the system and solutions for PEMFC cold startup, different heating solutions are classified into two main groups depending on their heating sources and categorized as internal and external heating methods. This paper concludes with a detailed review of cold startup strategies based on an exhaustive survey of journal papers and patents.

[1]  Rajesh K. Ahluwalia,et al.  Rapid self-start of polymer electrolyte fuel cell stacks from subfreezing temperatures , 2006 .

[2]  Qing Du,et al.  Maximum power cold start mode of proton exchange membrane fuel cell , 2014 .

[3]  Manish Khandelwal,et al.  One-dimensional thermal model of cold-start in a polymer electrolyte fuel cell stack , 2007 .

[4]  Xianguo Li,et al.  Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell during cold start processes , 2011 .

[5]  Ugo Icardi,et al.  Effect of Freezing Conditions on PEM-FC Components , 2009 .

[6]  Hyunchul Ju,et al.  Improving the cold-start capability of polymer electrolyte fuel cells (PEFCs) by using a dual-function micro-porous layer (MPL): Numerical simulations , 2013 .

[7]  アブデラマン アトビ,et al.  Method of improving the cold start capability of an electrochemical fuel cell , 2000 .

[8]  Michael P. Kanouff,et al.  Development of a hydrogen catalytic heater for heating metal hydride hydrogen storage systems , 2012 .

[9]  Min-Soo Kim,et al.  Study on a purge method using pressure reduction for effective water removal in polymer electrolyte membrane fuel cells , 2015 .

[10]  Hua Meng,et al.  Numerical studies of cold-start phenomenon in PEM fuel cells , 2008 .

[11]  P. Sicard,et al.  Thermal Management Strategies for Cold Start of Automotive PEMFC , 2015, 2015 IEEE Vehicle Power and Propulsion Conference (VPPC).

[12]  Zhongjun Hou,et al.  Catalytic hydrogen/oxygen reaction assisted the proton exchange membrane fuel cell (PEMFC) startup at subzero temperature , 2008 .

[13]  Tomohiro Ogawa,et al.  The Design and Performance of a PEFC at a Temperature Below Freezing , 2004 .

[14]  Chao-Yang Wang,et al.  Cold Start of Polymer Electrolyte Fuel Cells , 2009 .

[15]  Shanhai Ge,et al.  In Situ Imaging of Liquid Water and Ice Formation in an Operating PEFC during Cold Start , 2006 .

[16]  Li Jia,et al.  Experimental investigation on dynamic characteristics of proton exchange membrane fuel cells at subzero temperatures , 2014 .

[17]  Zhigang Shao,et al.  Reversible performance loss induced by sequential failed cold start of PEM fuel cells , 2011 .

[18]  Hiroyuki Uchida,et al.  Investigation of the effect of pore diameter of gas diffusion layers on cold start behavior and cell performance of polymer electrolyte membrane fuel cells , 2013 .

[19]  A. Mujumdar,et al.  Passive thermal management for PEM fuel cell stack under cold weather condition using phase change materials (PCM) , 2013 .

[20]  토루 나카무라,et al.  Fuel-cell power generating system , 1997 .

[21]  Bryan S. Pivovar,et al.  Freeze/Thaw Effects in PEM Fuel Cells , 2006 .

[22]  Yi Yu,et al.  A review on performance degradation of proton exchange membrane fuel cells during startup and shutdown processes: Causes, consequences, and mitigation strategies , 2012 .

[23]  松岡直哉.  Warm-up of fuel cell power plant , 2002 .

[24]  Yi Li,et al.  Internal behavior of segmented fuel cell during cold start , 2014 .

[25]  Kodjo Agbossou,et al.  Proton Exchange Membrane Fuel Cell Operation and Degradation in Short‐Circuit , 2014 .

[26]  Hua Meng,et al.  Numerical analyses of non-isothermal self-start behaviors of PEM fuel cells from subfreezing startup temperatures , 2008 .

[27]  Chao-Yang Wang,et al.  Current Ramping: A Strategy for Rapid Start-up of PEMFCs from Subfreezing Environment , 2010 .

[28]  Hubert A. Gasteiger,et al.  PEM Fuel Cell Operation at − 20 ° C . II. Ice Formation Dynamics, Current Distribution, and Voltage Losses within Electrodes , 2008 .

[29]  Geonhui Gwak,et al.  Numerical investigation of cold-start behavior of polymer-electrolyte fuel-cells from subzero to normal operating temperatures – Effects of cell boundary and operating conditions , 2014 .

[30]  Chao-Yang Wang,et al.  Non-isothermal cold start of polymer electrolyte fuel cells , 2007 .

[31]  In-Hwan Oh,et al.  Characteristics of the PEMFC Repetitively Brought to Temperatures below 0°C , 2003 .

[32]  Satish G. Kandlikar,et al.  Fundamental Research Needs in Combined Water and Thermal Management Within a Proton Exchange Membrane Fuel Cell Stack Under Normal and Cold-Start Conditions , 2009 .

[33]  Hyunchul Ju,et al.  Large-scale cold start simulations for automotive fuel cells , 2014, 2014 5th International Renewable Energy Congress (IREC).

[34]  Hua Meng,et al.  Numerical studies of cold‐start phenomena in PEM fuel cells: A review , 2011 .

[35]  A. Vahidi,et al.  A review of the main parameters influencing long-term performance and durability of PEM fuel cells , 2008 .

[36]  R. M. Moore,et al.  Polymer electrolyte fuel cell stack thermal model to evaluate sub-freezing startup , 2005 .

[37]  Bo Ki Hong,et al.  Influence of anisotropic bending stiffness of gas diffusion layers on the degradation behavior of po , 2011 .

[38]  Nobuyuki Kitamura,et al.  Recent Advances in TOYOTA FCHV-adv Fuel Cell System , 2010 .

[39]  Chao-Yang Wang,et al.  Isothermal Cold Start of Polymer Electrolyte Fuel Cells , 2007 .

[40]  Dai Gil Lee,et al.  Composite sandwich endplates with a compliant pressure distributor for a PEM fuel cell , 2015 .

[41]  Takemi Chikahisa,et al.  Cold start characteristics and freezing mechanism dependence on start-up temperature in a polymer electrolyte membrane fuel cell , 2012 .

[42]  Kimihiko Sugiura,et al.  Development of Thermal Insulation for Residential Fuel Cells System Elucidation of the Heat Transfer Mechanism in Insulation , 2015 .

[43]  그라소앨버트피.,et al.  Method and apparatus for preventing water in fuel cell power plants from freezing during storage , 2003 .

[44]  후지따노부오,et al.  Fuel cell system and method of controlling the same fuel cell system , 2003 .

[45]  Shanhai Ge,et al.  Characteristics of subzero startup and water/ice formation on the catalyst layer in a polymer electrolyte fuel cell , 2007 .

[46]  Chao-Yang Wang,et al.  Effects of operating and design parameters on PEFC cold start , 2007 .

[47]  Gholamreza Karimi,et al.  Cold start characteristics of proton exchange membrane fuel cells , 2011 .

[48]  Hossein Toghiani,et al.  Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components , 2006 .

[49]  Young-Jun Sohn,et al.  3D neutron tomography of a polymer electrolyte membrane fuel cell under sub-zero conditions , 2012 .

[50]  Hyunchul Ju,et al.  Numerical evaluation of a dual-function microporous layer under subzero and normal operating temperatures for use in automotive fuel cells , 2014 .

[51]  Daniel Hissel,et al.  A review of multi-stack and modular fuel cell systems: Interests, application areas and on-going research activities , 2014 .

[52]  Qian Guo,et al.  Modeling of assisted cold start processes with anode catalytic hydrogen–oxygen reaction in proton exchange membrane fuel cell , 2013 .

[53]  Chao-Yang Wang,et al.  Potentiostatic Start-Up of PEMFCs from Subzero Temperatures , 2008 .

[54]  Sichuan Xu,et al.  Experiment and simulation study on cold start of automotive PEMFC , 2011, 2011 International Conference on Electric Information and Control Engineering.

[55]  Marco Sorrentino,et al.  A review on model-based diagnosis methodologies for PEMFCs , 2013 .

[56]  Chang-Soo Kim,et al.  Analysis on the freeze/thaw cycled polymer electrolyte fuel cells , 2010 .

[57]  Hyunchul Ju,et al.  Comparison of numerical simulation results and experimental data during cold-start of polymer electrolyte fuel cells , 2012 .

[58]  Rodney L. Borup,et al.  Cold start of polymer electrolyte fuel cells: Three-stage startup characterization , 2010 .

[59]  Mahlon Wilson,et al.  Scientific aspects of polymer electrolyte fuel cell durability and degradation. , 2007, Chemical reviews.

[60]  Eric Miller,et al.  This project addresses the following technical barriers from the Photoelectrochemical Hydrogen Production section of the Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan: , 2015 .

[61]  Chao-Yang Wang,et al.  Gas Purge in a Polymer Electrolyte Fuel Cell , 2007 .

[62]  高桥直树.  Fuel cell stack defrosting , 2003 .

[63]  Hyunchul Ju,et al.  Evaluating cold-start behaviors of end and intermediate cells in a polymer electrolyte fuel cell (PEFC) stack , 2012 .

[64]  Karren L. More,et al.  PEM Fuel Cell Durability With Transportation Transient Operation , 2006 .

[65]  R. Lin,et al.  Rapid cold start of proton exchange membrane fuel cells by the printed circuit board technology , 2014 .

[66]  Zhongmin Wan,et al.  A Review on Cold Start of Proton Exchange Membrane Fuel Cells , 2014 .

[67]  Adam Z. Weber,et al.  Non-isothermal melting of ice in the gas-diffusion layer of a proton-exchange-membrane fuel cell , 2013 .

[68]  Kodjo Agbossou,et al.  Online identification of semi-empirical model parameters for PEMFCs , 2014 .

[69]  Kui Jiao,et al.  Modeling of cold start processes and performance optimization for proton exchange membrane fuel cell stacks , 2014 .

[70]  Chao-Yang Wang,et al.  Water removal from a PEFC during gas purge , 2008 .

[71]  Sébastien Rosini,et al.  Cold Start and Freeze/Thaw Cycles Effect on PEFMC Performances , 2009 .

[72]  Zhigang Shao,et al.  Investigation of resided water effects on PEM fuel cell after cold start , 2007 .

[73]  Mario Zedda,et al.  Statistic analysis of operational influences on the cold start behaviour of PEM fuel cells , 2005 .

[74]  Shanhai Ge,et al.  Cyclic Voltammetry Study of Ice Formation in the PEFC Catalyst Layer during Cold Start , 2007 .

[75]  Anthony D. Santamaria,et al.  Vacuum-assisted drying of polymer electrolyte membrane fuel cell , 2013 .

[76]  Sousso Kelouwani,et al.  Proton exchange membrane fuel cells cold startup global strategy for fuel cell plug-in hybrid electric vehicle , 2012 .

[77]  Yun Wang,et al.  A review of polymer electrolyte membrane fuel cells: Technology, applications,and needs on fundamental research , 2011 .

[78]  Qing Du,et al.  Analysis of cold start processes in proton exchange membrane fuel cell stacks , 2013 .

[79]  木村义人,et al.  The fuel cell system , 2009 .

[80]  Suhao He,et al.  One-Dimensional Transient Model for Frost Heave in Polymer Electrolyte Fuel Cells I. Physical Model , 2006 .