Solar or surplus heat-driven actuators using metal hydride alloys

Abstract A metal hydride (MH) actuator provides mechanical work by applying the hydrogen pressure transition that originates from the reversible reaction of the MH alloy as it absorbs and desorbs hydrogen gas. The MH actuators that have been reported employ a Peltier element or an electrical heating resistance wire as a heat source. This paper describes the design of an MH actuator that is driven by low-quality heat sources, such as solar heat or surplus heat. A certain composition of a LaNi 5 -based alloy that produces desorbing and absorbing reactions through a low-temperature difference is specified. This alloy composition can provide a large amount of hydrogen desorption using solar heat or surplus heated water and a large amount of hydrogen absorption by natural air cooling in an adequate reaction time. To improve the moving speed and to control the performance, a reciprocating air compressor that applies this solar or surplus heat-driven MH actuator is proposed. These findings support the efficacy of an MH actuator operating without electric or fossil fuel energy consumption.

[1]  K.H.J. Buschow,et al.  Hydrogen absorption in LaNi5 and related compounds: Experimental observations and their explanation , 1974 .

[3]  Michael O'Keeffe,et al.  Hydrogen Storage in Microporous Metal-Organic Frameworks , 2003, Science.

[4]  J. Reilly,et al.  Formation and properties of iron titanium hydride , 1974 .

[5]  Tohru Ifukube,et al.  A basic study for a robotic transfer aid system based on human motion analysis , 2001, Adv. Robotics.

[6]  S. Yamanaka,et al.  Design and development of MH actuator system , 2004 .

[7]  F. Michel,et al.  On-board equipment for liquid hydrogen vehicles , 1998 .

[8]  Ibrahim Dincer,et al.  On hydrogen and hydrogen energy strategies. I: current status and needs , 2005 .

[9]  Mitsuru Sato,et al.  Development of a soft metal hydride actuator using a laminate bellows for rehabilitation systems , 2009 .

[10]  Tohru Ifukube,et al.  Portable Pneumatic Actuator System Using MH Alloys, Employed as Assistive Devices , 2007, J. Robotics Mechatronics.

[11]  M Momirlan,et al.  Current status of hydrogen energy , 2002 .

[12]  S Ino,et al.  Application of hydrogen absorbing alloys to medical and rehabilitation equipment. , 1997, IEEE transactions on rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society.

[13]  D. Bethune,et al.  Storage of hydrogen in single-walled carbon nanotubes , 1997, Nature.

[14]  M. Deluchi,et al.  Hydrogen vehicles: an evaluation of fuel storage, performance, safety, environmental impacts, and cost , 1989 .