Robust autotuning MPC for a class of process control applications

This paper introduces a robust methodology for autotuning design parameters in the EPSAC (Extended Prediction Self-Adaptive Control) approach to MPC (Model based Predictive Control). The method requires from the user solely a well-chosen sampling period of the process and, in case of process with time delay, the amount of delayed samples. The main design parameter, the prediction horizon, is related to the open loop dynamics of the system and set to a relatively large value for a robust control performance. Process model is obtained apriori from step response in presence of 20% noise and later updated during closed loop simulations. The results indicate in both simulation and experimental study that the methodology is suitable for some classes of chemical processes or other processes with similar dynamic profiles.

[1]  R. De Keyser,et al.  Extended Prediction Self-Adaptive Control , 1985 .

[2]  J. A. Rossiter,et al.  Model-Based Predictive Control : A Practical Approach , 2017 .

[3]  Robin De Keyser,et al.  A self-tuning multistep predictor application , 1981, Autom..

[4]  Robin DE KEYSER,et al.  MODEL BASED PREDICTIVE CONTROL FOR LINEAR SYSTEMS , 2011 .

[5]  Robain De Keyser,et al.  DIRAC : A finite impulse response direct adaptive controller , 1989 .

[6]  Rmc Dekeyser,et al.  Improved mould-level control in a continuous steel casting line. , 1997 .

[7]  Jonathan Currie,et al.  Lightweight Model Predictive Control intended for embedded applications , 2010 .

[8]  Robain De Keyser,et al.  Nonlinear predictive control with dead-time compensator: Application to a solar power plant , 2009 .

[9]  R. De Keyser,et al.  Self-Adaptive Long-Range Predictive Control , 1985 .

[10]  R.M.C. De Keyse,et al.  A Comparative Study of Self-Adaptive Long-Range Predictive Control Methods , 1985 .

[11]  J. Brian Froisy,et al.  Model predictive control - Building a bridge between theory and practice , 2006, Comput. Chem. Eng..

[12]  Jay H. Lee,et al.  Model predictive control: past, present and future , 1999 .

[13]  Robain De Keyser,et al.  Time delay compensation for the secondary processes in a multivariable carbon isotope separation unit , 2012 .

[14]  Michel Struys,et al.  EPSAC‐controlled anesthesia with online gain adaptation , 2008 .

[15]  Clara M. Ionescu,et al.  Lessons learned from closed loops in engineering: towards a multivariable approach regulating depth of anaesthesia , 2014, Journal of Clinical Monitoring and Computing.

[16]  Robin De Keyser,et al.  Decentralized and centralized model predictive control to reduce the bullwhip effect in supply chain management , 2014, Comput. Ind. Eng..

[17]  Jun Zhao,et al.  Development and Application of an Integrated MPC Technology , 2008 .

[18]  R. De Keyser,et al.  Self-Tuning Load-Following Control of a Nuclear Power Plant , 1980 .

[19]  B. Bequette,et al.  Process Control: Modeling, Design and Simulation , 2003 .

[20]  Harald Waschl,et al.  Automatic Tuning Methods for MPC Environments , 2011, EUROCAST.

[21]  R. De Keyser,et al.  A Self-tuning Predictor as Operator Guide , 1979 .

[22]  M. Willis,et al.  ADVANCED PROCESS CONTROL , 2005 .

[23]  R. De Keyser,et al.  The disturbance model in model based predictive control , 2003, Proceedings of 2003 IEEE Conference on Control Applications, 2003. CCA 2003..

[24]  S. Joe Qin,et al.  A survey of industrial model predictive control technology , 2003 .

[25]  Abhishek Dutta,et al.  Comparison of two-level NMPC and ILC strategies for wet-clutch control , 2014 .

[26]  Quang N. Tran,et al.  A model-free approach for auto-tuning of model predictive control , 2014 .

[27]  G. Valencia-Palomo,et al.  Auto-tuned Predictive Control Based on Minimal Plant Information , 2009 .