论文信息 - Formaldehyde content in and VOC release from particleboards made of fibrous chips

Formaldehyde content in and VOC release from particleboards made of fibrous chips

The aim of this research was to investigate formaldehyde content in and volatile organic compounds release from particleboards produced from fibrous chips. The object of the tests were panels produced from fibrous chips of black locust Robinia Pseudoacacia L. and willow Salix Viminalis L., as well as from typical industrial particles. The results show that formaldehyde content in the panels produced from willow fibrous chips is similar to the content in the panels made of industrial particles. The concentration of total volatile organic compounds measured after 4 weeks of storage is significantly lower than the required by the existing regulations.

M. Witczak | G. Kowaluk | M. Komorowicz | D. Fuczek

[1] François Maupetit,et al. Characterization of VOC and formaldehyde emissions from a wood based panel: results from an inter-laboratory comparison. , 2010, Chemosphere.

[2] P. Beer,et al. The quality of milling of the particleboards produced from fibrous chips. , 2010 .

[3] G. Koch,et al. Wood properties of juvenile and mature heartwood in Robinia pseudoacacia L. , 2010, Wood Science and Technology.

[4] R. Wimmer,et al. Wood-borne formaldehyde varying with species, wood grade, and cambial age , 2009 .

[5] E. Roffael. Volatile organic compounds and formaldehyde in nature, wood and wood based panels , 2006, Holz als Roh- und Werkstoff.

[6] Gao Qiu-ling,et al. Contrast of GB18580-2001 & EN 120-Extraction Method of Formaldehyde Content Determination for Wood-based Panel Products ( known as perforator method ) , 2005 .

[7] M. Schäfer,et al. On the formaldehyde release of wood , 2000, Holz als Roh- und Werkstoff.