Effect of microstructure on electrical and mechanical properties of La5.4WO12-δ proton conductor

[1]  J. M. Serra,et al.  Influence of the La6W2O15 Phase on the Properties and Integrity of La6-xWO12-?–Based Membranes , 2019, Chemistry and Materials Research.

[2]  E. Forster,et al.  Stability and sintering of MgO as a substrate material for Lanthanum Tungstate membranes , 2017 .

[3]  J. Malzbender,et al.  Mechanical properties of tape casted Lanthanum Tungstate for membrane substrate application , 2016 .

[4]  R. Dittmeyer,et al.  Crystal structure of Re‐substituted lanthanum tungstate La5.4W1−yReyO12–δ (0 ≤ y ≤ 0.2) studied by neutron diffraction , 2016 .

[5]  J. M. Serra,et al.  Nanoscale order in the frustrated mixed conductor La5.6WO12−δ , 2016 .

[6]  O. Guillon,et al.  Preparation and sintering behaviour of La5.4WO12−δ asymmetric membranes with optimised microstructure for hydrogen separation , 2015 .

[7]  A. Ismail,et al.  Recent Progress in Zeolite/Zeotype Membranes , 2015 .

[8]  Jürgen Malzbender,et al.  Creep behavior of perovskite-type oxides Ba0.5Sr0.5(Co0.8Fe0.2)1−xZrxO3−δ , 2015 .

[9]  J. Malzbender,et al.  Creep behavior of porous La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen transport membrane supports , 2015 .

[10]  J. Malzbender,et al.  Review of mechanical characterization methods for ceramics used in energy technologies , 2014 .

[11]  J. Malzbender,et al.  Transitions of Ba0.5Sr0.5Co0.8Fe0.2O3-δ and La0.58Sr0.4Co0.2Fe0.8O3-δ , 2014 .

[12]  E. Forster,et al.  Ceramic materials for H2 transport membranes applicable for gas separation under coal-gasification-related conditions , 2014 .

[13]  A. Magrasó,et al.  Effects of the La/W ratio and doping on the structure, defect structure, stability and functional properties of proton-conducting lanthanum tungstate La28−xW4+xO54+δ. A review , 2014 .

[14]  J. Malzbender,et al.  Steady-state creep of porous and an extended analysis on the creep of dense BSCFZ perovskite , 2014 .

[15]  J. M. Serra,et al.  Hydrogen separation in La5.5WO11.25−δ membranes , 2013 .

[16]  J. M. Serra,et al.  Synthesis and characterization of nonsubstituted and substituted proton-conducting La(6-x)WO(12-y). , 2013, Inorganic chemistry.

[17]  J. Malzbender,et al.  Creep behaviour of membrane and substrate materials for oxygen separation units , 2013 .

[18]  T. Norby,et al.  Inter-diffusion in lanthanum tungsten oxide , 2013 .

[19]  J. M. Serra,et al.  Enhanced H2 separation through mixed proton-electron conducting membranes based on La5.5 W0.8 M0.2 O11.25-δ. , 2013, ChemSusChem.

[20]  J. Malzbender,et al.  Ferroelastic deformation of La0.58Sr0.4Co0.2Fe0.8O3−δ under uniaxial compressive loading , 2013 .

[21]  J. M. Serra,et al.  Study of hydrogen permeation in (La5/6Nd1/6)5.5WO12-δ membranes , 2012 .

[22]  T. Norby,et al.  Defect structure and its nomenclature for mixed conducting lanthanum tungstates La28–xW4+xO54+3x/2 , 2012 .

[23]  M. Islam,et al.  Complete structural model for lanthanum tungstate: a chemically stable high temperature proton conductor by means of intrinsic defects , 2012 .

[24]  J. Malzbender,et al.  Mechanical properties and lifetime predictions for Ba0.5Sr0.5Co0.8Fe0.2O3−δ membrane material , 2011 .

[25]  T. Scherb.  Strukturelle Charakterisierung von Wasserstoff trennenden Gasseparationsmembranen auf Lanthanoid-Wolframat-Basis , 2011 .

[26]  J. Malzbender,et al.  Influence of thermal history on the cubic-to-hexagonal phase transformation and creep behaviour of B , 2011 .

[27]  M. Segarra,et al.  Determination of hardness, Young's modulus and fracture toughness of lanthanum tungstates as novel proton conductors , 2011 .

[28]  J. Malzbender,et al.  Elastic anomaly and internal friction of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ and La_0.58Sr_0.4Co_0.2Fe_0.8O_3-δ , 2011 .

[29]  J. M. Serra,et al.  La5.5WO12-δ Characterization of Transport Properties under Oxidizing Conditions: A Conductivity Relaxation Study , 2011 .

[30]  L. Singheiser,et al.  Creep behaviour of tubular Ba0.5Sr0.5Co0.8Fe0.2O3−δ gas separation membranes , 2011 .

[31]  Doris Sebold,et al.  Potentialities of microporous membranes for H2/CO2 separation in future fossil fuel power plants: Evaluation of SiO2, ZrO2, Y2O3–ZrO2 and TiO2–ZrO2 sol–gel membranes , 2010 .

[32]  F. Goutenoire,et al.  Structure determination of α-La6W2O15 , 2010 .

[33]  Rolf W. Steinbrech,et al.  A review of advanced techniques for characterising SOFC behaviour , 2009 .

[34]  A. Magrasó,et al.  New crystal structure and characterization of lanthanum tungstate "La6WO12" prepared by freeze-drying synthesis. , 2009, Dalton transactions.

[35]  L. Singheiser,et al.  Anomalies in the thermomechanical behavior of Ba0.5Sr0.5Co0.8Fe0.2O3−δ ceramic oxygen conductive membranes at intermediate temperatures , 2009 .

[36]  L. Singheiser,et al.  Mechanical properties of La0.58Sr0.4Co0.2Fe0.8O3-δ membranes , 2009 .

[37]  R. Haugsrud,et al.  Effects of protons and acceptor substitution on the electrical conductivity of La6WO12 , 2008 .

[38]  André P. Vieira,et al.  Subcritical crack growth: the microscopic origin of Paris' law. , 2008, Physical review letters.

[39]  R. Haugsrud.  Defects and transport properties in Ln6WO12 (Ln = La, Nd, Gd, Er) , 2007 .

[40]  T. Schober.  Applications of oxidic high-temperature proton conductors , 2003 .

[41]  N. Bonanos.  Oxide-based protonic conductors: point defects and transport properties , 2001 .

[42]  P. Macaudiere,et al.  Rare-earth and tungsten oxynitrides with a defect fluorite-type structure as new pigments , 2001 .

[43]  H. Iwahara,et al.  Proton conduction in non-perovskite-type oxides at elevated temperatures , 2001 .

[44]  J. Malzbender.  The use of the indentation loading curve to detect fracture of coatings , 2001 .

[45]  J. Malzbender,et al.  Determination of the elastic modulus and hardness of sol–gel coatings on glass: influence of indenter geometry , 2000 .

[46]  Michael Stoukides,et al.  Solid-Electrolyte Membrane Reactors: Current Experience and Future Outlook , 2000 .

[47]  J. Malzbender.  Cracking and residual stress in hybrid coatings on float glass , 2000 .

[48]  K. Kreuer.  Proton Conductivity: Materials and Applications , 1996 .

[49]  Truls Norbya.  Proton conduction in oxides , 1990 .

[50]  H. Iwahara,et al.  Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production , 1981 .

[51]  M. Yoshimura,et al.  High temperature phase relation in the system La2O3WO3 , 1976 .

[52]  Robert L. Coble,et al.  A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials , 1963 .

[53]  Conyers Herring,et al.  Diffusional Viscosity of a Polycrystalline Solid , 1950 .

[54]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[55]  T. Norby.  Proton Conductivity in Perovskite Oxides , 2009 .

[56]  S. Tosti,et al.  Synthesis, characterization, and applications of palladium membranes , 2008 .

[57]  J. Malzbender,et al.  Fracture test of thin sheet electrolytes for solid oxide fuel cells , 2007 .

[58]  M. Matthewson,et al.  Mechanical properties of ceramics , 1996 .

[59]  G. Alefeld,et al.  Hydrogen in metals I - Basic properties , 1978 .

[60]  L. Kachanov.  On subcritical crack growth , 1976 .

[61]  N. Mott,et al.  Report of a Conference on Strength of Solids , 1948 .

[62]  K. Kreuer.  First published online as a Review in Advance on April 9, 2003 PROTON-CONDUCTING OXIDES , 2022 .