The twin ports of Long Beach (POLB) and Los Angeles (POLA), consisting of fourteen individually gated terminals, combine to create the largest container port complex in the US. In 2015, the combined ports handled 15.4 million 20-foot equivalent units (TEUs), a 56% increase since 2000, expected to grow higher in the future. This large number of containers and the associated trips to/from the ports, result in traffic congestion, noise pollution, and greenhouse gas emissions in the vicinity of the ports. The current project studies the concept of “Centralized Processing of Chassis,” and the possibility of using it to mitigate some of these problems. This concept revolves around an off-dock terminal (or several off-dock terminals), referred to as Chassis Processing Facilities (CPFs). A CPF is located close to the port, where trucks will go to exchange chassis, thereby reducing traffic at the marine terminals, resulting in reduced travel times and reduced congestion. The current project develops the required analytical framework for modeling and optimization of the CPF use. The developed analytical model is applied to a case study in the Los Angeles/Long Beach port area. The case study identifies sixteen locations in the vicinity of the ports that can be potentially used as CPFs, and examines several scenarios of container pickup/drop-off transactions. The study presents comparisons between the case when chassis exchanges occur at the CPFs versus the case when chassis exchanges occur at the marine terminals. It is shown that a reduction of up to 20% in total travel time can be achieved when using the CPFs, as compared to using only the marine terminals. The study also shows that using up to three of the potential sixteen CPFs provides significant improvements to total travel time, but using more than three CPFs will have insignificant additional benefits. Moreover, a discrete event simulation model is developed and used for detailed simulation scenarios, as well as for examining and evaluating the performance of heuristic methods. View the NCST Project Webpage
[1]
Richard Margiotta,et al.
Traffic Congestion and Reliability: Making the Connection with Operations. Part 2: Operations Strategies
,
2006
.
[2]
Thomas O'Brien,et al.
Mitigating Urban Freight Through Effective Management of Truck Chassis
,
2016
.
[3]
Petros A. Ioannou,et al.
Automated container transport system between inland port and terminals
,
2006,
TOMC.
[4]
T. Notteboom.
Container Shipping And Ports: An Overview
,
2004
.
[5]
Petros A. Ioannou,et al.
Port dynamic empty container reuse
,
2006
.
[6]
Stefan Voß,et al.
Container terminal operation and operations research - a classification and literature review
,
2004,
OR Spectr..
[7]
Lam Mai,et al.
Impact of container chassis management practices in the United States on terminal operational efficiency: An operations and mitigation policy analysis
,
2011
.
[8]
Iris F. A. Vis,et al.
Transshipment of containers at a container terminal: An overview
,
2003,
Eur. J. Oper. Res..
[9]
Rommert Dekker,et al.
A chassis exchange terminal to reduce truck congestion at container terminals
,
2013
.
[10]
Guoyuan Wu,et al.
Improving Vehicle Fleet, Activity, and Emissions Data for On-Road Mobile Sources Emissions Inventories
,
2011
.