A generalized DQ impedance model of three phase diode rectifier

Three-phase ac systems can be transferred into dq axis, where stability analysis becomes much simpler. In order to apply the stability criterion in AC system, an equivalent DQ admittance model for the three-phase diode rectifier has been developed in this paper, based on the ABC impedance model in paper [1]. Compared to the literature work, this model has two better features: (1) it is valid in a wide frequency range, which is from below fundamental frequency to high number times of fundamental frequency; (2) it considers the effect of the ac line impedance and output dc impedance. At different circuit parameters, including the extreme cases, the analytical modeling results and the numerical simulation results present excellent agreement, which demonstrates the accuracy of the analytical model.

[1]  Jian Sun,et al.  Frequency-Domain Modeling of Multipulse Converters by Double-Fourier Series Method , 2011, IEEE Transactions on Power Electronics.

[2]  K.J. Karimi,et al.  Small-signal input impedance modeling of line-frequency rectifiers , 2008, IEEE Transactions on Aerospace and Electronic Systems.

[3]  Jian Sun,et al.  Input Impedance Modeling and Analysis of Line-Commutated Rectifiers , 2007, 2007 IEEE Power Electronics Specialists Conference.

[4]  R. D. Middlebrook,et al.  Input filter considerations in design and application of switching regulators. , 1976 .

[5]  J. A. Weimer,et al.  Electrical power technology for the more electric aircraft , 1993, [1993 Proceedings] AIAA/IEEE Digital Avionics Systems Conference.

[6]  Jian Sun,et al.  Input Impedance Modeling of Multipulse Rectifiers by Harmonic Linearization , 2009, IEEE Transactions on Power Electronics.

[7]  Keith Corzine,et al.  Transient and dynamic average-value modeling of synchronous machine fed load-commutated converters , 1996 .

[8]  F. Wang,et al.  Analysis of New Step-up and Step-down Direct Symmetric 18-pulse Topologies for Aircraft Autotransformer-Rectifier Units , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[9]  F.C. Lee,et al.  Input filter design for power factor correction circuits , 1993, Proceedings of IECON '93 - 19th Annual Conference of IEEE Industrial Electronics.

[10]  Neville R. Watson,et al.  Power System Harmonic Analysis: Arrillaga/Power System Harmonic Analysis , 1997 .

[11]  D. R. Trainer,et al.  Analysis and practical evaluation of an 18-pulse rectifier for aerospace applications , 2004 .

[12]  M. Belkhayat,et al.  Stability criteria for AC power systems with regulated loads , 1997 .

[13]  Qin Lei,et al.  A generalized input impedance model of three phase diode rectifier , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[14]  Dushan Boroyevich,et al.  On the Ac stability of high power factor three-phase rectifiers , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[15]  Nathan O. Sokal.  System oscillations from negative input resistance at power input port of switching-mode regulator, amplifier, DC/DC converter, or DC/DC inverter , 1973 .

[16]  S. D. Sudhoff,et al.  Analysis and average-value modeling of an inductorless synchronous machine load commutated converter system , 1999 .

[17]  Fred C. Lee,et al.  A new control algorithm for three-phase PWM buck rectifier with input displacement factor compensation , 1993 .

[18]  D. Boroyevich,et al.  Assessment of multipulse converter average models for stability studies using a quasistationary small-signal technique , 2004, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..