Sensitivity of High-Frequency RF Circuits to Total Ionizing Dose Degradation

The combined effects of TID, process corner, and temperature on the performance of high frequency RF circuits are presented. TID experiments at 25°C and 100°C on NMOSFETs and PMOSFETs fabricated in a commercial 45 nm technology show varied degradation in DC and RF performance. The combination of variation due to TID, process, and temperature causes the NMOSFET parameters to fall out of the pre-irradiation process/voltage/temperature (PVT) operating space. TID-aware compact models of MOSFETs are developed based on measured parametric degradation of the transistor behavior. The compact models are used to design a K-band LC voltage-controlled oscillator (VCO), operating at 22 GHz without any compensation circuitry. Circuit simulations show that a 500 krad(SiO2) dose on the VCO operating at 100°C and at the slow process corner can result in circuit failure for biases less than 500 mV. For higher biases, TID causes degradation in frequency, amplitude, and phase noise, causing inability of the VCO to meet the desired performance specifications.

[1]  Albert Chin,et al.  A Low-Power K-Band CMOS VCO With Four-Coil Transformer Feedback , 2010, IEEE Microwave and Wireless Components Letters.

[2]  R.,et al.  Challenges in hardening technologies using shallow-trench isolation , 1998 .

[3]  Hong-Yeh Chang,et al.  $K$ -Band CMOS Differential and Quadrature Voltage-Controlled Oscillators for Low Phase-Noise and Low-Power Applications , 2012, IEEE Transactions on Microwave Theory and Techniques.

[4]  Y. Hao,et al.  A Bias-Varied Low-Power K-band VCO in 90 nm CMOS Technology , 2012, IEEE Microwave and Wireless Components Letters.

[5]  Y.T. Tee,et al.  Design techniques to combat process, temperature and supply variations in Bluetooth RFIC , 2003, IEEE Radio Frequency Integrated Circuits (RFIC) Symposium, 2003.

[6]  J.A.M. Geelen,et al.  An improved de-embedding technique for on-wafer high-frequency characterization , 1991, Proceedings of the 1991 Bipolar Circuits and Technology Meeting.

[7]  To-Po Wang.  A K-Band Low-Power Colpitts VCO With Voltage-to-Current Positive-Feedback Network in 0.18 $\mu{\rm m}$ CMOS , 2011, IEEE Microwave and Wireless Components Letters.

[8]  Tejasvi Das,et al.  Self-calibration of input-match in RF front-end circuitry , 2005, IEEE Transactions on Circuits and Systems II: Express Briefs.

[9]  En Xia Zhang,et al.  Trade-Offs Between RF Performance and Total-Dose Tolerance in 45-nm RF-CMOS , 2011, IEEE Transactions on Nuclear Science.

[10]  Yuan Lu,et al.  A simple four-port parasitic deembedding methodology for high-frequency scattering parameter and noise characterization of SiGe HBTs , 2003 .

[11]  J. Cressler,et al.  An 8–16 GHz SiGe Low Noise Amplifier With Performance Tuning Capability for Mitigation of Radiation-Induced Performance Loss , 2012, IEEE Transactions on Nuclear Science.

[12]  Jose-Luis Gonzalez Jimenez,et al.  Process and Temperature Compensation for RF Low-Noise Amplifiers and Mixers , 2010, IEEE Transactions on Circuits and Systems I: Regular Papers.

[13]  Kun-You Lin,et al.  A 24 GHz low power VCO with transformer feedback , 2009, 2009 IEEE Radio Frequency Integrated Circuits Symposium.

[14]  I. Filanovsky,et al.  Mutual compensation of mobility and threshold voltage temperature effects with applications in CMOS circuits , 2001 .