On-line reliability assessment for an electronic system subject to condition monitoring

We present a new approach for the on-line reliability assessment of an electronic system subject to condition monitoring. In this paper, the degradation of the electronic system is driven by a nonlinear Wiener process with a time drift, which is incorporated into the proportional hazards model to describe the hazard rate of the time to failure. Using the discretization of the degradation path and the time axis, closed-form approximations for the reliability quantities are obtained using the transition probability matrix. Unlike the conventional method which is applicable only for a small number of degradation states, the calculation of these quantities can be accomplished with just the basic manipulation of the transition matrix, which is computationally efficient and applicable to real-time conditional reliability calculation for a general number of states. The effectiveness of the proposed approach is demonstrated by a numerical study.

[1]  Wenbin Wang,et al.  A model to predict the residual life of aircraft engines based upon oil analysis data , 2005 .

[2]  Tarapong Sreenuch,et al.  Computationally Efficient, Real-Time, and Embeddable Prognostic Techniques for Power Electronics , 2015, IEEE Transactions on Power Electronics.

[3]  Qiang Zhou,et al.  Remaining useful life prediction of individual units subject to hard failure , 2014 .

[4]  Michael G. Pecht,et al.  A prognostics and health management roadmap for information and electronics-rich systems , 2010, Microelectron. Reliab..

[5]  Yan Gao,et al.  An application of DPCA to oil data for CBM modeling , 2006, Eur. J. Oper. Res..

[6]  Viliam Makis,et al.  An optimal condition-based maintenance policy for a degrading system subject to the competing risks of soft and hard failure , 2015, Comput. Ind. Eng..

[7]  Dragan Banjevic,et al.  Calculation of reliability function and remaining useful life for a Markov failure time process , 2006 .

[8]  Bo Guo,et al.  Real-time Reliability Evaluation with a General Wiener Process-based Degradation Model , 2014, Qual. Reliab. Eng. Int..

[9]  D. A. Evans,et al.  An approach to the probability distribution of cusum run length , 1972 .

[10]  Donghua Zhou,et al.  Remaining useful life estimation - A review on the statistical data driven approaches , 2011, Eur. J. Oper. Res..

[11]  Donghua Zhou,et al.  A Residual Storage Life Prediction Approach for Systems With Operation State Switches , 2014, IEEE Transactions on Industrial Electronics.

[12]  A. Ghasemi,et al.  Estimating Mean Residual Life for a Case Study of Rail Wagon Bearings , 2012, IEEE Transactions on Reliability.