Mechanical recycling of tags and labels residues using sugarcane bagasse ash

In this study, an alternative method for recycling residues of labels and stickers (parings) containing biaxically oriented polypropylene (BOPP) and polyurethane-based glue was discussed. The recycling of this type of material is complicated, once the separation and the milling processes are difficult to be accomplished, due to the presence of a large amount of glue. In this study, sugarcane bagasse ash was used to enable the milling process of stickers residues. Composites were prepared with post-consumer polypropylene extrusion with different polypropylene/parings ash ratio. These materials were analyzed by tensile, three point flexural, hardness, density, water absorption, Izod impact tests, thermogravimetric analysis, environmental exposure and scanning electron microscopy. Addition of sticker residues/ash to the polypropylene matrix makes the material more rigid and does not affect significantly thermal and degradation properties. Thus, the recycling process proposed in this paper is environmentally and economically viable.

[1]  M. Meier.  Sustainable polymers: reduced environmental impact, renewable raw materials and catalysis , 2014 .

[2]  Emerson M. Girotto,et al.  Synthesis of zeolite NaA from sugarcane bagasse ash , 2013 .

[3]  Gwm Gerrit Peters,et al.  Oriented Gamma Phase in Isotactic Polypropylene Homopolymer. , 2012, ACS macro letters.

[4]  A. Popoola,et al.  Effects of bone particle on the properties and microstructure of polypropylene/bone ash particulate composites , 2012 .

[5]  Eloisa B. Mano,et al.  Meio ambiente, poluição e reciclagem , 2010 .

[6]  Romel Dias Vanderlei,et al.  Estudo das características físicas e químicas da cinza do bagaço de cana-de-açúcar para uso na construção , 2010 .

[7]  Marcos Oliveira de Paula,et al.  Potencial da cinza do bagaço da cana-de-açúcar como material de substituição parcial de cimento Portland , 2009 .

[8]  G. Camino,et al.  PP and PBT composites filled with sepiolite : Morphology and thermal behaviour , 2008 .

[9]  W. L. Vasconcelos,et al.  Obtenção de compósitos de resíduos de ardósia e polipropileno , 2007 .

[10]  S. Canevarolo,et al.  Técnicas de caracterização de polímeros , 2004 .

[11]  Harun Nezih Türkçü.  Investigation of the crystallinity and orientation of polypropylene with respect to temperature changes using FT-IR, WRD, and Raman techniques , 2004 .

[12]  Kin Liao,et al.  Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites , 2003 .

[13]  Hanafi Ismail,et al.  Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composites , 2002 .

[14]  Carmen Peinado,et al.  Ageing and stabilisation of filled polymers: an overview , 1998 .

[15]  S. Bastide,et al.  Mechanical behaviour of polypropylene composites containing fine mineral filler: Effect of filler surface treatment , 1998 .

[16]  B. Pukánszky,et al.  Evaluation of interfacial interaction in polypropylene/surface treated CaCO3 composites , 1998 .

[17]  M. S. Rabello,et al.  Fotodegradação do polipropileno: Um processo essencialmente heterogêneo , 1997 .

[18]  Z. Ishak,et al.  Application of rice husk ash as fillers in polypropylene: Effect of titanate, zirconate and silane coupling agents , 1995 .

[19]  L. H. Carvalho,et al.  Efeitos da estabilização do Polipropileno nas propriedades térmicas, mecânicas e termo-mecânicas de compósitos de Polipropileno/Atapulgita , 1993 .

[20]  Y. Lin,et al.  Microdamage and interfacial adhesion in glass bead-filled high-density polyethylene , 1992 .