Efficient singular element for finite element analysis of quasi-TEM transmission lines and waveguides with sharp metal edges

The FEM presents a slow rate of convergence when it is used in the analysis of quasi-TEM transmission lines or homogeneous waveguides with field singularities. In order to improve this drawback, mesh techniques or vector elements that cope with the singularities can be used. A different solution is to employ scalar singular elements although, most of those that have been used are only compatible with first-order ordinary elements or can only be used with field singularities of order O(r/sup /spl minus/1/2/) and O(r/sup /spl minus/1/3/). In this paper, we present an improvement on the rate of convergence of FEM by employing a scalar singular element, which can be utilized for any order of singularity, is compatible with quadratic or higher order standard elements and is also easy to implement in standard finite element codes. Several transmission lines and waveguides with sharp metal edges have been analysed with a reduced number of degrees of freedom that compares well with other FEM approaches. We also show that electromagnetic fields computed using the proposed singular element have very good agreement with the ones theoretically expected from the singular edge condition. >

[1]  R. Wait,et al.  Singular Isoparametric Finite Elements , 1977 .

[2]  Y. Utsumi,et al.  Variational Analysis of Ridged Waveguide Modes , 1985 .

[3]  J. Van Bladel,et al.  Field singularities at metal-dielectric wedges , 1985 .

[4]  P. G. Ciarlet,et al.  General lagrange and hermite interpolation in Rn with applications to finite element methods , 1972 .

[5]  J. P. Montgomery,et al.  On the Complete Eigenvalue Solution of Ridged Waveguide , 1971 .

[6]  Raj Mittra,et al.  Quasi-TEM Analysis of Microwave Transmission Lines by the Finite-Element Method , 1986 .

[7]  T. Sarkar,et al.  Multiconductor Transmission Lines In Multilayered Dielectric Media , 1984 .

[8]  Z. J. Cendes,et al.  Magnetic field computation using Delaunay triangulation and complementary finite element methods , 1983 .

[9]  Jon P. Webb,et al.  Finite element analysis of dispersion in waveguides with sharp metal edges , 1988, 1988., IEEE MTT-S International Microwave Symposium Digest.

[10]  F. Medina,et al.  Capacitance and Inductance Matrices for Multistrip Structures in Multilayered Anisotropic Dielectrics , 1987 .

[11]  Madhavan Swaminathan,et al.  Computation of cutoff wavenumbers of TE and TM modes in waveguides of arbitrary cross sections using a surface integral formulation , 1990 .

[12]  M. Israel,et al.  An Efficient Finite Element Method for Nonconvex Waveguide Based on Hermitian Polynomials , 1987 .

[13]  P. K. Saha,et al.  Rectangular Waveguide with Two Double Ridges , 1983 .

[14]  P. Daly.  SINGULARITIES IN TRANSMISSION LINES , 1973 .

[15]  Jon P. Webb,et al.  Covariant-projection quadrilateral elements for the analysis of waveguides with sharp edges , 1991 .

[16]  G. Cambrell,et al.  Upper and Lower Bounds on the Characteristic Impedance of TEM Mode Transmission Lines (Correspondence) , 1966 .

[17]  Masanori Koshiba,et al.  Three-dimensional finite-element method with edge elements for electromagnetic waveguide discontinuities , 1991 .

[18]  B. Schiff.  Eigenvalues for ridged and other waveguides containing corners of angle 3 pi /2 or 2 pi by the finite element method , 1991 .

[19]  Jin-Fa Lee,et al.  Full-wave analysis of dielectric waveguides using tangential vector finite elements , 1991 .

[20]  J. Akin.  The generation of elements with singularities , 1976 .