Compressive strength prediction of nano-silica incorporated cement systems based on a multiscale approach

[1]  R. Hill.  Elastic properties of reinforced solids: some theoretical principles , 1963 .

[2]  A. Neville.  Properties of Concrete , 1968 .

[3]  E. Oñate,et al.  A plastic-damage model for concrete , 1989 .

[4]  K. van Breugel,et al.  Numerical Simulation of Hydration and Microstructural Development in Hardening Cement-Based Materials , 1995 .

[5]  W. Drugan,et al.  A micromechanics-based nonlocal constitutive equation and estimates of representative volume element size for elastic composites , 1996 .

[6]  André Zaoui,et al.  Structural morphology and constitutive behaviour of microheterogeneous materials , 1997 .

[7]  Jeeho Lee,et al.  Plastic-Damage Model for Cyclic Loading of Concrete Structures , 1998 .

[8]  Yunping Xi,et al.  Experimental study on the effect of aggregate content on fracture behavior of concrete , 2000 .

[9]  Dale P. Bentz,et al.  Influence of silica fume on diffusivity in cement-based materials: I. Experimental and computer modeling studies on cement pastes , 2000 .

[10]  Bhushan Lal Karihaloo,et al.  Effect of aggregate volume fraction on the fracture parameters of concrete: a meso-mechanical approach , 2001 .

[11]  Denis Damidot,et al.  Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker , 2001 .

[12]  A. Zaoui.  Continuum Micromechanics: Survey , 2002 .

[13]  Karen L. Scrivener,et al.  Backscattered electron imaging of cementitious microstructures: Understanding and quantification , 2004 .

[14]  F. Ulm,et al.  The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling , 2004 .

[15]  Petr Kabele,et al.  Multiscale framework for modeling of fracture in high performance fiber reinforced cementitious composites , 2007 .

[16]  Jong-Bin Park,et al.  Characteristics of cement mortar with nano-SiO2 particles , 2007 .

[17]  Chengbin Du,et al.  Numerical Simulation of Aggregate Shapes of Three-Dimensional Concrete and Its Applications , 2007 .

[18]  Y. Qing,et al.  Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume , 2007 .

[19]  M. Taha,et al.  Homogenization Model Examining the Effect of Nanosilica on Concrete Strength and Stiffness , 2010 .

[20]  Surendra P. Shah,et al.  Small Changes Can Make a Great Difference , 2010 .

[21]  Surendra P. Shah,et al.  Comparative Study of the Effects of Microsilica and Nanosilica in Concrete , 2010 .

[22]  Dachamir Hotza,et al.  Mortars with nano-SiO2 and micro-SiO2 investigated by experimental design , 2010 .

[23]  Sun-Myung Kim,et al.  Meso-scale computational modeling of the plastic-damage response of cementitious composites , 2011 .

[24]  Christian Hellmich,et al.  Upscaling quasi-brittle strength of cement paste and mortar: A multi-scale engineering mechanics model , 2011 .

[25]  Abdul-Ghani Olabi,et al.  Effect of colloidal nano-silica on the mechanical and physical behaviour of waste-glass cement mortar , 2012 .

[26]  Aly Marei Said,et al.  Properties of concrete incorporating nano-silica , 2012 .

[27]  M. Berra,et al.  Effects of nanosilica addition on workability and compressive strength of Portland cement pastes , 2012 .

[28]  Surendra P. Shah,et al.  Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials , 2012 .

[29]  J. Mier,et al.  Concrete Fracture: A Multiscale Approach , 2012 .

[30]  H. Mirzadeh,et al.  Modeling the compressive strength of cement mortar nano-composites , 2012 .

[31]  Jan Vorel,et al.  Multiscale simulations of concrete mechanical tests , 2012, J. Comput. Appl. Math..

[32]  Kiarash M. Dolatshahi,et al.  A three-dimensional cyclic meso-scale numerical procedure for simulation of unreinforced masonry structures , 2013 .

[33]  Wilson Ricardo Leal da Silva,et al.  Application of multiscale elastic homogenization based on nanoindentation for high performance concrete , 2013, Adv. Eng. Softw..

[34]  A. Hassan,et al.  Experimental and numerical studies of size effects of Ultra High Performance Steel Fibre Reinforced Concrete (UHPFRC) beams , 2013 .

[35]  G. Ma,et al.  Numerical simulation of dynamic tensile-failure of concrete at meso-scale , 2014 .

[36]  T. Pulngern,et al.  Effect of the particle size of nanosilica on the compressive strength and the optimum replacement content of cement mortar containing nano-SiO2 , 2014 .

[37]  S. Aleem,et al.  Hydration characteristic, thermal expansion and microstructure of cement containing nano-silica , 2014 .

[38]  V. Palmieri,et al.  Multiscale modeling of concrete and of the FRP–concrete interface , 2014 .

[39]  Chuanzeng Zhang,et al.  3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model , 2015 .

[40]  M. Nili,et al.  Investigating the effect of the cement paste and transition zone on strength development of concrete containing nanosilica and silica fume , 2015 .

[41]  Jeung-Hwan Doh,et al.  The effects of CFRP orientation on the strengthening of reinforced concrete structures , 2016 .

[42]  Yunsheng Zhang,et al.  A three-dimensional multi-scale method to simulate the ion transport behavior of cement-based materials , 2016 .

[43]  J. Bolander,et al.  Multiscale modeling of strain-hardening cementitious composites , 2016 .

[44]  G. Chanvillard,et al.  Micromechanical multiscale fracture model for compressive strength of blended cement pastes , 2016 .

[45]  Ting Huang,et al.  Multiscale modelling of multiple-cracking tensile fracture behaviour of engineered cementitious composites , 2016 .

[46]  S. Mohammadi,et al.  Multiscale dynamic fracture behavior of the carbon nanotube reinforced concrete under impact loading , 2016 .