SILICON ROUGHNESS INDUCED BY PLASMA ETCHING

A parametric study of single‐crystal silicon roughness induced by an SF6 plasma has been carried out by means of atomic force microscopy. An helicon source (also called resonant inductive plasma etcher) has been used to study the relation between plasma parameters and subsequent surface damage. The surface damage has been examined in terms of height roughness analysis and in terms of spatial (lateral) extent of the surface roughness. The central result is that roughness scales with the ratio of the ion flux over the reactive neutral flux (J+/JF), showing the combined role of both ionic and neutral species. At low ion flux, the neutrals smooth the surface, while at higher ion flux, they propagate the ion‐induced defects, allowing the roughness to be enhanced. Influences of other parameters such as exposure duration, ion energy, or substrate temperature have also been quantified. It is shown that the roughness growth is well described by an empirical law: rms∝(1/√E)(J+/JF)ηtβ, with η≊0.45 and β≊1 (rms is th...

[1]  Gottlieb S. Oehrlein,et al.  Dry etching damage of silicon: A review , 1989 .

[2]  J. Dieleman,et al.  Chemical sputtering of Si related to roughness formation of a Cl‐passivated Si surface , 1993 .

[3]  Jerry Tersoff,et al.  Scanning tunneling microscopy , 1987 .

[4]  Tokuo Kure,et al.  Low‐temperature dry etching , 1991 .

[5]  R. Boswell,et al.  Fast anisotropic etching of silicon in an inductively coupled plasma reactor , 1989 .

[6]  P. Zalm,et al.  Energy dependence of the sputtering yield of silicon bombarded with neon, argon, krypton, and xenon ions , 1983 .

[7]  Eklund,et al.  Submicron-scale surface roughening induced by ion bombardment. , 1991, Physical review letters.

[8]  Francis F. Chen,et al.  Plasma ionization by helicon waves , 1991 .

[9]  P. Brault.  Fluorine diffusion in silicon under plasma treatment , 1991 .

[10]  C. Charles,et al.  Plasma diffusion from a low pressure radio frequency source , 1991 .

[11]  R. A. Barker,et al.  Simulation of plasma‐assisted etching processes by ion‐beam techniques , 1982 .

[12]  P. Brault,et al.  In situ Raman spectroscopy of silicon surfaces during SF6 plasma etching , 1994 .

[13]  G. M. Gallatin,et al.  Unified approach to the temporal evolution of surface profiles in solid etch and deposition processes , 1989 .

[14]  N. Itoh,et al.  A semiempirical formula for the energy dependence of the sputtering yield , 1981 .

[15]  O. Vatel,et al.  Quantitative Microroughness Analysis down to the Nanometer Scale , 1993 .

[16]  N. Sadeghi,et al.  Tungsten etching mechanisms in low‐pressure SF6 plasma , 1992 .

[17]  Emad Zawaideh,et al.  A generalized plasma etching model , 1988 .

[18]  S. Ohtani,et al.  Measurement of the Growth of Oxide Layers on Metals by Low-Energy Electron Spectroscopy: Aluminum , 1972 .

[19]  D. C. Gray,et al.  Phenomenological modeling of ion‐enhanced surface kinetics in fluorine‐based plasma etching , 1993 .

[20]  R. Williams,et al.  Correlation from randomness: quantitative analysis of ion-etched graphite surfaces using the scanning tunneling microscope , 1993 .

[21]  E. Irene,et al.  In situ spectroscopic ellipsometric investigation of argon ion bombardment of single-crystal silicon and silicon dioxide films , 1991 .