Centrifugal Compressor Performance Improvements Through Impeller Splitter Location

[1]  R. Amano,et al.  Empirical Design Considerations for Industrial Centrifugal Compressors , 2012 .

[2]  C. Xu,et al.  Numerical Predication of Swept Blade Aerodynamic Effects , 2004 .

[3]  C Xu.  Design Experience and Considerations for Centrifugal Compressor Development , 2007 .

[4]  H. Hattori,et al.  Computational Fluid Dynamics Study for Improvement of Prediction of Various Thermally Stratified Turbulent Boundary Layers , 2017 .

[5]  Cheng Xu,et al.  Computational Analysis of Swept Compressor Rotor Blades , 2008 .

[6]  Cheng Xu,et al.  Computational Analysis of Scroll Tongue Shapes to Compressor Performance by Using Different Turbulence Models , 2007 .

[7]  Michael Müller,et al.  Development and Design of a Centrifugal Compressor Volute , 2005 .

[8]  M. Zangeneh,et al.  On 3D Inverse Design of Centrifugal Compressor Impellers With Splitter Blades , 1998 .

[9]  C. Xu,et al.  A Study of a Single Stage Centrifugal Compressor , 2006 .

[10]  Cheng Xu,et al.  Development of a Low Flow Coefficient Single Stage Centrifugal Compressor , 2009 .

[11]  Li Wang,et al.  Exergy Analysis for Air Separation Process Under Off-Design Conditions , 2015 .

[12]  Nemat Kasaeian,et al.  Optimization, Numerical, and Experimental Study of a Propeller Pump as Turbine , 2014 .

[13]  Ryoichi S. Amano,et al.  Improvement of aerodynamic performance of cambered airfoils using leading edge slots , 2017 .

[14]  Ryoichi S. Amano,et al.  Study of the Flow in Centrifugal Compressor , 2010 .

[15]  Cheng Xu,et al.  On the Development of Turbomachine Blade Aerodynamic Design System , 2009 .

[16]  C. Xu,et al.  The Development of High Performance Centrifugal Compressor Using CFD and Other Considerations , 2017 .

[17]  R. Amano,et al.  Meridional Considerations of the Centrifugal Compressor Development , 2012 .

[18]  S Kim,et al.  A numerical study of the effects of blade angle distribution on the performance and loss generation of centrifugal compressor impellers , 2012 .

[19]  Manuel Toledano-Ayala,et al.  Optimizing Wind Turbine Efficiency by Deformable Structures in Smart Blades , 2015 .

[20]  R. S. Amano,et al.  Computational analysis of pitch-width effects on the secondary flows of turbine blades , 2004 .

[21]  D. Japikse.  Centrifugal compressor design and performance , 1996 .

[22]  Cheng Xu,et al.  The Development of a Centrifugal Compressor Impeller , 2009 .

[23]  A. Grönman,et al.  Effects of Different Blade Angle Distributions on Centrifugal Compressor Performance , 2009 .