Practical Application of the Wave-Trap Concept in Battery–Cell Equalizers

The use of battery-cell equalizers is mandatory in order to assure that all the cells connected in series are charged to its maximum capacity, even when they present small differences in this parameter due to several factors, such as aging, manufacturing, or temperature. Active equalizers, with a higher efficiency in comparison to passive ones, have the disadvantage of using a considerable number of components. Moreover, in the case of active equalizers with very high performance, this number can be even higher. In this paper, the use of the wave-trap concept, widely used in telecommunication systems, is studied. This concept allows the battery-cell equalizer to use its switching frequency as the control variable that decides which cell is being charged. Hence, it is not necessary to use a complex system based on a high number of controlled switches in order to determine which cell is being charged. In this way, the number of switches (and the corresponding driving signals) can be strongly minimized without reducing the performance of the system. In order to proof the validity of this concept (i.e., wave traps) in the design of battery-cell equalizers, a topology based on a half-bridge structure is also proposed in this paper. It uses only two controlled switches in order to decide which cell is charged. Experimental results are provided for a four-cell equalizer as a proof of concept.

[1]  Praveen Jain,et al.  Asymmetrical Pulse-Width-Modulated , 1996 .

[2]  Praveen Jain,et al.  Asymmetrical pulse width modulated resonant DC/DC converter topologies , 1993 .

[3]  K. W. E. Cheng,et al.  Zero-Current Switching Switched-Capacitor Zero-Voltage-Gap Automatic Equalization System for Series Battery String , 2012, IEEE Transactions on Power Electronics.

[4]  A.M. Khambadkone,et al.  A 1-MHz Zero-Voltage-Switching Asymmetrical Half-Bridge DC/DC Converter: Analysis and Design , 2006, IEEE Transactions on Power Electronics.

[5]  Sheldon S. Williamson,et al.  Design, Testing, and Validation of a Simplified Control Scheme for a Novel Plug-In Hybrid Electric Vehicle Battery Cell Equalizer , 2010, IEEE Transactions on Industrial Electronics.

[6]  John Batchelor,et al.  Dual patches microstrip fed antenna with wide bandwidth , 2009, 2009 Loughborough Antennas & Propagation Conference.

[7]  Christian Kral,et al.  A Current Equalization Method for Serially Connected Battery Cells Using a Single Power Converter for Each Cell , 2011, IEEE Transactions on Vehicular Technology.

[8]  J.-L. Wu,et al.  Class-E-based charge-equalisation circuit for battery cells , 2012 .

[9]  Marian K. Kazimierczuk,et al.  Analysis of class E low di/dt rectifier with a series inductor , 1993 .

[10]  Phua Chee Heng,et al.  Soft-switched DC/DC converter with PWM control , 1993, Proceedings of Intelec 93: 15th International Telecommunications Energy Conference.

[11]  Donald W. Novotny,et al.  Design considerations for charge equalization of an electric vehicle battery system , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[12]  Gun-Woo Moon,et al.  A Modularized Charge Equalizer for an HEV Lithium-Ion Battery String , 2009, IEEE Transactions on Industrial Electronics.

[13]  Wei Zhu,et al.  Fast equalization for large lithium ion batteries , 2009, IEEE Aerospace and Electronic Systems Magazine.

[14]  Markus Einhorn,et al.  Improved Performance of Serially Connected Li-Ion Batteries With Active Cell Balancing in Electric Vehicles , 2011, IEEE Transactions on Vehicular Technology.

[15]  Tsorng-Juu Liang,et al.  A Novel High-Efficiency Compact-Size Low-Cost Balancing Method for Series-Connected Battery Applications , 2013, IEEE Transactions on Power Electronics.

[16]  Hideaki Fujita,et al.  A resonant switched-capacitor converter for voltage balancing of series-connected capacitors , 2009, 2009 International Conference on Power Electronics and Drive Systems (PEDS).

[17]  Gun-Woo Moon,et al.  Single-Magnetic Cell-to-Cell Charge Equalization Converter With Reduced Number of Transformer Windings , 2012, IEEE Transactions on Power Electronics.

[18]  Moon-Young Kim,et al.  A Modularized Two-Stage Charge Equalizer With Cell Selection Switches for Series-Connected Lithium-Ion Battery String in an HEV , 2012, IEEE Transactions on Power Electronics.

[19]  M. Arias,et al.  High-Efficiency Asymmetrical Half-Bridge Converter Without Electrolytic Capacitor for Low-Output-Voltage AC–DC LED Drivers , 2013, IEEE Transactions on Power Electronics.

[20]  Rae-Young Kim,et al.  Low cost multiple zero voltage/zero current switching battery equalization circuit with single soft-switching resonant cell , 2012, 2012 IEEE Vehicle Power and Propulsion Conference.

[21]  F.C. Lee,et al.  A Novel Driving Scheme for Synchronous Rectifiers in LLC Resonant Converters , 2009, IEEE Transactions on Power Electronics.

[22]  Kamon Jirasereeamornkul,et al.  High efficiency battery management system for serially connected battery string , 2009, 2009 IEEE International Symposium on Industrial Electronics.

[23]  Philip T. Krein,et al.  Switched capacitor system for automatic series battery equalization , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[24]  Siqi Li,et al.  A High-Efficiency Active Battery-Balancing Circuit Using Multiwinding Transformer , 2013, IEEE Transactions on Industry Applications.

[25]  C. Kral,et al.  Comparison, Selection, and Parameterization of Electrical Battery Models for Automotive Applications , 2013, IEEE Transactions on Power Electronics.

[26]  V.L. Teofilo,et al.  Advanced lithium ion battery charger , 1997, Fifteenth Annual Battery Conference on Applications and Advances (Cat. No.00TH8490).

[27]  Donald W. Novotny,et al.  Charge equalization for series connected battery strings , 1994 .

[28]  Xuezhe Wei,et al.  The research of vehicle power Li-ion battery pack balancing method , 2009, 2009 9th International Conference on Electronic Measurement & Instruments.

[29]  Jung-Ik Ha,et al.  Cell balancing control using adjusted filters in flyback converter with single switch , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[30]  A. Emadi,et al.  Battery balancing methods: A comprehensive review , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[31]  Masatoshi Uno,et al.  Single-Switch Cell Voltage Equalizer Using Multistacked Buck-Boost Converters Operating in Discontinuous Conduction Mode for Series-Connected Energy Storage Cells , 2011, IEEE Transactions on Vehicular Technology.

[32]  Gun-Woo Moon,et al.  A New Buck-boost Type Battery Equalizer , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[33]  Mehdi Ferdowsi,et al.  Double-Tiered Switched-Capacitor Battery Charge Equalization Technique , 2008, IEEE Transactions on Industrial Electronics.

[34]  G.-Y. Jeong.  High efficiency asymmetrical half-bridge converter using a self-driven synchronous rectifier , 2008 .

[35]  G Fiengo,et al.  Cell equalization in battery stacks through State Of Charge estimation polling , 2010, Proceedings of the 2010 American Control Conference.

[36]  Paolo Mattavelli,et al.  A Universal Adaptive Driving Scheme for Synchronous Rectification in LLC Resonant Converters , 2012, IEEE Transactions on Power Electronics.

[37]  Roberto Roncella,et al.  High-Efficiency Digitally Controlled Charge Equalizer for Series-Connected Cells Based on Switching Converter and Super-Capacitor , 2013, IEEE Transactions on Industrial Informatics.

[38]  Faisal H. Khan,et al.  A low-cost time shared cell balancing technique for future lithium-ion battery storage system featuring regenerative energy distribution , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[39]  Jean-Christophe Crebier,et al.  Optimized structure for next-to-next balancing of series-connected lithium-ion cells , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[40]  Javier Sebastian,et al.  Small-Signal and Large-Signal Analysis of the Two-Transformer Asymmetrical Half-Bridge Converter Operating in Continuous Conduction Mode , 2014, IEEE Transactions on Power Electronics.

[41]  Bo-Hyung Cho,et al.  Selective flyback balancing circuit with improved balancing speed for series connected Lithium-ion batteries , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[42]  J M Henry,et al.  Practical Performance Analysis of Complex Switched-Capacitor Converters , 2011, IEEE Transactions on Power Electronics.

[43]  Juan C. Vasquez,et al.  State-of-Charge Balance Using Adaptive Droop Control for Distributed Energy Storage Systems in DC Microgrid Applications , 2014, IEEE Transactions on Industrial Electronics.

[44]  Hideo Sakamoto,et al.  A PWM controlled simple and high performance battery balancing system , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[45]  Yuang-Shung Lee,et al.  Intelligent control battery equalization for series connected lithium-ion battery strings , 2005, IEEE Trans. Ind. Electron..

[46]  Joeri Van Mierlo,et al.  Passive and active battery balancing comparison based on MATLAB simulation , 2011, 2011 IEEE Vehicle Power and Propulsion Conference.

[47]  D. G. Lamar,et al.  Design of a Soft-Switching Asymmetrical Half-Bridge Converter as Second Stage of an LED Driver for Street Lighting Application , 2012, IEEE Transactions on Power Electronics.

[48]  Le Yi Wang,et al.  Integrated System Identification and State-of-Charge Estimation of Battery Systems , 2013, IEEE Transactions on Energy Conversion.

[49]  Moon-Young Kim,et al.  A Modularized Charge Equalizer Using a Battery Monitoring IC for Series-Connected Li-Ion Battery Strings in Electric Vehicles , 2013, IEEE Transactions on Power Electronics.