Wet etching and chemical polishing of InAs/GaSb superlattice photodiodes

In this paper, we studied wet chemical etching fabrication of the InAs/GaSb superlattice mesa photodiode for the mid-infrared region. The details of the wet chemical etchants used for the device process are presented. The etching solution is based on orthophosphoric acid (H3PO4), citric acid (C6H8O7) and H2O2, followed by chemical polishing with the sodium hypochlorite (NaClO) solution and protection with photoresist polymerized. The photodiode performance is evaluated by current?voltage measurements. The zero-bias resistance area product R0A above 4 ? 105 ? cm2 at 77 K is reported. The device did not show dark current degradation at 77 K after exposition during 3 weeks to the ambient air.

[1]  S. Chuang,et al.  Surface channel current in InAs∕GaSb type-II superlattice photodiodes , 2007 .

[2]  Yajun Wei,et al.  High-performance type-II InAs/GaSb superlattice photodiodes with cutoff wavelength around 7 μm , 2005 .

[3]  Manijeh Razeghi,et al.  On the performance and surface passivation of type II InAs∕GaSb superlattice photodiodes for the very-long-wavelength infrared , 2005 .

[4]  Release of Epitaxial Layers Grown on InAs Substrates , 2003 .

[5]  Martin Walther,et al.  Passivation of InAs∕(GaIn)Sb short-period superlattice photodiodes with 10μm cutoff wavelength by epitaxial overgrowth with AlxGa1−xAsySb1−y , 2005 .

[6]  P. Dutta,et al.  Fabrication and passivation of GaSb photodiodes , 2008 .

[7]  C. Bozada,et al.  Citric Acid Etching of GaAs1 − x Sb x , Al0.5Ga0.5Sb , and InAs for Heterostructure Device Fabrication , 1994 .

[8]  I. A. Andreev,et al.  Sulfide passivation of GaSb/GaInAsSb/GaAlAsSb photodiode heterostructures , 1997 .

[9]  Markus-Christian Amann,et al.  Selective and non-selective wet-chemical etchants for GaSb-based materials , 2004 .

[10]  X. Zhang,et al.  The effects of (NH4)2S passivation treatments on the dark current–voltage characteristics of InGaAsSb PIN detectors , 2003 .

[11]  Partha S. Dutta,et al.  Surface passivation and capping of GaSb photodiode by chemical bath deposition of CdS , 2006 .

[12]  Jian V. Li,et al.  Surface recombination velocity reduction in type-II InAs/GaSb superlattice photodiodes due to ammonium sulfide passivation , 2007 .

[13]  J. Long,et al.  Surface passivation of InAs(001) with thioacetamide , 2005 .

[14]  Piotr Martyniuk,et al.  InAs/GaInSb superlattices as a promising material system for third generation infrared detectors , 2006 .

[15]  H. S. Kim,et al.  Type II InAs∕GaSb strain layer superlattice detectors with p-on-n polarity , 2007 .

[16]  Yajun Wei,et al.  Near bulk-limited R0A of long-wavelength infrared type-II InAs/GaSb superlattice photodiodes with polyimide surface passivation , 2007 .

[17]  J. B. Rodriguez,et al.  MBE growth and characterization of type-II InAs/GaSb superlattices for mid-infrared detection , 2005 .

[18]  Max I. Robertson,et al.  Halogen etching of group 13–15 (3–5) semiconductors and its relevance to chemical–mechanical polishing. The reactions of dibromine, dichlorine and sodium hypochlorite with gallium arsenide and related materials , 1997 .

[19]  Lloyd J. Whitman,et al.  Chemical and electronic properties of sulfur-passivated InAs surfaces , 2003 .

[20]  J. Ziegler,et al.  InAs/GaSb superlattice focal plane arrays for high-resolution thermal imaging , 2006 .

[21]  E. Papis,et al.  Sulfide treatment of GaSb surface: influence on the LPE growth of InGaAsSb/AlGaAsSb heterostructures , 2000 .

[22]  B. Lambert,et al.  Passivation of GaSb by sulfur treatment , 1994 .

[23]  M. Kumagawa,et al.  Sulphur passivation of InAs(Sb) , 1997 .

[24]  Yajun Wei,et al.  Ammonium sulfide passivation of Type-II InAs/GaSb superlattice photodiodes , 2004 .

[25]  Philippe Christol,et al.  Surface passivation of GaInAsSb photodiodes with thioacetamide , 2007 .

[26]  Guanqun Xia,et al.  Sulfur-passivation mechanism analysis of GaInAsSb photodetectors , 2003 .

[27]  Yajun Wei,et al.  Passivation of type-II InAs∕GaSb double heterostructure , 2007 .

[28]  Binhe Wu,et al.  Sulphur passivation of the InGaAsSb/GaSb photodiodes , 2002 .

[29]  Manijeh Razeghi,et al.  Surface leakage reduction in narrow band gap type-II antimonide-based superlattice photodiodes , 2009 .

[30]  T. Kuech,et al.  A comparative study of GaSb (100) surface passivation by aqueous and nonaqueous solutions , 2003 .

[31]  Oleg V. Sulima,et al.  Passivation of AlGaAsSb∕InGaAsSb∕GaSb photodiodes using aqueous (NH4)2S solution and polyimide encapsulation , 2005 .

[32]  Yajun Wei,et al.  Passivation of type II InAs/GaSb superlattice photodiodes , 2003 .

[33]  J. Szade,et al.  Sulphur passivation of GaSb, InGaAsSb and AlGaAsSb surfaces , 2007 .

[34]  Sang Jun Lee,et al.  Electrochemical sulphur passivation of InAs/GaSb strain layer superlattice detectors , 2006 .

[35]  T. C. Mcgill,et al.  Nitridation of epitaxially grown 6.1 Å semiconductors studied by X-ray photoelectron spectroscopy , 2004 .