An integrated framework for the design of material flow systems

Material flow is a significant factor in the design of manufacturing systems. The designer of a material flow system is faced not only with the specification of individual system components but also with the overall objective of the manufacturing system. The association between components and the interaction of the material flow system with the manufacturing system are the basis by which its performance is judged. A material flow system design may be optimal in itself, but if the design cannot be integrated into the overall manufacturing system, it may have a negative impact on the manufacturing system performance. Therefore, the designer is expected to analyse the role of each component as a part of the total system and consider its influence on the overall system performance.

[1]  Averill M. Law,et al.  Selecting simulation software for manufacturing applications: practical guidelines & software survey , 1989 .

[2]  D. L. Kimbler,et al.  Assignement of AGVS with different vehicle types , 1987 .

[3]  Raymond A. Kulwiec.  Materials Handling Handbook , 1985 .

[4]  John R. Bourne,et al.  Building expert systems for repair domains , 1986 .

[5]  Tom McCusker,et al.  SynOptics Communications Inc. , 1993 .

[6]  R. L. Keeney,et al.  Decisions with Multiple Objectives: Preferences and Value Trade-Offs , 1977, IEEE Transactions on Systems, Man, and Cybernetics.

[7]  Bernard J. Schroer,et al.  A Simulation Assistant for Modeling Manufacturing Systems , 1989, Simul..

[8]  J. Talavage,et al.  A knowledge-based design assistant for intelligent manufacturing systems , 1990 .

[9]  Averill M. Law,et al.  Simulation Modeling and Analysis , 1982 .

[10]  Ludo Gelders,et al.  Micro-computer simulation in design of automated guided vehicle systems , 1985 .

[11]  David Sinriech,et al.  OSL—optimal single-loop guide paths for AGVS , 1992 .

[12]  Robert Sedgewick,et al.  Algorithms in C , 1990 .

[13]  Joe W. Duran,et al.  A General Expert System Design for Diagnostic Problem Solving , 1984, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[14]  D. Sriram,et al.  Applications of Artificial Intelligence in Engineering Problems , 1986 .

[15]  Robert Wright,et al.  Systems Thinking: A Guide to Managing in a Changing Environment , 1989 .

[16]  Tien-Chien Chang,et al.  An approach to object-oriented discrete-event simulation of manufacturing systems , 1991, 1991 Winter Simulation Conference Proceedings..

[17]  Norbert Giambiasi,et al.  DeBuMA: Description, Building and Management of Applications , 1989, 26th ACM/IEEE Design Automation Conference.

[18]  J. M. A. Tanchoco,et al.  Selecting and sequencing design tools in developing material flow system models , 1994 .

[19]  Stephen Wolfram,et al.  Mathematica: a system for doing mathematics by computer (2nd ed.) , 1991 .

[20]  James J. Solberg,et al.  Capacity Planning with a Stochastic Workflow Model , 1981 .

[21]  Gunter P. Sharp,et al.  An analytical method for configuring fixed-path, closed-loop material handling systems† , 1990 .

[22]  Richard K. Miller.  Automated Guided Vehicle Systems , 1983 .

[23]  Rajan Suri,et al.  Modelling flexible manufacturing systems using mean-value analysis , 1984 .

[24]  E. V. Krishnamurthy,et al.  Parallel processing - principles and practice , 1989, International computer science series.

[25]  Yavuz A. Bozer,et al.  Tandem AGV systems: A partitioning algorithm and performance comparison with conventional AGV systems , 1992 .

[26]  George J. Ritz.  Total engineering project management , 1990 .

[27]  J. M. A. Tanchoco,et al.  Flow path design for automated guided vehicle systems , 1987 .

[28]  Peter C. Fishburn,et al.  Independence in Utility Theory with Whole Product Sets , 1965 .

[29]  D. E. Bell,et al.  Conflicting Objectives in Decisions , 1978 .

[30]  Joseph Talavage.  Flexible Manufacturing Systems in Practice , 1987 .

[31]  Pius J. Egbelu,et al.  Use of spread sheet analysis for evaluating AGV systems , 1987 .

[32]  William L. Maxwell,et al.  Design of Automatic Guided Vehicle Systems , 1982 .

[33]  Jack Mostow,et al.  Toward Better Models of the Design Process , 1985, AI Mag..

[34]  Deborah A. Mitta.  A Methodology for Quantifying Expert System Usability , 1991 .

[35]  A. Alan B. Pritsker.  Introduction to simulation and SLAM II (2nd ed.) , 1984 .

[36]  J. M. A. Tanchoco,et al.  A LISP-based controller for free-ranging automated guided vehicle systems , 1988 .

[37]  Pius J. Egbelu,et al.  Determination of the total number of vehicles in an AGV-based material transport system , 1987 .

[38]  Edward L. Fisher.  An AI-Based Methodology for Factory Design , 1986, AI Mag..

[39]  J. Milberg,et al.  Flexible Regelung der Produktion mit entscheidungsunterstützenden Systemen , 1992 .

[40]  R. D. Hurrion.  Simulation: Applications in Manufacturing , 1986 .

[41]  Andrew Kusiak.  Modelling and design of flexible manufacturing systems , 1986 .

[42]  W. Edwards.  How to Use Multi-Attribute Utility Measurement for Social Decision Making , 1976 .

[43]  Paul R. Cohen,et al.  An Architecture for Application of Artificial Intelligence to Design , 1984, 21st Design Automation Conference Proceedings.

[44]  T. T. Narendran,et al.  Design of an automated guided vehicle-based material handling system for a flexible manufacturing system , 1990 .

[45]  M. Schönheit,et al.  Flexible Fertigung. Fachgebiete in Jahresuebersichten. , 1990 .

[46]  William H. Middendorf,et al.  Design of Devices and Systems , 1986, IEEE Transactions on Reliability.

[47]  Stephen W. Director,et al.  An Object Oriented Approach to CAD Tool Control within a Design Framework , 1989, 26th ACM/IEEE Design Automation Conference.

[48]  Shimon Y. Nof,et al.  Advanced Information Technologies for Industrial Material Flow Systems , 2011, NATO ASI Series.

[49]  Hal Shubin,et al.  IDT: An Intelligent Diagnostic Tool , 1982, AAAI.

[50]  John K. Siu,et al.  MAKING TRADE-OFFS* , 1974 .

[51]  Spyros G. Tzafestas.  A Look at the Knowledge-Based Approach to System Fault Diagnosis and Supervisory Control , 1987 .

[52]  A. Alan B. Pritsker,et al.  Introduction to simulation and SLAM II , 1979 .

[53]  Lewis Brentano.  Distributed CAD/CAM: Myth and Reality , 1984, IEEE Computer Graphics and Applications.

[54]  J. M. A. Tanchoco,et al.  A modular framework for the design of material flow systems , 1994 .

[55]  Leon F. McGinnis,et al.  Computer-Aided Facility Design Revisited: A Prototype Design Workstation for AGV Systems , 1991 .

[56]  J. M. A. Tanchoco,et al.  AGVSim2-a development tool for AGVS controller design , 1989 .

[57]  Gerald T. Mackulak.  High level planning and control: An IDEF0 analysis for airframe manufacture , 1984 .

[58]  J. Tanchoco,et al.  Optimal flow path design of unidirectional AGV systems , 1990 .

[59]  M. Schönheit,et al.  Flexible Fertigungssysteme für mittelständische Unternehmen. Der «Systemarchitekt» unterstützt bei der Konzeption, der Koordination und der Abnahme , 1990 .

[60]  Thomas Muller.  Automated guided vehicles , 1983 .

[61]  Lewis J. Pinson,et al.  Applications of Object Oriented Programming , 1990 .

[62]  U. Lesch.  FFS-Planer. PC-gestützte graphische Werkstückanalyse liefert die Grunddaten für die Planung Flexiber Fertigungssysteme , 1990 .

[63]  Grady Booch,et al.  Object-Oriented Design with Applications , 1990 .

[64]  James J. Solberg,et al.  Managing Information Complexity in Material Flow Systems , 1989 .

[65]  P. J. Egbelu,et al.  The use of non-simulation approaches in estimating vehicle requirements in an automated guided based transport system , 1987 .

[66]  Edward Yourdon,et al.  Object-oriented analysis , 2012 .

[67]  Paul R. Cohen,et al.  Dominic: A Domain-Independent Program for Mechanical Engineering Design , 1986, Artif. Intell. Eng..

[68]  J. M. A. Tanchoco,et al.  Material flow system model evaluation and improvement , 1994 .

[69]  P. Fishburn.  Methods of Estimating Additive Utilities , 1967 .

[70]  Edward Yourdon,et al.  Object-oriented analysis (2nd ed.) , 1991 .

[71]  Lt. Col. Lawrence R. st. John.  Trends in logistics , 1954 .

[72]  Pius J. Egbelu,et al.  Characterization of automatic guided vehicle dispatching rules , 1984 .