Behaviour of axially loaded RC columns strengthened by steel angles and strips

This paper presents the development of some numerical models based on the results of laboratory tests performed on axially loaded RC columns strengthened with steel angles and strips. These numerical models consider the nonlinearity of the building materials and the effects of the contact interfaces between different materials. The results of the finite element models accurately describe the general behaviour of the strengthened columns. This study allows engineers to assess the relative importance of the mechanisms acting on the strengthened RC columns. Constructive recommendations are also provided in this paper.

[1]  Dennis Lam,et al.  Behaviour of normal and high strength concrete-filled compact steel tube circular stub columns , 2006 .

[2]  Giacomo Cerisola,et al.  Influence of organic coatings on the stability of macrodefect-free cements exposed to water , 2001 .

[3]  A. Mirmiran,et al.  Nonlinear finite element modeling of concrete confined by fiber composites , 2000 .

[4]  M. S. Kumar,et al.  Experimental and computational study of concrete filled steel tubular columns under axial loads , 2007 .

[5]  Ahmet Yakut,et al.  Drift based damage functions for reinforced concrete columns , 2004 .

[6]  Mathias Johansson,et al.  Finite element study of concrete-filled steel tubes using a new confinement-sensitive concrete compression model , 2001 .

[7]  Ehab Ellobody,et al.  Design and behaviour of concrete-filled cold-formed stainless steel tube columns , 2006 .

[8]  L. Cirtek,et al.  RC columns strengthened with bandage — experimental programme and design recommendations , 2001 .

[9]  JoséL. Ramírez,et al.  Ten concrete column repair methods , 1996 .

[10]  Tao Liu,et al.  Fundamental Principles That Govern Retrofitting of Reinforced Concrete Columns by Steel and FRP Jacketing , 2006 .

[11]  Shoichi Inoue,et al.  STRENGTHENING EFFECTS OF CONCRETE COLUMN WITH CARBON FIBER SHEET , 2000 .

[12]  A. Gjelsvik,et al.  Coefficient of Friction for Steel on Concrete at High Normal Stress , 1990 .

[13]  Jose M. Adam,et al.  A study of the conditions of use of a new safety system for the building industry , 2007 .

[14]  Hsuan-Teh Hu,et al.  Finite element analysis of CFT columns subjected to an axial compressive force and bending moment in combination , 2005 .