Clearance and manufacturing errors' effects on the accuracy of the 3-RCC Spherical Parallel Manipulator

[1]  Clément Gosselin,et al.  On the development of the Agile Eye , 1996, IEEE Robotics Autom. Mag..

[2]  Pierre Bourdet,et al.  A Computation Method for the Consequences of Geometric Errors in Mechanisms , 1998 .

[3]  Jorge Ambrósio,et al.  Revolute joints with clearance in multibody systems , 2004 .

[4]  Ming-June Tsai,et al.  Kinematic sensitivity analysis of linkage with joint clearance based on transmission quality , 2004 .

[5]  Singiresu S Rao,et al.  Interval Approach for the Modeling of Tolerances and Clearances in Mechanism Analysis , 2004 .

[6]  Bernard Anselmetti,et al.  Generation of manufacturing tolerancing with ISO standards , 2005 .

[7]  V. Parenti-Castelli,et al.  A New Technique for Clearance Influence Analysis in Spatial Mechanisms , 2005 .

[8]  Jorge Ambrósio,et al.  A study on dynamics of mechanical systems including joints with clearance and lubrication , 2006 .

[9]  Sébastien Briot,et al.  A Pair of Measures of Rotational Error for Axisymmetric Robot End-Effectors , 2008 .

[10]  Ilian A. Bonev,et al.  Geometric approach to the accuracy analysis of a class of 3-DOF planar parallel robots , 2008 .

[11]  Ming-June Tsai,et al.  Accuracy analysis of a multi-loop linkage with joint clearances , 2008 .

[12]  Zouhaier Affi,et al.  Prediction of the pose errors produced by joints clearance for a 3-UPU parallel robot , 2009 .

[13]  S. Bai.  Optimum design of spherical parallel manipulators for a prescribed workspace , 2010 .

[14]  Stéphane Caro,et al.  Sensitivity comparison of planar parallel manipulators , 2010 .

[15]  Jorge Angeles,et al.  The robust design of parallel spherical robots , 2011 .

[16]  M. Bergamasco,et al.  A new screw theory method for the estimation of position accuracy in spatial parallel manipulators with revolute joint clearances , 2011 .

[17]  P. Wenger,et al.  Comparison of 3-RPR planar parallel manipulators with regard to their kinetostatic performance and sensitivity to geometric uncertainties , 2011 .