Study of passive film on stainless steels and high grade nickel base alloy using X-ray photoelectron spectroscopy

Abstract In the present study an assessment has been made of the air formed passive film and the passive film existing after a short exposure to a synthetic sea water environment on austenitic (UNS S31603), superaustenitic (UNS S31254 and UNS S32654) and superduplex (UNS S32760) stainless steels and a Ni base alloy (UNS N06625) using X-ray photoelectron spectroscopy. Assessment of their corrosion behaviour has been made through use of electrochemical accelerated tests supported by post-test microscopy. The passive film on the Ni base (low Fe) UNS N06625 alloy is remarkably similar to those formed on the high Cr and Mo stainless steels. It has been demonstrated that the Fe/Cr ratio in the passive film is dependent on alloy composition and on the conditions to which the material has been exposed, and a general correlation between passive film constitution and corrosion resistance is evident.

[1]  A. Neville,et al.  Comparative study of stainless steel and related alloy corrosion in natural sea water , 1998 .

[2]  D. Costa,et al.  The role of thiosulfates in the pitting corrosion of Fe-17Cr alloys in neutral chloride solution: Electrochemical and XPS study , 1997 .

[3]  A. Neville,et al.  An assessment of the corrosion behaviour of high-grade alloys in seawater at elevated temperature and under a high velocity impinging flow , 1996 .

[4]  M. Nagumo,et al.  The effect of chromium enrichment in the film formed by surface treatments on the corrosion resistance of type 430 stainless steel , 1996 .

[5]  C. Clayton,et al.  Influence of Nitrogen on Electrochemical Passivation of High-Nickel Stainless Steels and Thin Molybdenum-Nickel Films , 1996 .

[6]  C. Olsson The influence of nitrogen and molybdenum on passive films formed on the austenoferritic stainless steel 2205 studied by AES and XPS , 1995 .

[7]  A. Neville An investigation of the corrosion behaviour of a range of engineering materials in marine environments , 1995 .

[8]  J. Yu,et al.  Corrosion fatigue resistances of surgical implant stainless steels and titanium alloy , 1993 .

[9]  Ata M. Hassan,et al.  Corrosion resistant materials for seawater RO plants , 1989 .

[10]  G. Carolis,et al.  Cathodic Performance of Stainless Steels in Natural Seawater as a Function of Microorganism Settlement and Temperature , 1989 .

[11]  R. Ovarfort Critical pitting temperature measurements of stainless steels with an improved electrochemical method , 1989 .

[12]  S. Dexter,et al.  Effect of Seawater Biofilms on Corrosion Potential and Oxygen Reduction of Stainless Steel , 1988 .

[13]  G. Lorang,et al.  Quantitative Auger analysis of passive films formed on stainless steels , 1988 .

[14]  H. Strehblow Combined surface analytical and electrochemical studies for corrosion research , 1988 .

[15]  A. Atrens,et al.  ESCA-studies of the structure and composition of the passive film formed on stainless steels by various immersion times in 0.1 M NaCl solution , 1987 .

[16]  A. J. Sedriks Plenary Lecture—1986: Effects of Alloy Composition and Microstructure on the Passivity of Stainless Steels , 1986 .

[17]  A. Atrens,et al.  Corrosion of stainless steels in chloride solution: An XPS investigation of passive films , 1985 .

[18]  K. Sugimoto,et al.  Passive and transpassive films on FeCr alloys in acid and neutral solutions , 1980 .

[19]  J. Castle,et al.  The use of in the x-ray photo-electron spectroscopy analyses of passive layers on stainless steel , 1977 .