Multi-objective optimization of cutting conditions when turning aluminum alloys (1350-O and 7075-T6 grades) using genetic algorithm

[1]  Behnam Davoodi,et al.  Experimental investigation and optimization of cutting parameters in dry and wet machining of aluminum alloy 5083 in order to remove cutting fluid , 2014 .

[2]  Panagiotis Stavropoulos,et al.  Prediction of surface roughness magnitude in computer numerical controlled end milling processes using neural networks, by considering a set of influence parameters: An aluminium alloy 5083 case study , 2014 .

[3]  Domenico Umbrello,et al.  Numerical Simulation of Surface Modification in Dry and Cryogenic Machining of AA7075 Alloy , 2014 .

[4]  S. Liang,et al.  Effect of Temperature on the Subsurface Microstructure and Mechanical Properties of AA 7075-T6 in Machining , 2014 .

[5]  Victor Songmene,et al.  Investigation on surface finish and metallic particle emission during machining of aluminum alloys using response surface methodology and desirability functions , 2013 .

[6]  Ahmet Murat Pinar,et al.  Optimization of Process Parameters with Minimum Surface Roughness in the Pocket Machining of AA5083 Aluminum Alloy via Taguchi Method , 2013 .

[7]  T. Alwarsamy,et al.  Optimization of Machining Parameters for Aluminum and Silicon Carbide Composite Using Genetic Algorithm , 2012 .

[8]  S. Gündüz,et al.  The effects of aging on machinability of 6061 aluminium alloy , 2009 .

[9]  S. K. Sarangi,et al.  Machinability study of pure aluminium and Al–12% Si alloys against uncoated and coated carbide inserts , 2009 .

[10]  V. Songmene,et al.  A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys , 2009 .

[11]  Jin-feng Li,et al.  Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments , 2008 .

[12]  R. V. Kazban,et al.  Measurements of Forces and Temperature Fields in High-Speed Machining of 6061-T6 Aluminum Alloy , 2008 .

[13]  Masatsugu Kamiya,et al.  Role of second-phase particles in chip breakability in aluminum alloys , 2008 .

[14]  Toshiyuki Obikawa,et al.  Tools with built-in thin film thermocouple sensors for monitoring cutting temperature , 2007 .

[15]  F. Samuel,et al.  Effect of metallurgical parameters on the hardness and microstructural characterization of as-cast and heat-treated 356 and 319 aluminum alloys , 2007 .

[16]  F. Samuel,et al.  Effect of metallurgical parameters on the machinability of heat-treated 356 and 319 aluminum alloys , 2006 .

[17]  Jože Balič,et al.  An intelligent system for monitoring and optimization of ball-end milling process , 2006 .

[18]  R. Saravanan,et al.  Selection of optimal machining parameters for multi-tool milling operations using a memetic algorithm , 2006 .

[19]  A. Camacho,et al.  Surface roughness of AA7050 alloy turned bars Analysis of the influence of the length of machining , 2005 .

[20]  J. J. Mason,et al.  Experimental study of the temperature field generated during orthogonal machining of an aluminum alloy , 2002 .

[21]  J. M. González,et al.  Cutting forces compatibility based on a plasticity model.: Application to the oblique cutting of the AA2024 alloy , 2002 .

[22]  M. Cotterell,et al.  Minimal lubrication machining of aluminium alloys , 2002 .

[23]  Yung C. Shin,et al.  Analysis on high-speed face-milling of 7075-T6 aluminum using carbide and diamond cutters , 2001 .

[24]  Yoshio Ichida,et al.  A study on ultra–high-speed cutting of aluminium alloy:: Formation of welded metal on the secondary cutting edge of the tool and its effects on the quality of finished surface , 2000 .

[25]  Talat Lecture.  Structural Aluminium Materials , 2000 .

[26]  John W. Sutherland,et al.  Chip morphology and hole surface texture in the drilling of cast Aluminum alloys , 1998 .

[27]  Y. L. Abdel-Magid,et al.  Tuning of power system stabilizers using genetic algorithms , 1996 .

[28]  Donald E. Brown,et al.  Parallel genetic algorithms with local search , 1996, Comput. Oper. Res..

[29]  G. Boothroyd,et al.  Fundamentals of Metal Machining and Machine Tools , 1975 .

[30]  E. Degarmo.  Materials and Processes in Manufacturing , 1974 .