Accelerated start-up of two-chambered microbial fuel cells: Effect of anodic positive poised potential

Abstract The acclimation of anode-respiring bacteria (ARB) played a key role in starting up a microbial fuel cell (MFC). Conventionally, spontaneous colonization was employed in this process. Descript here is an investigation of decreasing the start-up time by applying an anodic positive poised potential. During start-up period, the maximal current output increased from 0.42 to 3 mA since the anode potential was poised at +200 mV versus Ag/AgCl, which was due to the increase of driving force of substrate oxidation. A higher voltage output and a lower charge transfer resistance analyzed by electrochemical impedance spectroscopy (EIS) were observed, showing that applied potential could increase the electrochemical activity of anodic microbiota during start-up period. The MFC with anodic positive poised potential need 35 days to obtain a similar current output in two consecutive circles, which was 24 days faster than that of the control MFC operated under 1000 Ω. When both MFCs were started up, no difference on performance was observed.

[1]  D. Lovley,et al.  Novel Mode of Microbial Energy Metabolism: Organic Carbon Oxidation Coupled to Dissimilatory Reduction of Iron or Manganese , 1988, Applied and environmental microbiology.

[2]  Byung Hong Kim,et al.  Direct electrode reaction of Fe(III)-reducing bacterium, Shewanella putrefaciens , 1999 .

[3]  T. Mehta,et al.  Extracellular electron transfer via microbial nanowires , 2005, Nature.

[4]  B. Logan,et al.  Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells. , 2007, Environmental science & technology.

[5]  W. Verstraete,et al.  A microbial fuel cell capable of converting glucose to electricity at high rate and efficiency , 2004, Biotechnology Letters.

[6]  Byung Hong Kim,et al.  Use of acetate for enrichment of electrochemically active microorganisms and their 16S rDNA analyses. , 2003, FEMS microbiology letters.

[7]  W. Verstraete,et al.  Biofuel Cells Select for Microbial Consortia That Self-Mediate Electron Transfer , 2004, Applied and Environmental Microbiology.

[8]  W. Verstraete,et al.  Continuous electricity generation at high voltages and currents using stacked microbial fuel cells. , 2006, Environmental science & technology.

[9]  D. R. Bond,et al.  Electricity Production by Geobacter sulfurreducens Attached to Electrodes , 2003, Applied and Environmental Microbiology.

[10]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[11]  Willy Verstraete,et al.  Microbial ecology meets electrochemistry: electricity-driven and driving communities , 2007, The ISME Journal.

[12]  Zhen He,et al.  An upflow microbial fuel cell with an interior cathode: assessment of the internal resistance by impedance spectroscopy. , 2006, Environmental science & technology.

[13]  Ray H. Baughman,et al.  Electrochemical Properties of Single-Wall Carbon Nanotube Electrodes , 2003 .

[14]  A. E. Greenberg,et al.  Standard methods for the examination of water and wastewater : supplement to the sixteenth edition , 1988 .

[15]  Qingliang Zhao,et al.  A microbial fuel cell using permanganate as the cathodic electron acceptor , 2006 .

[16]  U. Schröder.  Anodic electron transfer mechanisms in microbial fuel cells and their energy efficiency. , 2007, Physical chemistry chemical physics : PCCP.

[17]  A. Estéve-Núñez,et al.  Whole cell electrochemistry of electricity-producing microorganisms evidence an adaptation for optimal exocellular electron transport. , 2008, Environmental science & technology.

[18]  W. Verstraete,et al.  Microbial phenazine production enhances electron transfer in biofuel cells. , 2005, Environmental science & technology.

[19]  Alice Dohnalkova,et al.  Electrically conductive bacterial nanowires produced by Shewanella oneidensis strain MR-1 and other microorganisms. , 2006, Proceedings of the National Academy of Sciences of the United States of America.

[20]  Sheela Berchmans,et al.  Direct electron transfer with yeast cells and construction of a mediatorless microbial fuel cell. , 2007, Biosensors & bioelectronics.

[21]  Bruce E Logan,et al.  Cathode performance as a factor in electricity generation in microbial fuel cells. , 2004, Environmental science & technology.

[22]  Leonard M Tender,et al.  Effect of electrode potential on electrode-reducing microbiota. , 2006, Environmental science & technology.

[23]  B. Min,et al.  Electricity generation using membrane and salt bridge microbial fuel cells. , 2005, Water research.

[24]  Byung Hong Kim,et al.  A novel electrochemically active and Fe(III)-reducing bacterium phylogenetically related to Aeromonas hydrophila, isolated from a microbial fuel cell. , 2003, FEMS microbiology letters.

[25]  Zhiguo Yuan,et al.  Sequential anode-cathode configuration improves cathodic oxygen reduction and effluent quality of microbial fuel cells. , 2008, Water research.

[26]  Byung Hong Kim,et al.  Enrichment of microbial community generating electricity using a fuel-cell-type electrochemical cell , 2004, Applied Microbiology and Biotechnology.

[27]  Byung Hong Kim,et al.  Electrochemical activity of an Fe(III)-reducing bacterium, Shewanella putrefaciens IR-1, in the presence of alternative electron acceptors , 1999 .

[28]  D. Lovley,et al.  Electricity generation by direct oxidation of glucose in mediatorless microbial fuel cells , 2003, Nature Biotechnology.

[29]  Bruce E. Logan,et al.  AMMONIA TREATMENT OF CARBON CLOTH ANODES TO ENHANCE POWER GENERATION OF MICROBIAL FUEL CELLS , 2007 .

[30]  Willy Verstraete,et al.  The anode potential regulates bacterial activity in microbial fuel cells , 2008, Applied Microbiology and Biotechnology.