Reducing Energy Barrier of δ-to-α Phase Transition for Printed Formamidinium Lead Iodide Photovoltaic Devices

[1]  Jun Hee Lee,et al.  Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells , 2021, Nature.

[2]  Essa A. Alharbi,et al.  A combined molecular dynamics and experimental study of two-step process enabling low-temperature formation of phase-pure α-FAPbI3 , 2021, Science Advances.

[3]  Dong Yang,et al.  High-throughput large-area vacuum deposition for high-performance formamidine-based perovskite solar cells , 2021, Energy & Environmental Science.

[4]  P. Li,et al.  Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity , 2021, Science.

[5]  Wei Huang,et al.  Solvent Engineering of the Precursor Solution toward Large‐Area Production of Perovskite Solar Cells , 2021, Advanced materials.

[6]  L. Qiu,et al.  Scalable Fabrication of >90 cm2 Perovskite Solar Modules with >1000 h Operational Stability Based on the Intermediate Phase Strategy , 2021, Advanced Energy Materials.

[7]  Jinsong Huang,et al.  Iodine reduction for reproducible and high-performance perovskite solar cells and modules , 2021, Science Advances.

[8]  D. Abou‐Ras,et al.  Large-Grain Double Cation Perovskites with 18 μs Lifetime and High Luminescence Yield for Efficient Inverted Perovskite Solar Cells , 2021 .

[9]  Bo Li,et al.  Insights into iodoplumbate complex evolution of precursor solutions for perovskite solar cells: from aging to degradation , 2021 .

[10]  Liduo Wang,et al.  Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness , 2021, Nature Communications.

[11]  Phillip Lee,et al.  Foldable Perovskite Solar Cells Using Carbon Nanotube‐Embedded Ultrathin Polyimide Conductor , 2021, Advanced science.

[12]  Yiwang Chen,et al.  An in situ bifacial passivation strategy for flexible perovskite solar module with mechanical robustness by roll-to-roll fabrication , 2021, Journal of Materials Chemistry A.

[13]  Z. Ren,et al.  Printing High‐Efficiency Perovskite Solar Cells in High‐Humidity Ambient Environment—An In Situ Guided Investigation , 2021, Advanced science.

[14]  Paul E. Shaw,et al.  Engineering fluorinated-cation containing inverted perovskite solar cells with an efficiency of >21% and improved stability towards humidity , 2021, Nature Communications.

[15]  M. Toney,et al.  Crystallization in one-step solution deposition of perovskite films: Upward or downward? , 2021, Science Advances.

[16]  J. S. Francisco,et al.  Mechanism for Rapid Conversion of Amines to Ammonium Salts at the Air-Particle Interface. , 2020, Journal of the American Chemical Society.

[17]  C. Brabec,et al.  Controlling the crystallization dynamics of photovoltaic perovskite layers on larger-area coatings , 2020 .

[18]  N. Park,et al.  A Review on Scaling Up Perovskite Solar Cells , 2020, Advanced Functional Materials.

[19]  Barry P Rand,et al.  Device Performance of Emerging Photovoltaic Materials (Version 1) , 2020, Advanced Energy Materials.

[20]  A. Jen,et al.  Regulating Surface Termination for Efficient Inverted Perovskite Solar Cells with Greater Than 23% Efficiency. , 2020, Journal of the American Chemical Society.

[21]  Yana Vaynzof,et al.  The Future of Perovskite Photovoltaics—Thermal Evaporation or Solution Processing? , 2020, Advanced Energy Materials.

[22]  M. Abdi‐Jalebi,et al.  Recent progress in morphology optimization in perovskite solar cell , 2020, Journal of Materials Chemistry A.

[23]  Seong Sik Shin,et al.  Record-efficiency flexible perovskite solar cell and module enabled by a porous-planar structure as an electron transport layer , 2020 .

[24]  Sam Zhang.  Materials for Energy , 2020 .

[25]  U. Rothlisberger,et al.  Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells , 2020, Science.

[26]  C. Brabec,et al.  Rational Interface Design and Morphology Control for Blade‐Coating Efficient Flexible Perovskite Solar Cells with a Record Fill Factor of 81% , 2020, Advanced Functional Materials.

[27]  M. Haro,et al.  Perovskite solar cells take a step forward , 2020, Science.

[28]  Kwanghee Lee,et al.  Towards Efficient Integrated Perovskite/Organic Bulk Heterojunction Solar Cells: Interfacial Energetic Requirement to Reduce Charge Carrier Recombination Losses , 2020, Advanced Functional Materials.

[29]  C. Brabec,et al.  Spontaneously Self‐Assembly of a 2D/3D Heterostructure Enhances the Efficiency and Stability in Printed Perovskite Solar Cells , 2020, Advanced Energy Materials.

[30]  Min Gyu Kim,et al.  Unveiling the relationship between the perovskite precursor solution and the resulting device performance. , 2020, Journal of the American Chemical Society.

[31]  R. Munir,et al.  20.8% slot-die coated MAPbI3 perovskite solar cells by optimal DMSO-content and age of 2-ME based precursor inks , 2020 .

[32]  Hongwei Chen,et al.  Suppressing Vacancy Defects and Grain Boundaries via Ostwald Ripening for High‐Performance and Stable Perovskite Solar Cells , 2019, Advanced materials.

[33]  Jun Hee Lee,et al.  Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide , 2019, Science.

[34]  C. Brabec,et al.  A Generalized Crystallization Protocol for Scalable Deposition of High‐Quality Perovskite Thin Films for Photovoltaic Applications , 2019, Advanced science.

[35]  C. Brabec,et al.  Sequential Deposition of High‐Quality Photovoltaic Perovskite Layers via Scalable Printing Methods , 2019, Advanced Functional Materials.

[36]  Wei Chen,et al.  A chemically inert bismuth interlayer enhances long-term stability of inverted perovskite solar cells , 2019, Nature Communications.

[37]  Jay B. Patel,et al.  Unveiling the Influence of pH on the Crystallization of Hybrid Perovskites, Delivering Low Voltage Loss Photovoltaics , 2017 .

[38]  X. Ren,et al.  20‐mm‐Large Single‐Crystalline Formamidinium‐Perovskite Wafer for Mass Production of Integrated Photodetectors , 2016 .

[39]  Federico Bella,et al.  Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers , 2016, Science.

[40]  M. Yoon,et al.  Entropy-driven structural transition and kinetic trapping in formamidinium lead iodide perovskite , 2016, Science Advances.

[41]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[42]  M. Pouchard,et al.  Crystal growth and characterization of InBO3: Tb3+ , 1990 .

[43]  P. M. Raccah,et al.  Complex vs Band Formation in Perovskite Oxides , 1965 .