An Approach to Fault Detection for Multirate Sampled-Data Systems With Frequency Specifications

This paper is concerned with the design of fault detection for sampled-data systems, which are based on multirate sampling, with frequency specifications. A general multirate system is considered in this paper, where not only the inputs and outputs but also their different channels have different sampling rates. The purpose of this paper is to make this residual system with multirate sampling satisfy a given disturbance attenuation level over a restricted frequency range. With the use of the lifting technique, this paper reformulates a single-rate linear time-invariant system, which is equivalent to the multirate time-varying system. For a given restricted frequency range, convex conditions are obtained in designing a required fault detection filter. Then, the restricted frequency ranges problem are also solved specifically via the generalized Kalman–Yakubovic–Popov lemma. Finally, this paper uses a continuous-stirred tank reactor system to illustrate the effectiveness and advantages of the fault detection filter design method.

[1]  Guang-Hong Yang,et al.  Fault Detection for T–S Fuzzy Systems With Unknown Membership Functions , 2014, IEEE Transactions on Fuzzy Systems.

[2]  James Lam,et al.  An LMI approach to design robust fault detection filter for uncertain LTI systems , 2003, Autom..

[3]  Guanghong Yang,et al.  Dynamic observer-based robust control and fault detection for linear systems , 2012 .

[4]  Yongqiang Wang,et al.  A New Fault Detection Scheme for Networked Control Systems Subject to Uncertain Time-Varying Delay , 2008, IEEE Transactions on Signal Processing.

[5]  Steven X. Ding,et al.  Frequency domain approach to optimally robust residual generation and evaluation for model-based fault diagnosis , 1994, Autom..

[6]  Dimitri Lefebvre,et al.  Stochastic Petri Net Identification for the Fault Detection and Isolation of Discrete Event Systems , 2011, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans.

[7]  P. Gahinet,et al.  A linear matrix inequality approach to H∞ control , 1994 .

[8]  P. Shi.  Filtering on sampled-data systems with parametric uncertainty , 1998, IEEE Trans. Autom. Control..

[9]  Guang-Hong Yang,et al.  Fault Detection in Finite Frequency Domain for Takagi-Sugeno Fuzzy Systems With Sensor Faults , 2014, IEEE Transactions on Cybernetics.

[10]  Paul M. Frank,et al.  Analytical and Qualitative Model-based Fault Diagnosis - A Survey and Some New Results , 1996, Eur. J. Control.

[11]  M. S. Fadali,et al.  Timely robust fault detection for multirate linear systems , 2002 .

[12]  Heng Wang,et al.  Fault Detection for a Class of Uncertain State-Feedback Control Systems , 2010, IEEE Transactions on Control Systems Technology.

[13]  Guang-Hong Yang,et al.  Fault detection in finite frequency domains for multi‐delay uncertain systems with application to ground vehicle , 2015 .

[14]  Dominique Sauter,et al.  Optimal thresholding for robust fault detection of uncertain systems , 2000 .

[15]  Huijun Gao,et al.  Robust sampled-data H∞ control with stochastic sampling , 2009, Autom..

[16]  Cristian Mahulea,et al.  Fault Diagnosis of Discrete-Event Systems Using Continuous Petri Nets , 2012, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans.

[17]  Steven X. Ding,et al.  Model-based fault diagnosis in technical processes , 2000 .

[18]  M. S. Fadali,et al.  Fault detection for systems with multirate sampling , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[19]  Iman Izadi,et al.  Short communication An H1 approach to fast rate fault detection for multirate sampled-data systems , 2006 .

[20]  Steven X. Ding,et al.  A Lifting Based Approach to Observer Based Fault Detection of Linear Periodic Systems , 2012, IEEE Transactions on Automatic Control.

[21]  Jianbin Qiu,et al.  A Combined Adaptive Neural Network and Nonlinear Model Predictive Control for Multirate Networked Industrial Process Control , 2016, IEEE Transactions on Neural Networks and Learning Systems.

[22]  Shinji Hara,et al.  Feedback control synthesis of multiple frequency domain specifications via generalized KYP lemma , 2007 .

[23]  Bin Jiang,et al.  REDUCTION OF FALSE ALARMS IN FAULT DETECTION PROBLEMS , 2006 .

[24]  Tongwen Chen.  A simple derivation of the H2-optimal sampled-data controllers , 1993 .

[25]  Iman Izadi,et al.  An optimal scheme for fast rate fault detection based on multirate sampled data , 2005 .

[26]  Donghua Zhou,et al.  A frequency domain approach to fault detection in sampled-data systems , 2003, at - Automatisierungstechnik.

[27]  Jie Chen,et al.  Robust Model-Based Fault Diagnosis for Dynamic Systems , 1998, The International Series on Asian Studies in Computer and Information Science.

[28]  J.J. Gertler,et al.  Survey of model-based failure detection and isolation in complex plants , 1988, IEEE Control Systems Magazine.

[29]  P. Frank,et al.  Survey of robust residual generation and evaluation methods in observer-based fault detection systems , 1997 .

[30]  Shinji Hara,et al.  Generalized KYP lemma: unified frequency domain inequalities with design applications , 2005, IEEE Transactions on Automatic Control.

[31]  M. S. Fadali,et al.  Observer-based robust fault detection for a class of multirate sampled-data linear systems , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[32]  Iman Izadi,et al.  An H∞ approach to fast rate fault detection for multirate sampled-data systems , 2006 .

[33]  Jianbin Qiu,et al.  Fuzzy-Model-Based Reliable Static Output Feedback $\mathscr{H}_{\infty }$ Control of Nonlinear Hyperbolic PDE Systems , 2016, IEEE Transactions on Fuzzy Systems.

[34]  Jianbin Qiu,et al.  A Combined Fault-Tolerant and Predictive Control for Network-Based Industrial Processes , 2016, IEEE Transactions on Industrial Electronics.

[35]  N. Viswanadham,et al.  Fault diagnosis in multirate sampled data systems , 1990, 29th IEEE Conference on Decision and Control.