Integrating phase change materials in construction materials: Critical review

[1]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[2]  M. Lanzón,et al.  Effect of freeze-thaw cycles on the mechanical behavior of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials , 2019, Construction and Building Materials.

[3]  K. Mahboub,et al.  Application of a PCM-rich concrete overlay to control thermal induced curling stresses in concrete pavements , 2018, Construction and Building Materials.

[4]  V. Tyagi,et al.  Integration of passive PCM technologies for net-zero energy buildings , 2018, Sustainable Cities and Society.

[5]  E. Tuncel,et al.  A sustainable cold bonded lightweight PCM aggregate production: Its effects on concrete properties , 2018, Construction and Building Materials.

[6]  Zakaria Ilyes Djamai,et al.  Numerical and experimental study on the use of microencapsulated phase change materials (PCMs) in textile reinforced concrete panels for energy storage , 2018, Sustainable Cities and Society.

[7]  M. Madhkhan,et al.  An innovative apparatus for simulating daily temperature for investigating thermal performance of wallboards incorporating PCMs , 2018 .

[8]  P. Zavattieri,et al.  Numerical analysis of the freeze-thaw performance of cementitious composites that contain phase change material (PCM) , 2018 .

[9]  Laurent Pilon,et al.  Reduced-scale experiments to evaluate performance of composite building envelopes containing phase change materials , 2018 .

[10]  Luisa F. Cabeza,et al.  Multifunctional smart concretes with novel phase change materials: Mechanical and thermo-energy investigation , 2018 .

[11]  Jay G. Sanjayan,et al.  Development of thermal energy storage cementitious composites (TESC) containing a novel paraffin/hydrophobic expanded perlite composite phase change material , 2017 .

[12]  Youngjin Choi,et al.  Application of shape-stabilized phase-change material sheets as thermal energy storage to reduce heating load in Japanese climate , 2017 .

[13]  P. Zavattieri,et al.  Incorporating phase change materials in concrete pavement to melt snow and ice , 2017 .

[14]  G. Sant,et al.  Restrained shrinkage cracking of cementitious composites containing soft PCM inclusions: A paste (matrix) controlled response , 2017 .

[15]  Luca Valentini,et al.  Mechanical properties and microscale changes of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials , 2017 .

[16]  Sumin Kim,et al.  Investigation on thermal and mechanical characteristics of concrete mixed with shape stabilized phase change material for mix design , 2017 .

[17]  Laurent Pilon,et al.  Early-age temperature evolutions in concrete pavements containing microencapsulated phase change materials , 2017 .

[18]  A. Arora,et al.  Numerical simulations to quantify the influence of phase change materials (PCMs) on the early- and later-age thermal response of concrete pavements , 2017 .

[19]  Laurent Pilon,et al.  The durability of cementitious composites containing microencapsulated phase change materials , 2017 .

[20]  G. Sant,et al.  A general method for retrieving thermal deformation properties of microencapsulated phase change materials or other particulate inclusions in cementitious composites , 2017 .

[21]  Jialai Wang,et al.  Integrating phase change materials into concrete through microencapsulation using cenospheres , 2017 .

[22]  Yuka Kusama,et al.  Thermal effects of a novel phase change material (PCM) plaster under different insulation and heating scenarios , 2017 .

[23]  Jay G. Sanjayan,et al.  Assessing the feasibility of integrating form-stable phase change material composites with cementitious composites and prevention of PCM leakage , 2017 .

[24]  Gaurav Sant,et al.  Porous inclusions as hosts for phase change materials in cementitious composites: Characterization, thermal performance, and analytical models , 2017 .

[25]  S. M. Sadrameli,et al.  Composite of wood-plastic and micro-encapsulated phase change material (MEPCM) used for thermal energy storage , 2017 .

[26]  Carlos Salas-Bringas,et al.  Microencapsulated phase change materials for enhancing the thermal performance of Portland cement concrete and geopolymer concrete for passive building applications , 2017 .

[27]  Sassi Ben Nasrallah,et al.  Thermal behavior of a hybrid PCM/plaster: A numerical and experimental investigation , 2017 .

[28]  Prinya Chindaprasirt,et al.  Optimizing mix proportion and properties of lightweight concrete incorporated phase change material paraffin/recycled concrete block composite , 2016 .

[29]  B. Šavija,et al.  Use of phase change materials (PCMs) to mitigate early age thermal cracking in concrete: Theoretical considerations , 2016 .

[30]  Yilong Han,et al.  Simulating the Inter-Building Effect on energy consumption from embedding phase change materials in building envelopes , 2016 .

[31]  Hang Yu,et al.  Experimental assessment on a kind of composite wall incorporated with shape-stabilized phase change materials (SSPCMs) , 2016 .

[32]  Tuan Ngo,et al.  Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials , 2016 .

[33]  G. Sant,et al.  The influences of soft and stiff inclusions on the mechanical properties of cementitious composites , 2016 .

[34]  Gongsheng Huang,et al.  Investigation on the properties of a new type of concrete blocks incorporated with PEG/SiO2 composite phase change material , 2016 .

[35]  Romeu Vicente,et al.  Mechanical and thermal characterization of concrete with incorporation of microencapsulated PCM for applications in thermally activated slabs , 2016 .

[36]  A. Sari.  Thermal energy storage characteristics of bentonite-based composite PCMs with enhanced thermal conductivity as novel thermal storage building materials , 2016 .

[37]  Ahmet Sarı,et al.  Development and thermal performance of pumice/organic PCM/gypsum composite plasters for thermal energy storage in buildings , 2016 .

[38]  João Castro-Gomes,et al.  Development and optimisation of phase change material-impregnated lightweight aggregates for geopolymer composites made from aluminosilicate rich mud and milled glass powder , 2016 .

[39]  Zhanping You,et al.  Determination of Specific Heat Capacity on Composite Shape-Stabilized Phase Change Materials and Asphalt Mixtures by Heat Exchange System , 2016, Materials.

[40]  Yaghoob Farnam,et al.  Evaluating the Use of Phase Change Materials in Concrete Pavement to Melt Ice and Snow , 2016 .

[41]  J. Weiss,et al.  Binary mixtures of fatty acid methyl esters as phase change materials for low temperature applications , 2016 .

[42]  Hongyan Ma,et al.  Paraffin/expanded vermiculite composite phase change material as aggregate for developing lightweight thermal energy storage cement-based composites , 2015 .

[43]  Seunghwan Wi,et al.  Energy efficient Bio-based PCM with silica fume composites to apply in concrete for energy saving in buildings , 2015 .

[44]  Guido Sassi,et al.  A reference device for evaluating the thermal behavior of installed multilayered wall containing a phase change material , 2015 .

[45]  Zeyu Lu,et al.  Integration of form-stable paraffin/nanosilica phase change material composites into vacuum insulation panels for thermal energy storage , 2015 .

[46]  N. Li,et al.  The mechanism of different thermoregulation types of composite shape-stabilized phase change materials used in asphalt pavement , 2015 .

[47]  Jay G. Sanjayan,et al.  A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites , 2015 .

[48]  Xuming Mi,et al.  Study on functional and mechanical properties of cement mortar with graphite-modified microencapsulated phase-change materials , 2015 .

[49]  Jinhong Li,et al.  Preparation of paraffin/expanded vermiculite with enhanced thermal conductivity by implanting network carbon in vermiculite layers , 2015 .

[50]  Luisa F. Cabeza,et al.  PCM incorporation in a concrete core slab as a thermal storage and supply system: Proof of concept , 2015 .

[51]  Aaron R. Sakulich,et al.  Application of phase change materials to improve the thermal performance of cementitious material , 2015 .

[52]  Hyun-Do Yun,et al.  Effect of barium-based phase change material (PCM) to control the heat of hydration on the mechanical properties of mass concrete , 2015 .

[53]  Seong Jin Chang,et al.  Energy efficient thermal storage montmorillonite with phase change material containing exfoliated graphite nanoplatelets , 2015 .

[54]  Q. Wei,et al.  Fabrication and characterization of capric–lauric–palmitic acid/electrospun SiO2 nanofibers composite as form-stable phase change material for thermal energy storage/retrieval , 2015 .

[55]  Miguel Azenha,et al.  Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems , 2015 .

[56]  Shazim Ali Memon,et al.  Development of structural–functional integrated concrete with macro-encapsulated PCM for thermal energy storage , 2015 .

[57]  John J. J. Chen,et al.  Application of PCM underfloor heating in combination with PCM wallboards for space heating using price based control system , 2015 .

[58]  Peiwen Li,et al.  Experimental study of geopolymer mortar with incorporated PCM , 2015 .

[59]  Shazim Ali Memon,et al.  Development, mechanical properties and numerical simulation of macro encapsulated thermal energy storage concrete , 2015 .

[60]  Sumin Kim,et al.  Preparation of energy efficient paraffinic PCMs/expanded vermiculite and perlite composites for energy saving in buildings , 2015 .

[61]  David Nortershauser,et al.  Mechanical and thermo-physical behaviour of concretes and mortars containing phase change material , 2015 .

[62]  W. Lewandowski,et al.  The use of lightweight aggregate saturated with PCM as a temperature stabilizing material for road surfaces , 2015 .

[63]  Feng Xing,et al.  Utilization of macro encapsulated phase change materials for the development of thermal energy storage and structural lightweight aggregate concrete , 2015 .

[64]  Laurent Zalewski,et al.  Experimental and theoretical analysis of a cement mortar containing microencapsulated PCM , 2014 .

[65]  Miguel Azenha,et al.  Thermal behavior of cement based plastering mortar containing hybrid microencapsulated phase change materials , 2014 .

[66]  Xiong Zhang,et al.  Preparation technology of phase change perlite and performance research of phase change and temperature control mortar , 2014 .

[67]  Chao Li,et al.  Preparation and analysis of composite phase change material used in asphalt mixture by sol–gel method , 2014 .

[68]  Som S Shrestha,et al.  Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard , 2014 .

[69]  Albert Castell,et al.  Experimental Validation of a Methodology to Assess PCM Effectiveness in Cooling Building Envelopes Passively , 2014, Thermal Energy Storage with Phase Change Materials.

[70]  Laurent Royon,et al.  Optimization of PCM embedded in a floor panel developed for thermal management of the lightweight envelope of buildings , 2014 .

[71]  G. Sant,et al.  On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials , 2014 .

[72]  Miguel Nepomuceno,et al.  Experimental evaluation of cement mortars with phase change material incorporated via lightweight expanded clay aggregate , 2014 .

[73]  Romeu Vicente,et al.  Brick masonry walls with PCM macrocapsules: An experimental approach , 2014 .

[74]  J. Sanjayan,et al.  Fabrication and stability of form-stable diatomite/paraffin phase change material composites , 2014 .

[75]  Parviz Soroushian,et al.  Experimental and numerical study of shape-stable phase-change nanocomposite toward energy-efficient building constructions , 2014 .

[76]  Sabine Caré,et al.  Effect of phase change materials on the hydration reaction and kinetic of PCM-mortars , 2014, Journal of Thermal Analysis and Calorimetry.

[77]  Laurent Zalewski,et al.  Experimental investigation of thermal characteristics of a mortar with or without a micro-encapsulated phase change material , 2014 .

[78]  Sabine Caré,et al.  Experimental and multi-scale analysis of the thermal properties of Portland cement concretes embedded with microencapsulated Phase Change Materials (PCMs) , 2014 .

[79]  Feng Xing,et al.  Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels , 2014 .

[80]  S. M. Sadrameli,et al.  A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium , 2014 .

[81]  Fariborz Haghighat,et al.  Designing building envelope with PCM wallboards: Design tool development , 2014 .

[82]  A. Sari.  Composites of polyethylene glycol (PEG600) with gypsum and natural clay as new kinds of building PCMs for low temperature-thermal energy storage , 2014 .

[83]  Sughwan Kim,et al.  Thermal characteristics of mortar containing hexadecane/xGnP SSPCM and energy storage behaviors of envelopes integrated with enhanced heat storage composites for energy efficient buildings , 2014 .

[84]  J. L. Barroso de Aguiar,et al.  Latent heat storage in PCM containing mortars - study of microstructural modifications , 2013 .

[85]  Jisoo Jeon,et al.  Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete , 2013 .

[86]  Andrew Dawson,et al.  Thermal, mechanical and microstructural analysis of concrete containing microencapsulated phase change materials , 2013 .

[87]  Zhanping You,et al.  Preparation of composite shape-stabilized phase change materials for highway pavements , 2013 .

[88]  Zongjin Li,et al.  Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage , 2013 .

[89]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[90]  Zhengguo Zhang,et al.  Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase change material , 2013 .

[91]  Livio Mazzarella,et al.  Gypsum based composite materials with micro-encapsulated PCM: Experimental correlations for thermal properties estimation on the basis of the composition , 2013 .

[92]  Aaron R. Sakulich,et al.  Incorporation of Phase Change Materials in Cementitious Systems via Fine Lightweight Aggregate , 2012 .

[93]  Aaron R. Sakulich,et al.  Increasing the Service Life of Bridge Decks by Incorporating Phase-Change Materials to Reduce Freeze-Thaw Cycles , 2012 .

[94]  Victor M. Ferreira,et al.  Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution , 2012 .

[95]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[96]  Zhishen Wu,et al.  Properties of form-stable paraffin/silicon dioxide/expanded graphite phase change composites prepared by sol–gel method , 2012 .

[97]  Lei Zhang,et al.  Thermal and electrical conductivity enhancement of graphite nanoplatelets on form-stable polyethylene glycol/polymethyl methacrylate composite phase change materials , 2012 .

[98]  Michael Golias,et al.  Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures , 2011 .

[99]  Yi Wang,et al.  Stearic acid/silica fume composite as form-stable phase change material for thermal energy storage , 2011 .

[100]  A. Sari,et al.  Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage , 2011 .

[101]  S. C. Kaushik,et al.  DEVELOPMENT OF PHASE CHANGE MATERIALS BASED MICROENCAPSULATED TECHNOLOGY FOR BUILDINGS: A REVIEW , 2011 .

[102]  M. E. Navarro,et al.  Effect of microencapsulated phase change material in sandwich panels , 2010 .

[103]  Huanzhi Zhang,et al.  Silica encapsulation of n-octadecane via sol-gel process: a novel microencapsulated phase-change material with enhanced thermal conductivity and performance. , 2010, Journal of colloid and interface science.

[104]  Luz Sánchez-Silva,et al.  Microencapsulation of PCMs with a styrene-methyl methacrylate copolymer shell by suspension-like polymerisation , 2010 .

[105]  H. Brouwers,et al.  The behavior of self-compacting concrete containing micro-encapsulated Phase Change Materials , 2009 .

[106]  D. Ielmini,et al.  Phase Change Materials , 2009 .

[107]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[108]  Xin Wang,et al.  An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating , 2007 .

[109]  D. Bentz,et al.  Potential applications of phase change materials in concrete technology , 2007 .

[110]  Ramazan Demirboga,et al.  Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures , 2007 .

[111]  Dale P. Bentz,et al.  Transient plane source measurements of the thermal properties of hydrating cement pastes , 2007 .

[112]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .

[113]  H. Uysal,et al.  The effects of different cement dosages, slumps, and pumice aggregate ratios on the thermal conductivity and density of concrete , 2004 .

[114]  Jin-keun Kim,et al.  An experimental study on thermal conductivity of concrete , 2003 .

[115]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[116]  James E. Braun,et al.  Evaluating the Performance of Building Thermal Mass Control Strategies , 2001 .

[117]  D.D.L. Chung,et al.  Increasing the specific heat of cement paste by admixture surface treatments , 1999 .

[118]  T. D. Brown,et al.  The thermal conductivity of fresh concrete , 1970 .

[119]  D. Campbell-Allen,et al.  The thermal conductivity of concrete , 1963 .

[120]  Xiangfei Kong,et al.  Numerical and experimental research of cold storage for a novel expanded perlite-based shape-stabilized phase change material wallboard used in building , 2018 .

[121]  Feng Xing,et al.  Development of structural-functional integrated energy storage concrete with innovative macro-encapsulated PCM by hollow steel ball , 2017 .

[122]  Alex Ricklefs,et al.  Thermal Conductivity of Cementitious Composites Containing Microencapsulated Phase Change Materials , 2017 .

[123]  Laurent Pilon,et al.  Figure of merit for the thermal performance of cementitious composites containing phase change materials , 2016 .

[124]  Yajun Lv,et al.  Experimental and numerical study on thermal energy storage of polyethylene glycol/expanded graphite composite phase change material , 2016 .

[125]  Luisa F. Cabeza,et al.  Single layer mortars with microencapsulated PCM: Study of physical and thermal properties, and fire behaviour , 2016 .

[126]  Rasmus Lund Jensen,et al.  A new experimental method to determine specific heat capacity of inhomogeneous concrete material with incorporated microencapsulated-PCM , 2014 .

[127]  Luigi Marletta,et al.  A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings , 2013 .

[128]  Yunping Xi,et al.  Effect of Phase-Change Materials on Properties of Concrete , 2012 .

[129]  Frédéric Kuznik,et al.  A review on phase change materials integrated in building walls , 2011 .

[130]  D.D.L. Chung,et al.  Effect of sand addition on the specific heat and thermal conductivity of cement , 2000 .

[131]  G. Sant,et al.  Influence of Microencapsulated Phase Change Material ( PCM ) Characteristics on the Microstructure and Strength of Cementitious Composites : Experiments and Finite Element Simulations , 2022 .