Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review.
暂无分享,去创建一个
[1] B. Wesslén,et al. Tributyl citrate oligomers as plasticizers for poly (lactic acid): thermo-mechanical film properties and aging , 2003 .
[2] J. Vacanti,et al. Tissue engineering : Frontiers in biotechnology , 1993 .
[3] Y. Inoue,et al. Roles of Physical Aging on Crystallization Kinetics and Induction Period of Poly(l-lactide) , 2008 .
[4] J. Kolstad. Crystallization kinetics of poly(L‐lactide‐co‐meso‐lactide) , 1996 .
[5] Ralph Müller,et al. Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering. , 2006, Biomaterials.
[6] A. Maazouz,et al. Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy , 2012 .
[7] Hiroshi Mitomo,et al. Properties of crosslinked polylactides (PLLA & PDLA) by radiation and its biodegradability , 2007 .
[8] M. Day,et al. A DSC study of the crystallization behaviour of polylactic acid and its nanocomposites , 2006 .
[9] M. L. Lorenzo. Crystallization behavior of poly(l-lactic acid) , 2005 .
[10] A. Dekel,et al. Prospective clinical study of a novel biodegradable sub-acromial spacer in treatment of massive irreparable rotator cuff tears , 2013, European Journal of Orthopaedic Surgery & Traumatology.
[11] Masami Okamoto,et al. Foam processing and cellular structure of polylactide-based nanocomposites , 2006 .
[12] Xuesi Chen,et al. Stabilization of poly(lactic acid) by polycarbodiimide , 2008 .
[13] A. Hiltner,et al. Crystallization and phase separation in blends of high stereoregular poly(lactide) with poly(ethylene glycol) , 2003 .
[14] Mohammad S. Islam,et al. Influence of accelerated ageing on the physico-mechanical properties of alkali-treated industrial hemp fibre reinforced poly(lactic acid) (PLA) composites , 2010 .
[15] Koji Nakane,et al. Poly(lactide) nanofibers produced by a melt‐electrospinning system with a laser melting device , 2007 .
[16] H. Tsuji,et al. In Vitro Hydrolysis of Blends from Enantiomeric Poly(lactide)s. 2. Well-Stereocomplexed Fiber and Film. , 2001 .
[17] Ericka Stricklin-Parker,et al. Ann , 2005 .
[18] S. Ray,et al. Crystallization Behavior and Morphology of Biodegradable Polylactide/ Layered Silicate Nanocomposite , 2003 .
[19] Long Yu,et al. Polymer blends and composites from renewable resources , 2006 .
[20] J. Runt,et al. Crystallization and Microstructure of Poly(l-lactide-co-meso-lactide) Copolymers , 1998 .
[21] Lucia Sansone,et al. Processing and shelf life issues of selected food packaging materials and structures from renewable resources , 2011 .
[22] Marc A. Hillmyer,et al. Polylactide stereocomplex crystallites as nucleating agents for isotactic polylactide , 2001 .
[23] T. Deberardino,et al. In vivo comparison of a metal versus a biodegradable suture anchor. , 2004, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.
[24] R. Gross,et al. Citrate esters as plasticizers for poly(lactic acid) , 1997 .
[25] E. Wintermantel,et al. Thermal and mechanical properties of plasticized poly(L‐lactic acid) , 2003 .
[26] H. Gao,et al. Synthesis of a biodegradable tadpole-shaped polymer via the coupling reaction of polylactide onto mono(6-(2-aminoethyl)amino-6-deoxy)-beta-cyclodextrin and its properties as the new carrier of protein delivery system. , 2005, Journal of controlled release : official journal of the Controlled Release Society.
[27] Jay Singh,et al. Performance Evaluation of PLA against Existing PET and PS Containers , 2006 .
[28] Jagjit Singh,et al. Evaluation of oriented poly(lactide) polymers vs. existing PET and oriented PS for fresh food service containers , 2005 .
[29] S. Santavirta,et al. Bioabsorbable Miniplating Versus Metallic Fixation for Metacarpal Fractures , 2003, Clinical orthopaedics and related research.
[30] Stephen P. McCarthy,et al. Miscibility and biodegradability of blends of poly(lactic acid) and poly(vinyl acetate) , 1996 .
[31] João S. Soares,et al. Constitutive Framework for Biodegradable Polymers with Applications to Biodegradable Stents , 2008, ASAIO journal.
[32] G. G. Stokes. "J." , 1890, The New Yale Book of Quotations.
[33] Y. Levy,et al. A novel device for protecting rectum during prostate cancer irradiation: in vivo data on a large mammal model. , 2009, The Journal of urology.
[34] Philippe Katz,et al. Polylactic acid implants (New-Fill)® to correct facial lipoatrophy in HIV-infected patients: results of the open-label study VEGA , 2003, AIDS.
[35] Kristiina Oksman,et al. Mechanical Properties of Biodegradable Composites from Poly Lactic Acid (PLA) and Microcrystalline Cellulose (MCC) , 2005 .
[36] Michael J. Bevis,et al. Improvement of the mechanical properties of poly(D,L-lactide) by orientation , 2002 .
[37] Xiaoqing Zhang,et al. Morphological behaviour of poly(lactic acid) during hydrolytic degradation , 2008 .
[38] L. Avérous,et al. Poly(lactic acid): plasticization and properties of biodegradable multiphase systems , 2001 .
[39] D. Kaplan,et al. Biopolymers from Renewable Resources , 1998 .
[40] S. Ray,et al. Organically modified layered titanate: A new nanofiller to improve the performance of biodegradable polylactide , 2004 .
[41] L. Lavery,et al. Mechanical characteristics of poly-L-lactic acid absorbable screws and stainless steel screws in basilar osteotomies of the first metatarsal. , 1994, Journal of Foot and Ankle Surgery.
[42] L. Lim,et al. Processing technologies for poly(lactic acid) , 2008 .
[43] H. Tsuji,et al. Poly(L‐lactide). X. Enhanced surface hydrophilicity and chain‐scission mechanisms of poly(L‐lactide) film in enzymatic, alkaline, and phosphate‐buffered solutions , 2003 .
[44] J. Runt,et al. Crystallization and Solid-State Structure of Random Polylactide Copolymers: Poly(l-lactide-co-d-lactide)s , 2001 .
[45] Geoffrey W. Coates,et al. Stereoselective ring‐opening polymerization of rac‐lactide with a single‐site, racemic aluminum alkoxide catalyst: Synthesis of stereoblock poly(lactic acid) , 2000 .
[46] Young Ha Kim,et al. Improvement of flexural strengths of poly(L-lactic acid) by solid-state extrusion, 2: Extrusion through rectangular die , 2003 .
[47] Paul Kiekens,et al. Biopolymers: overview of several properties and consequences on their applications. , 2002 .
[48] Hideto Tsuji,et al. Photodegradation of biodegradable polyesters: A comprehensive study on poly(l-lactide) and poly(ɛ-caprolactone) , 2006 .
[49] D. Colombini,et al. Plasticization of poly(lactic acid) with oligomeric malonate esteramides: Dynamic mechanical and thermal film properties , 2005 .
[50] Alain Bourmaud,et al. Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid) , 2008 .
[51] S. Hackbarth,et al. Investigation of Polylactic Acid (PLA) Nanoparticles as Drug Delivery Systems for Local Dermatotherapy , 2009, Pharmaceutical Research.
[52] M. Xanthos,et al. Nanosize and microsize clay effects on the kinetics of the thermal degradation of polylactides , 2009 .
[53] H. Oyama. Super-tough poly(lactic acid) materials : Reactive blending with ethylene copolymer , 2009 .
[54] John B. Shoven,et al. I , Edinburgh Medical and Surgical Journal.
[55] Yoshito Ikada,et al. Thermal characterization of polylactides , 1988 .
[56] J. Sarasua,et al. Cracking in polylactide spherulites , 2005 .
[57] Yoshito Ikada,et al. Properties and morphology of poly(L-lactide). 4. Effects of structural parameters on long-term hydrolysis of poly(L-lactide) in phosphate-buffered solution , 2000 .
[58] L. Claes,et al. Resorbable polymer fibers for ligament augmentation. , 2001, Journal of biomedical materials research.
[59] Y. Shirai,et al. Thermal degradation behaviour of poly(lactic acid) stereocomplex , 2004 .
[60] C. Bowman,et al. Mechanical properties of hydrogels and their experimental determination. , 1996, Biomaterials.
[61] S. Ray,et al. New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties , 2003 .
[62] R. Singh,et al. An overview on the degradability of polymer nanocomposites , 2005 .
[63] J. Lunt. Large-scale production, properties and commercial applications of polylactic acid polymers , 1998 .
[64] Ming Yang,et al. Improvement of thermal and mechanical properties of poly(L-lactic acid) with 4,4-methylene diphenyl diisocyanate , 2006 .
[65] X. Sun,et al. Thermal and mechanical properties of poly(lactic acid)/starch/methylenediphenyl diisocyanate blending with triethyl citrate† , 2003 .
[66] Rahul M. Rasal,et al. Toughness decrease of PLA-PHBHHx blend films upon surface-confined photopolymerization. , 2009, Journal of biomedical materials research. Part A.
[67] Zhongze Gu,et al. Electrochemical Study on Synergistic Effect of the Blending of Nano TiO2 and PLA Polymer on the Interaction of Antitumor Drug with DNA , 2006 .
[68] Jae-Do Nam,et al. Electrospun dual-porosity structure and biodegradation morphology of Montmorillonite reinforced PLLA nanocomposite scaffolds. , 2005, Biomaterials.
[69] Tianwei Tan,et al. Studies on the oridonin-loaded poly(D,L-lactic acid) nanoparticles in vitro and in vivo. , 2007, International journal of biological macromolecules.
[70] C. Laurencin,et al. Biodegradable polymers as biomaterials , 2007 .
[71] H. Masuoka,et al. Pressure‐volume‐temperature behavior of polylactide, poly(butylene succinate), and poly(butylene succinate‐co‐adipate) , 2000 .
[72] X. Sun,et al. Properties of poly(lactic acid) blends with various starches as affected by physical aging , 2003 .
[73] Yoshito Ikada,et al. Stereocomplex formation between enantiomeric poly(lactides) , 1987 .
[74] Mahmoud Ahmadian,et al. Design and evaluation of basic standard encryption algorithm modules using nanosized complementary metal–oxide–semiconductor–molecular circuits , 2006 .
[75] Y. Doi,et al. Thermal degradation of poly((R)-3-hydroxybutyrate), poly(e-caprolactone), and poly((S)-lactide) , 2002 .
[76] Dirk W. Grijpma,et al. (Co)polymers of L‐lactide, 2. Mechanical properties , 1994 .
[77] D. Grijpma,et al. High molecular weight poly(l-lactide) and poly(ethylene oxide) blends: thermal characterization and physical properties , 1996 .
[78] Laurence W. McKeen,et al. 3 – Plastics Used in Medical Devices , 2014 .
[79] Manjusri Misra,et al. Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: A comparative study , 2006 .
[80] Yutaka Tokiwa,et al. Biodegradability and biodegradation of poly(lactide) , 2006, Applied Microbiology and Biotechnology.
[81] Shinji Ochi,et al. Mechanical properties of kenaf fibers and kenaf/PLA composites , 2008 .
[82] A. Janorkar,et al. Poly(lactic acid) modifications , 2010 .
[83] H. Daimon,et al. Water vapor permeability of poly(lactide)s : Effects of molecular characteristics and crystallinity , 2006 .
[84] H. Tsuji,et al. Poly(l-lactide): VI Effects of crystallinity on enzymatic hydrolysis of poly(l-lactide) without free amorphous region , 2001 .
[85] E. Giménez,et al. Optimization of Biodegradable Nanocomposites Based on aPLA/PCL Blends for Food Packaging Applications , 2006 .
[86] Emma Strömberg,et al. Assessing the MALDI-TOF MS sample preparation procedure to analyze the influence of thermo-oxidative ageing and thermo-mechanical degradation on poly (Lactide) , 2011 .
[87] M. Yamaguchi,et al. Miscibility, mechanical and thermal properties of poly(lactic acid)/polyester-diol blends , 2009 .
[88] H. Hamada,et al. Mechanical Property of Surface Modified Natural Fiber Reinforced PLA Biocomposites , 2013 .
[89] Shigeo Asai,et al. The radiation crosslinked films based on PLLA/PDLA stereocomplex after TAIC absorption in supercritical carbon dioxide , 2008 .
[90] Yoshito Ikada,et al. Stereocomplex formation between enantiomeric poly(lactic acid)s. XI. Mechanical properties and morphology of solution-cast films , 1999 .
[91] Xuesi Chen,et al. Biodegradable electrospun poly(l-lactide) fibers containing antibacterial silver nanoparticles , 2006 .
[92] I. C. Mcneill,et al. Polymer Chemistry , 1961, Nature.
[93] Jin‐San Yoon,et al. Reactive blending of poly(L-lactic acid) with poly(ethylene-co-vinyl alcohol) , 2005 .
[94] A. Guinault,et al. Oxidative degradation of polylactide (PLA) and its effects on physical and mechanical properties , 2014 .
[95] Yu Jiugao,et al. Study of the Properties of Plasticised Poly(Lactic Acid) with Poly(1,3-Butylene Adipate) , 2008 .
[96] Bin Yang,et al. Isothermal cold crystallization kinetics of polylactide/nucleating agents , 2007 .
[97] M. Bousmina,et al. Biodegradable polymers and their layered silicate nanocomposites: In greening the 21st century materials world , 2005 .
[98] V. Vittoria,et al. Potential perspectives of bio-nanocomposites for food packaging applications , 2007 .
[99] H. Fritz,et al. Filling of poly(lactic acid) with native starch , 1996 .
[100] Rafael Gavara,et al. Bioactive packaging: turning foods into healthier foods through biomaterials , 2006 .
[101] S. Li,et al. Further investigations on the hydrolytic degradation of poly (DL-lactide). , 1999, Biomaterials.
[102] H. Fritz,et al. Plasticizing polylactide—the effect of different plasticizers on the mechanical properties , 1999 .
[103] E. Jabbari,et al. Synthesis and characterization of bioresorbable in situ crosslinkable ultra low molecular weight poly(lactide) macromer , 2008, Journal of materials science. Materials in medicine.
[104] K. Sakurai,et al. Preparation of nanoparticles consisted of poly(L-lactide)-poly(ethylene glycol)-poly(L-lactide) and their evaluation in vitro. , 1999, International journal of pharmaceutics.
[105] Stephen P. McCarthy,et al. Biodegradable polymer blends of poly(lactic acid) and poly(ethylene glycol) , 1997 .
[106] A. Yemenicioğlu,et al. Antimicrobial and antioxidant activity of edible zein films incorporated with lysozyme, albumin proteins and disodium EDTA , 2007 .
[107] S. Suzuki,et al. Biodegradable Pin Fixation of Osteochondral Fragments of the Knee , 1996, Clinical orthopaedics and related research.
[108] M. Pluta. Morphology and properties of polylactide modified by thermal treatment, filling with layered silicates and plasticization , 2004 .
[109] P. Seib,et al. Blending of poly(lactic acid) and starches containing varying amylose content , 2003 .
[110] E. Groves. A Dissertation ON , 1928 .
[111] Yongjin Li,et al. Improvement in toughness of poly(L-lactide) (PLLA) through reactive blending with acrylonitrile-butadiene-styrene copolymer (ABS): Morphology and properties , 2009 .
[112] M. Kotaki,et al. A review on polymer nanofibers by electrospinning and their applications in nanocomposites , 2003 .
[113] A. Błędzki,et al. Mechanical performance of biocomposites based on PLA and PHBV reinforced with natural fibres – A comparative study to PP , 2010 .
[114] M. Kellomäki,et al. Effect of filler type on the mechanical properties of self-reinforced polylactide–calcium phosphate composites , 2001, Journal of materials science. Materials in medicine.
[115] Weihong Guo,et al. The nucleation effect of modified carbon black on crystallization of poly(lactic acid) , 2010 .
[116] Valentina Siracusa,et al. Biodegradable polymers for food packaging: a review , 2008 .
[117] Douglas E. Hirt,et al. Modification of poly(lactic acid) films: Enhanced wettability from surface-confined photografting and increased degradation rate due to an artifact of the photografting process , 2004 .
[118] Nesli Sozer,et al. Nanotechnology and its applications in the food sector. , 2009, Trends in biotechnology.
[119] A. Södergård,et al. Properties of lactic acid based polymers and their correlation with composition , 2002 .
[120] Christophe Baley,et al. Seawater ageing of flax/poly(lactic acid) biocomposites , 2009 .
[121] J. Mano,et al. Influence of melting conditions on the thermal behaviour of poly(l-lactic acid) , 2005 .
[122] M. Pyda,et al. Characterization of poly(lactic acid) by size exclusion chromatography, differential refractometry, light scattering and thermal analysis , 2006 .
[123] Andrew G. Glen,et al. APPL , 2001 .
[124] Hengxing Yu,et al. Modeling of poly(L‐lactide) thermal degradation: Theoretical prediction of molecular weight and polydispersity index , 2003 .
[125] B. Wesslén,et al. Film Extrusion and Film Weldability of Poly(lactic acid) Plasticized with Triacetine and Tributyl Citrate. , 2003 .
[126] Luc Avérous,et al. Nano-biocomposites: Biodegradable polyester/nanoclay systems , 2009 .
[127] X. Sun,et al. Melting behavior and crystallization kinetics of starch and poly(lactic acid) composites , 2003 .
[128] Yanmin Zhao,et al. Biological evaluation of poly-l-lactic acid composite containing bioactive glass , 2010 .
[129] Katrin Mackenzie,et al. Thermal decomposition of biodegradable polyesters—II. Poly(lactic acid) , 1996 .
[130] Y. Ikada,et al. Blends of aliphatic polyesters. I. Physical properties and morphologies of solution-cast blends from poly(DL-lactide) and poly(ε-caprolactone) , 1996 .
[131] Sabu Thomas,et al. Environmental effects on the degradation behaviour of sisal fibre reinforced polypropylene composites , 2002 .
[133] Y. Grohens,et al. Effect of natural weather on the structure and properties of polylactide/Cloisite 30B nanocomposites , 2010 .
[134] A. McHugh,et al. Modeling Melt Spinning of PLA Fibers , 2005 .
[135] M. Huneault,et al. Effect of nucleation and plasticization on the crystallization of poly(lactic acid) , 2007 .
[136] Catia Bastioli,et al. Effect of molecular weight and crystallinity on poly(lactic acid) mechanical properties , 1996 .
[137] Young Ha Kim,et al. Improvement of Flexural Strengths of Poly(L‐lactic acid) by Solid‐State Extrusion , 2001 .
[138] R. Shishoo,et al. Influence of processing parameters on the degradation of poly(L‐lactide) during extrusion , 2001 .
[139] Luigi Nicolais,et al. Reactively Modified Poly(lactic acid): Properties and Foam Processing , 2005 .
[140] V. Coma,et al. Effects of ultraviolet light (315 nm), temperature and relative humidity on the degradation of polylactic acid plastic films. , 2004, Chemosphere.
[141] S. Ramakrishna,et al. Electrospinning of nano/micro scale poly(L-lactic acid) aligned fibers and their potential in neural tissue engineering. , 2005, Biomaterials.
[142] Samir Mitragotri,et al. Physical approaches to biomaterial design. , 2009, Nature materials.
[143] Ingo Alig,et al. In-line monitoring of the thermal degradation of poly(l-lactic acid) during melt extrusion by UV–vis spectroscopy , 2008 .
[144] S. Mccarthy,et al. The Effect of Nanoclays on the Properties of PLLA-modified Polymers Part 1: Mechanical and Thermal Properties , 2006 .
[145] Julio F. Davalos,et al. Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures , 2007 .
[146] H. Yamane,et al. Effect of the addition of poly(d-lactic acid) on the thermal property of poly(l-lactic acid) , 2003 .
[147] A. Pandit,et al. Liposomal gene delivery mediated by tissue-engineered scaffolds. , 2010, Trends in biotechnology.
[148] M. Doxastakis,et al. Controlled release systems based on poly(lactic acid). An in vitro and in vivo study , 2000, Journal of materials science. Materials in medicine.
[149] Xuesi Chen,et al. Ultrafine medicated fibers electrospun from W/O emulsions. , 2005, Journal of controlled release : official journal of the Controlled Release Society.
[150] C. G. Pitt,et al. The biodegradability of polyester blends. , 1990, Biomaterials.
[151] Rubens Maciel Filho,et al. Poly-lactic acid synthesis for application in biomedical devices - a review. , 2012, Biotechnology advances.
[152] Simona Bronco,et al. Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing , 2009 .
[153] Yury Gogotsi,et al. Fluorescent PLLA-nanodiamond composites for bone tissue engineering. , 2011, Biomaterials.
[154] N. Yoshie,et al. Higher-order structures and mechanical properties of stereocomplex-type poly(lactic acid) melt spun fibers , 2006 .
[155] A. Södergård,et al. Stabilization of poly(l-lactide) in the melt , 1994 .
[156] A. Clarke,et al. Microbial shelf life determination of vacuum-packaged fresh beef treated with polylactic acid, lactic acid, and nisin solutions. , 1999, Journal of food protection.
[157] H. Tsuji,et al. Crystallization, spherulite growth, and structure of blends of crystalline and amorphous poly(lactide)s , 2009 .
[158] P. Gruber,et al. Polylactic Acid Technology , 2000 .
[159] N. Washburn,et al. Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends , 2003 .
[160] E H Burger,et al. In vitro and in vivo degradation of bioabsorbable PLLA spinal fusion cages. , 2002, Journal of biomedical materials research.
[161] S. Gogolewski,et al. Effect of in vivo and in vitro degradation on molecular and mechanical properties of various low-molecular-weight polylactides. , 1997, Journal of biomedical materials research.
[162] L. Matuana. Solid state microcellular foamed poly(lactic acid): morphology and property characterization. , 2008, Bioresource technology.
[163] Diego Mantovani,et al. Biodegradable Metals for Cardiovascular Stent Application: Interests and New Opportunities , 2011, International journal of molecular sciences.
[164] C. Nakafuku,et al. Glass transition and mechanical properties of PLLA and PDLLA‐PGA copolymer blends , 2004 .
[165] J. Dorgan,et al. Optical Properties of Polylactides , 2006 .
[166] Margaret Nichols. Trans , 2015, De-centering queer theory.
[167] M. Henley,et al. Fixation with bioabsorbable screws for the treatment of fractures of the ankle. , 1994, The Journal of bone and joint surgery. American volume.
[168] Bethany C Gross,et al. Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.
[169] D. Sawyer. Bioprocessing – no longer a field of dreams , 2003 .
[170] J. Sarasua,et al. Crystallization and melting behavior of polylactides , 1998 .
[171] H. Kricheldorf,et al. Polylactones: 31. Sn(II)octoate-initiated polymerization of L-lactide: a mechanistic study , 1995 .
[172] I. C. Mcneill,et al. Degradation studies of some polyesters and polycarbonates—2. Polylactide: Degradation under isothermal conditions, thermal degradation mechanism and photolysis of the polymer , 1985 .
[173] J. Seppälä,et al. The modification of lactic acid based poly(ester-urethane) by copolymerization , 1997 .
[174] W C de Bruijn,et al. Late degradation tissue response to poly(L-lactide) bone plates and screws. , 1995, Biomaterials.
[175] H. Yano,et al. The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites , 2009 .
[176] R. P. John,et al. An overview of the recent developments in polylactide (PLA) research. , 2010, Bioresource technology.
[177] A. Hiltner,et al. Aging of poly(lactide)/poly(ethylene glycol) blends. Part 2. Poly(lactide) with high stereoregularity , 2003 .
[178] B. Wesslén,et al. The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid) , 2002 .
[179] J. Way,et al. Gas permeation properties of poly(lactic acid) , 2001 .
[180] M. Xanthos,et al. A study on the degradation of polylactic acid in the presence of phosphonium ionic liquids , 2009 .
[181] P. Degée,et al. Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation , 2005 .
[182] G. Coates,et al. Stereoselective Ring-Opening Polymerization of meso-Lactide: Synthesis of Syndiotactic Poly(lactic acid) , 1999 .
[183] Leon P.B.M. Janssen,et al. Supercritical carbon dioxide as a green solvent for processing polymer melts: Processing aspects and applications , 2006 .
[184] P. Dubois,et al. New approach on the development of plasticized polylactide (PLA): Grafting of poly(ethylene glycol) (PEG) via reactive extrusion , 2011 .
[185] Bikash Mohanty,et al. Melt–solid polycondensation of lactic acid and its biodegradability , 2009 .
[186] K. Reichert,et al. Thermal degradation of poly-L-lactide-studies on kinetics, modelling and melt stabilisation , 1997 .
[187] A. Yousefi,et al. Three‐dimensional porous scaffolds at the crossroads of tissue engineering and cell‐based gene therapy , 2009, Journal of cellular biochemistry.
[188] L. Palade,et al. Polylactides: properties and prospects of an environmentally benign plastic from renewable resources , 2001 .
[189] R. Joerger,et al. Antimicrobial films for food applications: a quantitative analysis of their effectiveness , 2007 .
[190] Danika M. Hayman,et al. An Overview of Mechanical Properties and Material Modeling of Polylactide (PLA) for Medical Applications , 2015, Annals of Biomedical Engineering.
[191] Yong Xu,et al. In vitro degradation of poly(caprolactone), poly(lactide) and their block copolymers: influence of composition, temperature and morphology , 1997 .
[192] C. M. Agrawal,et al. Sterilization, toxicity, biocompatibility and clinical applications of polylactic acid/polyglycolic acid copolymers. , 1996, Biomaterials.
[193] Angela M. Harris,et al. Improving mechanical performance of injection molded PLA by controlling crystallinity , 2008 .
[194] Jöns Hilborn,et al. Poly(lactic acid) fiber : An overview , 2007 .
[195] Jose M. Lagaron,et al. Novel PET Nanocomposites of Interest in Food Packaging Applications and Comparative Barrier Performance With Biopolyester Nanocomposites , 2007 .
[196] M Kellomäki,et al. Bioabsorbable scaffolds for guided bone regeneration and generation. , 2000, Biomaterials.
[197] Young Ha Kim,et al. Synthesis and degradation of end‐group‐functionalized polylactide , 2001 .
[198] S. Ray,et al. New polylactide/layered silicate nanocomposites. 3. High-performance biodegradable materials , 2003 .
[199] S. Shalaby,et al. Biomedical polymers : designed-to-degrade systems , 1994 .
[200] Jörg Müssig,et al. Impact and tensile properties of PLA/Cordenka and PLA/flax composites , 2008 .
[201] J C Middleton,et al. Synthetic biodegradable polymers as orthopedic devices. , 2000, Biomaterials.
[202] L. Turng,et al. Effects of nucleation and stereocomplex formation of poly(lactic acid) , 2016 .
[203] Xiuzhi Sun,et al. THERMAL AND MECHANICAL PROPERTIES OF POLY(LACTIC ACID) AND STARCH BLENDS WITH VARIOUS PLASTICIZERS , 2001 .
[204] Linshu Liu,et al. Antimicrobial activity of nisin incorporated in pectin and polylactic acid composite films against Listeria monocytogenes , 2009 .
[205] A. Domb,et al. Biodegradable polymers derived from amino acids. , 2011, Macromolecular bioscience.
[206] Yoshikazu Tanaka,et al. Rapid controlled hydrolytic degradation of poly(l-lactic acid) by blending with poly(aspartic acid-co-l-lactide) , 2009 .
[207] J. Rhim. Potential Use of Biopolymer-based Nanocomposite Films in Food Packaging Applications , 2007 .
[208] Guoping Chen,et al. The influence of structural design of PLGA/collagen hybrid scaffolds in cartilage tissue engineering. , 2010, Biomaterials.
[209] D. Vernon. Inform , 1995, Encyclopedia of the UN Sustainable Development Goals.
[210] S. Ray,et al. Biodegradable Polylactide and Its Nanocomposites: Opening a New Dimension for Plastics and Composites , 2003 .
[211] Bernke J Papenburg,et al. Development and analysis of multi-layer scaffolds for tissue engineering. , 2009, Biomaterials.
[212] C. Dass,et al. Recent developments in liposomes, microparticles and nanoparticles for protein and peptide drug delivery , 2010, Peptides.
[213] D. Cohn,et al. Phase separation in poly(ethylene glycol)/poly(lactic acid) blends , 1988 .
[214] M. L. Focarete,et al. Miscibility and Mechanical Properties of Blends of (l)-Lactide Copolymers with Atactic Poly(3-hydroxybutyrate) , 2002 .
[215] R. Suuronen,et al. Biodegradable polylactide plates and screws in orthognathic surgery: technical note. , 1998, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[216] R. Gurny,et al. Biodegradable nanoparticles — From sustained release formulations to improved site specific drug delivery , 1996 .
[217] I. Fishbein,et al. Nanoparticulate delivery system of a tyrphostin for the treatment of restenosis. , 2000, Journal of controlled release : official journal of the Controlled Release Society.
[218] C. Migliaresi,et al. Dynamic mechanical and calorimetric analysis of compression-molded PLLA of different molecular weights : effect of thermal treatments , 1991 .
[219] C. Hamm,et al. Current status of bioresorbable scaffolds in the treatment of coronary artery disease. , 2014, Journal of the American College of Cardiology.
[220] P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .
[221] Gregory L. Baker,et al. Stereoselective polymerization of a racemic monomer with a racemic catalyst: Direct preparation of the polylactic acid stereocomplex from racemic lactide , 2000 .
[222] J. Runt,et al. Effects of molecular architecture on two‐step, melt‐spun poly(lactic acid) fibers , 2002 .
[223] C R Culberson,et al. Parameters affecting cellular adhesion to polylactide films. , 1999, Journal of biomaterials science. Polymer edition.
[224] K. Oksman,et al. The Effect of Morphology and Chemical Characteristics of Cellulose Reinforcements on the Crystallinity of Polylactic Acid , 2006 .
[225] P. Pagès,et al. Processing of poly(lactic acid): characterization of chemical structure, thermal stability and mechanical properties , 2010 .