Characteristics of co-combustion and kinetic study on hydrothermally treated municipal solid waste with different rank coals: A thermogravimetric analysis

This study presents an investigation on the influence of hydrothermally treated municipal solid waste (MSW) on the co-combustion characteristics with different rank coals, i.e. Indian, Indonesian and Australian coals. MSW blends of 10%, 20%, 30% and 50% (wt.%) with different rank coals were tested in a thermogravimetric analyser (TGA) in the temperature range from ambient to 700 °C under the heating rate of 10 °C/min. Combustion characteristics such as volatile release, ignition and burnout were studied for the blend fuel. Different ignition behavior was observed depending on the blends composition and the coal rank. The result of this work indicates that the blending of MSW improves devolatization properties of coal. But it was found that the co-combustion characteristics of MSW and coal blend cannot be predicted only from the pyrolytic and or devolatization phenomena as the other factors such as the coal quality also plays a vital role in deciding the blends co-combustion characteristics. The TGA combustion profiles showed that the combustion characteristics of blends followed those of parent fuels in both an additive and non-additive manners. These experimental results help to understand and predict the behavior of coal and MSW blends in practical applications.

[1]  Covadonga Pevida,et al.  A comparison of different methods for predicting coal devolatilisation kinetics , 2001 .

[2]  M. Otero,et al.  Simultaneous thermogravimetric-mass spectrometric study on the co-combustion of coal and sewage sludges , 2006 .

[3]  G. Sakellaropoulos,et al.  Pyrolysis kinetics and combustion characteristics of waste recovered fuels , 2009 .

[4]  L. F. Calvo,et al.  Analysis of the co-combustion of sewage sludge and coal by TG-MS , 2002 .

[5]  H. Vuthaluru Investigations into the pyrolytic behaviour of coal/biomass blends using thermogravimetric analysis. , 2004, Bioresource technology.

[6]  A. Demirbas,et al.  Co-firing Coal and Municipal Solid Waste , 2007 .

[7]  Kuihua Han,et al.  Thermogravimetric analysis of the relationship among calcium magnesium acetate, calcium acetate and magnesium acetate , 2010 .

[8]  M. Otero,et al.  Effects of sewage sludge blending on the coal combustion: a thermogravimetric assessment. , 2007, Chemosphere.

[9]  Qing Wang,et al.  Interactions and kinetic analysis of oil shale semi-coke with cornstalk during co-combustion , 2011 .

[10]  A. Sadhukhan,et al.  Modelling of pyrolysis of coal-biomass blends using thermogravimetric analysis. , 2008, Bioresource technology.

[11]  V. Sahajwalla,et al.  Simultaneous Combustion of Waste Plastics with Coal for Pulverized Coal Injection Application , 2006 .

[12]  Xiang-guo Li,et al.  Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres , 2006 .

[13]  Liao Yanfen,et al.  Thermogravimetric analysis of the co-combustion of coal and paper mill sludge , 2010 .

[14]  Despina Vamvuka,et al.  Possibility of using paper sludge in co-firing applications , 2009 .

[15]  Fengyin Wang,et al.  Thermogravimetric studies of the behavior of wheat straw with added coal during combustion. , 2009 .

[16]  Chuang-zhi Wu,et al.  A Study on Combustion Characteristics and Kinetic Model of Municipal Solid Wastes , 2001 .

[17]  Asri Gani,et al.  Characteristics of Co-combustion of Low-Rank Coal with Biomass , 2005 .

[18]  M. Folgueras,et al.  Thermogravimetric analysis of the co-combustion of coal and sewage sludge ☆ , 2003 .

[19]  J. Hustad,et al.  Pyrolysis characteristics and kinetics of municipal solid wastes , 2001 .