Novel inductive hot embossing for increasing micromolding efficiency

[1]  Guoqun Zhao,et al.  Development and evaluation of a new rapid mold heating and cooling method for rapid heat cycle molding , 2014 .

[2]  Sheng-Jye Hwang,et al.  Study on Induction Heating Coil for Uniform Mold Cavity Surface Heating , 2014 .

[3]  S. Chen,et al.  Study on the replication accuracy of polymer hot embossed microchannels , 2013 .

[4]  Rajeeb Kumar Jena,et al.  Comparison of different molds (epoxy, polymer and silicon) for microfabrication by hot embossing technique , 2012 .

[5]  Sen-Yue Yang,et al.  Fabrication of anti-reflective structures using hot embossing with a stainless steel template irradiated by femtosecond laser , 2011 .

[6]  F. Cheng,et al.  Soft UV-Imprinting Using Gasbag Pressure Mechanism for Side-Direction and Non-Planar Substrate , 2011 .

[7]  Ming-Shyan Huang,et al.  Effect of multi-layered induction coils on efficiency and uniformity of surface heating , 2010 .

[8]  James Alastair McLaughlin,et al.  Characterisation of PMMA microfluidic channels and devices fabricated by hot embossing and sealed by direct bonding , 2009 .

[9]  Ming‐Shyan Huang,et al.  Experimental Rapid Surface Heating by Induction for Micro-Injection Molding of Light-Guided Plates , 2009 .

[10]  M. Guttmann,et al.  Hot Embossing of Microoptical Components Prototyped by Deep Proton Writing , 2008, IEEE Photonics Technology Letters.

[11]  Cheng-Tang Pan,et al.  Hot embossing of micro-lens array on bulk metallic glass , 2008 .

[12]  H. Bersee,et al.  Induction welding of thermoplastic composites—an overview , 2006 .

[13]  Shih-Chih Nian,et al.  Soft mold and gasbag pressure mechanism for patterning submicron patterns onto a large concave substrate , 2006 .

[14]  Sen-Yue Yang,et al.  Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold , 2006 .

[15]  Rean-Der Chien,et al.  Hot embossing of microfluidic platform , 2006 .

[16]  Valery Rudnev,et al.  Handbook of Induction Heating , 2002 .

[17]  Michael D. Stewart,et al.  Patterning curved surfaces: Template generation by ion beam proximity lithography and relief transfer by step and flash imprint lithography , 1999 .

[18]  M. Huang,et al.  Enhancement of induction heating efficiency on injection mold surface using a novel magnetic shielding method , 2014 .