Operating Performance Enhancing Method for Doubly Salient Electromagnetic Machine Under Light Load Condition

Nowadays, more and more electric machines are demanded to operate under wide ranges of speed and load conditions. This paper deals with the operating performance enhancing method for doubly salient electromagnetic machine (DSEM) under light load condition. With the finding that the power loss can be decreased with reduced field current, and there’s regulated space for the distribution of field current and armature current under light load condition. A novel control method with field current inner loop and speed outer loop is proposed for DSEM, the system driving efficiency is desired to be improved. Meanwhile, the cogging torque which is a main ripple source of DSEM torque can be decreased with the reduced filed current, so the output torque performance can be enhanced as well. In addition, the armature reaction of the proposed control method is researched, and the influence on the filed current control during commutation process is theoretically analyzed. The experiments on a 12/8-pole DSEM validate the correctness and flexibility of the proposed control method.

[1]  Li Sun,et al.  Iron Loss Analysis of Doubly Salient Brushless DC Generators , 2015, IEEE Transactions on Industrial Electronics.

[2]  Janne Nerg,et al.  Iron Loss Analysis of the Permanent-Magnet Synchronous Machine Based on Finite-Element Analysis Over the Electrical Vehicle Drive Cycle , 2016, IEEE Transactions on Industrial Electronics.

[3]  Xingwei Zhou,et al.  Position Sensorless Control for Doubly Salient Electromagnetic Machine With Improved Startup Performance , 2020, IEEE Transactions on Industrial Electronics.

[6]  Ma Xiaohan.  Researches on the Three-phase Six-state Control Strategy of Doubly Salient Electro-magnetic Motors , 2013 .

[7]  X. Liu,et al.  Comparative Study of Novel Variable Flux Reluctance Machines With Doubly Fed Doubly Salient Machines , 2013, IEEE Transactions on Magnetics.

[8]  Yangguang Yan,et al.  Torque Density Improvement of Doubly Salient Electromagnetic Machine With Asymmetric Current Control , 2016, IEEE Transactions on Industrial Electronics.

[9]  Yangguang Yan,et al.  A New Topology of Low Speed Doubly Salient Brushless DC Generator for Wind Power Generation , 2012, IEEE Transactions on Magnetics.

[10]  Lan Yang,et al.  Self-optimizing control of advanced commutation angle for doubly salient electromagnetic machine , 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society.

[11]  Lan Xiao,et al.  Core-Loss Analysis of High-Speed Doubly Salient Electromagnetic Machine for Aeronautic Starter/Generator Application , 2020, IEEE Transactions on Industrial Electronics.

[12]  Yangguang Yan,et al.  Self-Tuning Control of Advanced Angles for Doubly Salient Motor Drive System , 2020, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[13]  Huizhen Wang,et al.  A Doubly Salient Starter/Generator With Two-Section Twisted-Rotor Structure for Potential Future Aerospace Application , 2012, IEEE Transactions on Industrial Electronics.

[14]  Bhim Singh,et al.  A single stage solar PV array based water pumping system using SRM drive , 2016, 2016 IEEE Industry Applications Society Annual Meeting.

[15]  Huizhen Wang,et al.  New approach to suppress torque ripple and improve torque output for wound-excited doubly salient machine , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[16]  G. Narayanan,et al.  Impact of dead-time on inverter input current, DC-link dynamics and light-load instability in rectifier-inverter-fed induction motor drives , 2016, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM).

[17]  J. F. Charpentier,et al.  Optimal Design of a Novel Doubly Salient Permanent Magnet Motors for High Power Ship Propulsion , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[18]  Li Yu,et al.  Efficiency Improvement and Thermal Analysis of a Totally Enclosed Self-Cooling Doubly Salient Generator With Optimized Stator Yoke , 2016, IEEE Transactions on Magnetics.

[19]  Aurobinda Routray,et al.  A Method for Detecting Half-Broken Rotor Bar in Lightly Loaded Induction Motors Using Current , 2016, IEEE Transactions on Instrumentation and Measurement.

[20]  Bo Zhou,et al.  Analysis of Current for Fault- Tolerant Control of Excitation Fault in DSEG , 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society.