Study on crack propagation of functionally graded ultra-high performance cementitious composite
暂无分享,去创建一个
Hao Liu | Yanfei Niu | Yafang Zhang | Weijian Zhang | Sihai Bao | K. Zeng
[1] Haoliang Huang,et al. Investigation of Fatigue Crack Propagation Behavior in Steel Fiber-Reinforced Ultra-High-Performance Concrete (UHPC) Under Cyclic Flexural Loading , 2021, Composite Structures.
[2] Jianzhong Lai,et al. Dynamic behavior of functional graded cementitious composite under the coupling of high speed penetration and explosion , 2021 .
[3] Y. Qiao,et al. Microstructural characteristics and their impact on mechanical properties of steel-PVA fiber reinforced concrete , 2021 .
[4] D. Zou,et al. Multiscale insights on enhancing tensile properties of ultra-high performance cementitious composite with hybrid steel and polymeric fibers , 2021 .
[5] Jiangxiong Wei,et al. Crack propagation behavior of ultra-high-performance concrete (UHPC) reinforced with hybrid steel fibers under flexural loading , 2021 .
[6] M. Eissa,et al. Experimental and theoretical behaviour of reinforced concrete beams containing hybrid fibres , 2021 .
[7] A. Dalvand,et al. Flexural and impact performance of functionally graded reinforced cementitious composite (FGRCC) panels , 2021 .
[8] Chandrashekhar Lakavath,et al. Multi-linear tensile stress-crack width relationships for hybrid fibre reinforced concrete using inverse analysis and digital image correlation , 2020 .
[9] H. Brouwers,et al. Enhancing the low-velocity impact resistance of ultra-high performance concrete by an optimized layered-structure concept , 2020 .
[10] D. Zou,et al. Dynamic and environmental performance of eco-friendly ultra-high performance concrete containing waste cathode ray tube glass as a substitution of river sand , 2020 .
[11] J. Ning,et al. Failure analysis of reinforced concrete slab under impact loading using a novel numerical method , 2020 .
[12] Dooyeol Yoo,et al. Enhancing the rate dependent fiber/matrix interfacial resistance of ultra-high-performance cement composites through surface abrasion , 2020 .
[13] Janet M. Lees,et al. Functionally graded concrete: Design objectives, production techniques and analysis methods for layered and continuously graded elements , 2020, Construction and Building Materials.
[14] H. Jing,et al. Fracture evolution mechanism of hollow sandstone under conventional triaxial compression by X-ray micro-CT observations and three-dimensional numerical simulations , 2020, International Journal of Solids and Structures.
[15] H. Brouwers,et al. Functionally graded ultra-high performance cementitious composite with enhanced impact properties , 2020 .
[16] C. Pruncu,et al. Recent progress of reinforcement materials: a comprehensive overview of composite materials , 2019, Journal of Materials Research and Technology.
[17] Haoliang Huang,et al. Development of the strain field along the crack in ultra-high-performance fiber-reinforced concrete (UHPFRC) under bending by digital image correlation technique , 2019, Cement and Concrete Research.
[18] M. Shakeri,et al. A review on optimization of composite structures Part II: Functionally graded materials , 2019, Composite Structures.
[19] Weiwei Sun,et al. Influence of fiber mixture on impact response of ultra-high-performance hybrid fiber reinforced cementitious composite , 2019, Composites Part B: Engineering.
[20] Y. Yoon,et al. Effects of geometry and hybrid ratio of steel and polyethylene fibers on the mechanical performance of ultra-high-performance fiber-reinforced cementitious composites , 2019, Journal of Materials Research and Technology.
[21] L. Sorelli,et al. A modified accelerated chloride migration tests for UHPC and UHPFRC with PVA and steel fibers , 2019, Cement and Concrete Research.
[22] B. Lee,et al. Response of UHPFRC and HDFRC under static and high-velocity projectile impact loads , 2018, Construction and Building Materials.
[23] Zhenkun Lei,et al. Study on bending damage and failure of basalt fiber reinforced concrete under freeze-thaw cycles , 2018 .
[24] J. Lees,et al. Experimental investigation of crack propagation and crack branching in lightly reinforced concrete beams using digital image correlation , 2017 .
[25] Lei Wang,et al. Experimental study on dynamic mechanical properties of the basalt fiber reinforced concrete after the freeze-thaw based on the digital image correlation method , 2017 .
[26] J. Park,et al. Fiber pullout behavior of HPFRCC: Effects of matrix strength and fiber type , 2017 .
[27] Na Wang,et al. An experimental study on crack propagation at rock-concrete interface using digital image correlation technique , 2017 .
[28] Q. Fang,et al. Triaxial compressive behavior of UHPCC and applications in the projectile impact analyses , 2016 .
[29] K. Koh,et al. Hybrid effects of steel fiber and microfiber on the tensile behavior of ultra-high performance concrete , 2016 .
[30] Huimin Xie,et al. Digital image correlation technique , 2015 .
[31] Young Soo Yoon,et al. Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC , 2014 .
[32] Petr Konvalinka,et al. Mix design of UHPFRC and its response to projectile impact , 2014 .
[33] B. Mi. Research on Improving the Mechanical Properties and Microstructure of Concrete with Steel Fiber , 2013 .
[34] Wei Dong,et al. An experimental investigation on the FPZ properties in concrete using digital image correlation technique , 2011 .
[35] Y. Zhou,et al. Digital image correlation approach to cracking and decohesion in a brittle coating/ductile substrate system , 2011 .
[36] Zishun Liu,et al. Numerical study on concrete penetration/perforation under high velocity impact by ogive-nose steel projectile , 2011 .
[37] Y. Mohammadi,et al. Impact resistance of steel fibrous concrete containing fibres of mixed aspect ratio , 2009 .
[38] Lori Graham-Brady,et al. Digital image correlation analysis of interfacial debonding properties and fracture behavior in concrete , 2007 .
[39] N. Banthia,et al. Crack growth resistance of hybrid fiber reinforced cement composites , 2003 .
[40] Leslie George Tham,et al. Numerical studies of the influence of microstructure on rock failure in uniaxial compression — Part I: effect of heterogeneity , 2000 .
[41] P. Richard,et al. Composition of reactive powder concretes , 1995 .
[42] T Sedran,et al. Optimization of ultra-high-performance concrete by the use of a packing model , 1994 .