Experimental study on strain and deformation monitoring of reinforced concrete structures using PPP-BOTDA

Pulse-prepump Brillouin optical time domain analysis (PPP-BOTDA) is a novel technique for distributed strain measurements, in which a pre-pump pulse is inputted in front of the measuring pump pulse to stimulate the phonon, so that higher spatial resolution and measurement precision can be obtained. Principle, methodologies and technical parameters of the PPP-BOTDA are presented and the influence of temperature on measurements is discussed. Applications are made in the bond test of steel rebars and the bending test of concrete girders. Test results show that the PPP-BOTDA can provide a precise description on the strain distribution of steel rebar and concrete, exhibiting the ability for crack detection. Moreover, structural deformation can be obtained indirectly by accumulating the distributed strains along the optical fiber, thus the deflection curves of the concrete girder during the loading process are obtained. Suggestions with regards to the application of the PPP-BOTDA in strain measurements and crack monitoring for civil infrastructures are given.

[1]  K. Shimizu,et al.  Development of a distributed sensing technique using Brillouin scattering , 1995 .

[2]  Lan Chung,et al.  Bond strength prediction for reinforced concrete members with highly corroded reinforcing bars , 2008 .

[3]  L. Thévenaz,et al.  Brillouin gain spectrum characterization in single-mode optical fibers , 1997 .

[4]  Anthony W. Brown,et al.  Characterization of the Brillouin-loss spectrum of single-mode fibers by use of very short (<10-ns) pulses. , 1999, Optics letters.

[5]  Sean G. Calvert,et al.  Bridge structural health monitoring system using fiber grating sensors: development and preparation for a permanent installation , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[6]  Michael Iten,et al.  Landslide monitoring using a road-embedded optical fiber sensor , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  Il-Bum Kwon,et al.  Distributed strain and temperature measurement of a beam using fiber optic BOTDA sensor , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[8]  Anthony W. Brown,et al.  Tensile and compressive strain measurement in the lab and field with the distributed Brillouin scattering sensor , 2001 .

[9]  M. Valcuende,et al.  Bond behaviour of reinforcement in self-compacting concretes , 2009 .

[10]  T. Horiguchi,et al.  Optical-fiber-attenuation investigation using stimulated Brillouin scattering between a pulse and a continuous wave. , 1989, Optics letters.

[11]  Baidar Bakht,et al.  Predicting deflections of a simply supported pre-stressed concrete girder subjected to static loads from observed strains , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  Il-Bum Kwon,et al.  Development of Fiber Optic BOTDA Sensor for Intrusion Detection , 2001 .

[13]  H. Ohno,et al.  Industrial Applications of the BOTDR Optical Fiber Strain Sensor , 2001 .