A Combined Continuum/DSMC Technique for Multiscale Analysis of Microfluidic Filters

A multiscale method that combines continuum fluid models with the direct simulation Monte Carlo (DSMC) method is presented. The continuum regions are treated by Stokes equations and a scattered point based finite cloud method is employed to solve the Stokes equations. The continuum and DSMC regions are combined by an overlapped Schwarz alternating method with Dirichlet?Dirichlet type boundary conditions. A scattered point interpolation scheme is developed to interpolate the solution between subdomains. The convergence characteristics of the multiscale approach are investigated in detail. Specifically, the dependence of convergence on the overlap size, the DSMC noise, and the number of time steps employed in the DSMC algorithm are studied. While the convergence depends weakly on the DSMC noise and the overlap size, the number of DSMC time steps simulated in each coupling iteration should be selected so that the total time steps simulated until convergence of the coupled process is close to the time constant of the DSMC subsystem. Steady-state analysis of microfluidic filters is studied in detail using the multiscale approach. The multiscale approach is also applied for the simulation of a membrane with an array of microfluidic filters and a dual-stage microfluidic device with an array of microfluidic filters for particle trapping and sorting.

[1]  Gang Chen,et al.  Statistical Error Analysis for the Direct Simulation Monte Carlo Technique , 1996 .

[2]  W. Steckelmacher.  Molecular gas dynamics and the direct simulation of gas flows , 1996 .

[3]  George Em Karniadakis,et al.  REPORT: A MODEL FOR FLOWS IN CHANNELS, PIPES, AND DUCTS AT MICRO AND NANO SCALES , 1999 .

[4]  Alejandro L. Garcia,et al.  Adaptive Mesh and Algorithm Refinement Using Direct Simulation Monte Carlo , 1999 .

[5]  G. Bird.  Molecular Gas Dynamics and the Direct Simulation of Gas Flows , 1994 .

[6]  Edward S. Piekos,et al.  DSMC modeling of micromechanical devices , 1995 .

[7]  Hassan Hassan,et al.  Assessment of schemes for coupling Monte Carlo and Navier-Stokes solution methods , 1996 .

[8]  N. Aluru,et al.  Application of a parallel DSMC technique to predict flow characteristics in microfluidic filters , 2001 .

[9]  B. Z. Cybyk,et al.  Direct Simulation Monte Carlo: Recent Advances and Applications , 1998 .

[10]  N. Aluru,et al.  Finite cloud method: a true meshless technique based on a fixed reproducing kernel approximation , 2001 .

[11]  Patrick Le Tallec,et al.  Coupling Boltzmann and Navier-Stokes Equations by Half Fluxes , 1997 .

[12]  Chih-Ming Ho,et al.  Micromachined membrane particle filters , 1999, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[13]  K. Breuer,et al.  Gaseous slip flow in long microchannels , 1997 .

[14]  William W. Liou,et al.  Implicit Boundary Conditions for Direct Simulation Monte Carlo Method in MEMS Flow Predictions , 2000 .

[15]  G. Kovacs.  Micromachined Transducers Sourcebook , 1998 .

[16]  Lyle N. Long,et al.  Direct simulation Monte Carlo model of Low Reynolds number nozzle flows , 1994 .

[17]  I. Boyd,et al.  Statistical error analysis for the direct simulation Monte Carlo method , 1995 .

[18]  N. Hadjiconstantinou.  Regular Article: Hybrid Atomistic–Continuum Formulations and the Moving Contact-Line Problem , 1999 .

[19]  R. Nance,et al.  Role of Boundary Conditions in Monte Carlo Simulation of Microelectromechanical Systems , 1998 .

[20]  N. Aluru,et al.  Meshless analysis of steady-state electro-osmotic transport , 2000, Journal of Microelectromechanical Systems.

[21]  M. Ferrari,et al.  Silicon membrane nanofilters from sacrificial oxide removal , 1999 .