Low contrast 3D reconstruction from C-arm data

The integration of 3D-imaging functionality into C-arm systems combines advantages of interventional X-ray systems, e.g. good patient access and live fluoroscopy, with 3D imaging capabilities similar to those of a CT-scanner. To date 3D-imaging with a C-arm system has been mainly used to visualize high contrast objects. However, the advent of high quality flat panel detectors improves the low contrast imaging capabilities. We discuss the influence of scattered radiation, beam hardening, truncated projections, quantization and detector recording levels on the image quality. Subsequently, we present algorithms and methods to correct these effects in order to achieve low contrast resolution. The performance of our pre- and post-reconstructive correction procedures is demonstrated by first clinical cases.

[1]  D. Parker.  Optimal short scan convolution reconstruction for fan beam CT , 1982 .

[2]  Ruola Ning,et al.  X-ray scatter suppression algorithm for cone-beam volume CT , 2002, SPIE Medical Imaging.

[3]  A H Baydush,et al.  Bayesian image estimation of digital chest radiography: interdependence of noise, resolution, and scatter fraction. , 1995, Medical physics.

[4]  N. Navab,et al.  Enhanced 3-D-reconstruction algorithm for C-arm systems suitable for interventional procedures , 2000, IEEE Transactions on Medical Imaging.

[5]  J. Hsieh,et al.  An iterative approach to the beam hardening correction in cone beam CT. , 2000, Medical physics.

[6]  K. Klingenbeck-Regn,et al.  Efficient object scatter correction algorithm for third and fourth generation CT scanners , 1999, European Radiology.

[7]  Georg Rose,et al.  Image quality of flat-panel cone beam CT , 2003, SPIE Medical Imaging.

[8]  Nassir Navab,et al.  Enhanced 3D-reconstruction algorithms for C-Arm based interventional procedures , 2000, IEEE Trans. Medical Imaging.

[9]  J. Hsieh,et al.  A novel reconstruction algorithm to extend the CT scan field-of-view. , 2004, Medical physics.

[10]  P M Joseph,et al.  A method for simultaneous correction of spectrum hardening artifacts in CT images containing both bone and iodine. , 1997, Medical physics.

[11]  G. Herman.  Correction for beam hardening in computed tomography. , 1979, Physics in medicine and biology.

[12]  Matthias Bertram,et al.  Soft-tissue contrast resolution within the head of human cadaver by means of flat-detector-based cone-beam CT , 2004, SPIE Medical Imaging.

[13]  C A Mistretta,et al.  Scatter-glare correction using a convolution algorithm with variable weighting. , 1987, Medical physics.

[14]  R. Kruger,et al.  Scatter estimation for a digital radiographic system using convolution filtering. , 1987, Medical physics.

[15]  L. Feldkamp,et al.  Practical cone-beam algorithm , 1984 .

[16]  Carey E. Floyd,et al.  Comparison of contrast-to-noise ratios for Bayesian processing and grids in digital chest radiography , 1999, Medical Imaging.

[17]  Carey E. Floyd,et al.  Improved image quality with Bayesian image processing in digital mammography , 2000, Medical Imaging: Image Processing.

[18]  K. Bae,et al.  Efficient correction for CT image artifacts caused by objects extending outside the scan field of view. , 2000, Medical physics.

[19]  J C Gore,et al.  The reconstruction of objects from incomplete projections , 1980, Physics in medicine and biology.

[20]  Avinash C. Kak,et al.  Principles of computerized tomographic imaging , 2001, Classics in applied mathematics.