The role of CNT in improving the mechanical strength retention rate of C/C composites during heat treatment

[1]  Hejun Li,et al.  Lightweight and flexible 3D graphene microtubes membrane for high-efficiency electromagnetic-interference shielding , 2020 .

[2]  Yulei Zhang,et al.  Improving the flexural property and long-lasting anti-ablation performance of the CVD-HfC coating by in-situ growing HfC nanowires , 2019 .

[3]  Hejun Li,et al.  Enhancing both strength and toughness of carbon/carbon composites by heat-treated interface modification , 2019, Journal of Materials Science & Technology.

[4]  Hejun Li,et al.  Realizing the synergy of carbon nanotubes and matrix microstructure for improved flexural behavior of laminated carbon/carbon composites , 2018 .

[5]  Q. Fu,et al.  Optimizing matrix and fiber/matrix interface to achieve combination of strength, ductility and toughness in carbon nanotube-reinforced carbon/carbon composites , 2017 .

[6]  Christina M. Rost,et al.  Radial growth of multi-walled carbon nanotubes in aligned sheets through cyclic carbon deposition and graphitization , 2017 .

[7]  Hejun Li,et al.  Three-dimensional carbon/carbon composites with vertically aligned carbon nanotubes: Providing direct and indirect reinforcements to the pyrocarbon matrix , 2016 .

[8]  Hejun Li,et al.  Effects of high-temperature annealing on the microstructures and mechanical properties of C/C–ZrC–SiC composites prepared by precursor infiltration and pyrolysis , 2016 .

[9]  Xiaohong Shi,et al.  Effect of high temperature heat treatment on the ablation of SiC–ZrB2–ZrC particles modified C/C composites in two heat fluxes , 2015 .

[10]  X. Xiong,et al.  Residual thermal stresses in carbon/carbon–Zr–Ti–C composites and their effects on the fracture behavior of composites with different preforms , 2015 .

[11]  J. Maria,et al.  Structural annealing of carbon coated aligned multi-walled carbon nanotube sheets , 2014 .

[12]  L. Manocha,et al.  Synthesis and microstructure analysis of aligned carbon nanotube/pyrocarbon composites , 2014 .

[13]  A. Baranov,et al.  Annealing-induced structural changes of carbon onions: High-resolution transmission electron microscopy and Raman studies , 2014 .

[14]  H. Sano,et al.  A layer-by-layer deposition mechanism for producing a pyrolytic carbon coating on carbon nanotubes , 2013 .

[15]  Jincai Zhang,et al.  Microstructure and thermal/mechanical properties of short carbon fiber-reinforced natural graphite flake composites with mesophase pitch as the binder , 2013 .

[16]  Hejun Li,et al.  Increasing mechanical strength retention rate of carbon/carbon composites after graphitization by grafting straight carbon nanotubes radially onto carbon fibers , 2013 .

[17]  W. Yonggang.  Hydrothermal Treatment Affected to Pore Structure and Surface Property of Shengli Lignite , 2013 .

[18]  Hejun Li,et al.  Grafting straight carbon nanotubes radially onto carbon fibers and their effect on the mechanical properties of carbon/carbon composites , 2012 .

[19]  R. Luo,et al.  Compressive fracture behavior of 3D needle-punched carbon/carbon composites , 2011 .

[20]  M. Endo,et al.  The effect of nanotube alignment on stress graphitization of carbon/carbon nanotube composites , 2009 .

[21]  Sarnjeet S. Dhesi,et al.  Catalyst‐Free Efficient Growth, Orientation and Biosensing Properties of Multilayer Graphene Nanoflake Films with Sharp Edge Planes , 2008 .

[22]  Michael J. Hoffmann,et al.  Influence of heat treatment on microstructure and mechanical properties of CVI-CFC composites with medium and highly textured pyrocarbon matrices , 2008 .

[23]  Harald E.N. Bersee,et al.  Residual stresses in thermoplastic composites - a study of the literature. Part III: Effects of thermal residual stresses , 2007 .

[24]  A. Crosky,et al.  The effect of carbon fabric treatment on delamination of 2D-C/C composites , 2006 .

[25]  Linghui Meng,et al.  Effects of ozone method treating carbon fibers on mechanical properties of carbon/carbon composites , 2006 .

[26]  R. Luo,et al.  Influence of high temperature heat treatment on the friction properties of carbon/carbon composites under wet conditions , 2005 .

[27]  C. Sauder,et al.  The tensile properties of carbon matrices at temperatures up to 2200 °C , 2005 .

[28]  M. Monthioux,et al.  Chemical vapor deposition of pyrolytic carbon on carbon nanotubes. Part 2. Texture and structure , 2005 .

[29]  A. Jorio,et al.  Influence of the atomic structure on the Raman spectra of graphite edges. , 2004, Physical review letters.

[30]  H. Estrade-szwarckopf.  XPS photoemission in carbonaceous materials: A “defect” peak beside the graphitic asymmetric peak , 2004 .

[31]  S. Dhakate,et al.  Effect of carbon fiber surface functional groups on the mechanical properties of carbon-carbon composites with HTT , 2003 .

[32]  G. A. Webster,et al.  Fracture mechanics analysis of a crack in a residual stress field , 2000 .

[33]  Y. Hishiyama,et al.  X-ray diffraction in oriented carbon films with turbostratic structure , 1995 .

[34]  J. Casado,et al.  Raman spectroscopic characterization of some commercially available carbon black materials , 1995 .

[35]  William B. White,et al.  Characterization of diamond films by Raman spectroscopy , 1989 .